|
|
| Products 91 to 120 of 172 |
2-PC BALL VALVE,
SS316/304/WCB BODY,
FULL BORE/ REDUCED BORE,
WITH/WITHOUT (DIRECT) MOUNTING PAD ISO5211
THREADED END
|
|
The VENUS ball valve, with full bore, guarantees a high working reliability at low pressure in gas installations: is certified DIN DVGW by the German gas institute, and BRITISH GAS by the British gas institute.
Blow-out proof system, with perfect air bubble sealing, does not need any maintenance. The patented outside sealing system guarantees the maximum reliability during the time.
1 O-Ring in NBR for sealing at low pressure and vacuum.
All valves are tested at 25 bar pressure, for a period longer than 48 hours.
|
|
CONSTRUCTION
Reduced bore, one piece body, floating ball, high performance low emission double stuffing box, relief seats, anti-static device, fire safe, pressure balance hole in ball, blow-out proof stem.
CHARACTERISTICS
High performance, low emission double stuffing box.
Internal wetted parts are acc. NACE Standard MR0175.
|
|
Series 040/050 - DN06 to DN50 PNO-16
Available with DVGW registration stampings
Fields of application :gas
|
|
Description:
The Becker FPCV-T0 Full Port Control Valve is a trunnion-mounted rotary control valve designed for monitoring or mild-duty service above ground and heavy duty service below grade. The FPCV-T0 features a rugged design that provides maximum capacity with minimal full-open pressure drop. The FPCV-T0 features a side-entry, forged body and end closures that allows easy maintenance or repair of the control valve. The FPCV-T0 is ideal for use as a monitor over-pressure regulator or other mild-duty service. The FPCV-T0 is available in a variety of configurations from 2” (50 mm) bore to 42” bore (1050 mm).
|
|
Description:
The Becker QTCV-T1 Quiet Trim Control Valve is a trunnion-mounted rotary control valve designed for general control valve service. The QTCV-T1 features a rugged design that provides moderate noise attenuating capabilities with extended an turndown ratio. The QTCV-T1 features a side-entry, forged body and end closures that allows easy maintenance or repair of the control valve. The QTCV-T1 is ideal for use as a flow control valve or pressure control valve where predicted noise does not pose a problem. The QTCV-T1 is available in a variety of configurations from 4" (100 mm) bore to 36" bore (900 mm).
|
|
|
Autoclave's high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety of valve styles, sizes, and process connections for pressures to 20,000 psi. Our unique design innovations include an integral one-piece trunnion mounted ball and stem that eliminates the shear failure common in two piece designs, re-torqueable seat glands that result in longer seat life, and lower friction stem seal that reduces actuation torque and enhances cycle life.
|
|
The ALBA 2-piece ball valve, with full bore, is used as an ON-OFF valve for: chemical products, for water and pneumatic installations, gas, water, vacuum. For steam within limited working conditions and with special seats. All parts have to be adequately degreased if the valve have to be used for oxygen.
Temperature: For fluids from -20°C a +150°C
Pressure: For fluids from 100 bar to 40 bar
|
|
Hydratron can supply from stock a wide range of High Pressure Ball Valves suitable for either gas or liquid service at pressures of up to 20,000 PSI (1,400 Bar )
Valves can be supplied with NPT, Medium Pressure, or High Pressure connections with wetted parts manufactured from 316 Stainless Steel.
Both 3 and 2 way models are available which can be fitted with air actuators if required.
|
|
The H27 Series is built for endurance and specifically designed for High Pressure applications, with a working pressure range up to 6,000psi; ANSI Class up to 2500.
The unique ball and seats configuration assures smooth two-way flow, tight shut off and instant adaptability to changing pressures and temperature variations. The H27 Series delivers reliable performance in the most demanding applications such as offshore, petrochemical and oil refining. The H27 Series features long-life valve construction for less maintenance, and comes in carbon, steel, stainless, steel and various exotic materials. A range of end connections can be used such as welded, threaded and any flange type. Other options available include High Cycle Operation, Fire Safe, NACE and more.
Application
- Offshore drilling
- Oil & Gas production
- Chemical
- Petrochemical
- Refining
- Energy
|
|
High pressure ball valves:
This range offeres a reliable option for the high pressure application. These valves are recommended for the use in Oil, gas,petrochemicals where the long life is required.
|
|
Series 700 - DN13 to DN25
Body, ball, stem : steel or stainless steel. 1.4571
Fields of application:
hydraulics, high pressure cleaning systems, press vehicles, pressure test equipment (Seats and seals adapted to application)
|
|
3-PC HIGH PRESSURE BALL VALVE
RATING: 3000WOG/ 200BAR
2000WOG/ 130BAR
FULL/ REDUCED BORE
S.S.316/ S.S.304/ WCB BODY
THREADED/ SOCKET/ BUTT WELD
WITH/ WITHOUT API 607 FIRE SAFE
NORMAL/ DIRECT MOUNTING PAD ISO5211
|
|
2-PC HIGH PRESSURE BALL VALVE
RATING: 6000 WOG/ PN414
FULL BORE, THREADED END
SS316/ SS304/ WCB BODY
WITH/ WITHOUT MOUNTING PAD ISO5211
|
|
Jacketed Plug Valves
TUFLIN® Jacketed Plug Valves
Our jacketed plug valves offer all the proven design attributes of standard standard 2-way plug valves and are available in a wide range of different jacket connections.
Typical applications:
TUFLIN® jacketed valves are especially used for media that might crystallize or seize and therefore must be influenced through additional heating or cooling.
|
|
SchuF invented the Lift Plug Valve in 1914. Since then, it has delivered plug valves to the Chemical, Refinery, Delayed Coking, Polymer, Cement, Mining and Power industries.
Lift Plug valves as suitable for a variety of applications such as isolation, or switching where the medium is highly abrasive, or operating conditions are severe - such as very high temperatures.
SchuF produces a special range of lift plug valves for the coking industry - the IsoPlug and SwitchPlug range.
|
|
The GHILUX ball valves are shutoff valves type ON-OFF. The opening and closing functions are made by hand, acting on the control spindle of the ball with the handle, or operated with a spanner or screwdriver.
The main characteristics of these valves are the different versions and the reduced dimensions, which have been carefully studied
British Gas approved
The ball valves are available in the following sizes:
tube from 6 up to 18;
thread of 1/8 to 3/4.
|
|
Beswick Engineering now offers a series of miniature ball valves in standard shut-off (MBV-1010), 3-way diverting (MBVT-1010) and 3-way mixing diverting (MBVMD-1010) configurations. Designs offer compact size, light weight and non-restricted flow and are an outstanding choice for applications up to 250 psig.
The standard shut-off valve weighs approx. 9 grams in stainless steel and the 3-way diverting and 3-way mixing diverting valves weigh approx. 12 grams in stainless steel. The mixing diverting valve allows either port to be individually selected or both ports to be simultaneously selected with no shut-off. All of these valves utilize 316 SS ball elements and are available with a variety of seals. Inlet and outlet ports are 10-32 UNF standard, with other sizes available on request.
Body Material: 303 or 316 stainless steel.
Seals: Buna-N. Optional Materials: EPDM, Viton®.
|
|
APPLICATIONS
HCV6 Series valves are ideally suited to mobil
plant and industrial applications, particularly
those involving high pressure pulses. Also
general applications where a robust, high
pressure changeover valve is required.
CONSTRUCTION Body and connector are zinc plated steel. Handle - steel forging, zinc plated. Ball seals - DELRIN (polyacetalic resin) Shaft seal - nitrile.
TECHNICAL DETAILS Pressure rating - up to 500 bar continuous. Operating fluid - mineral oil. Handle travel - 90° arc.
SPECIAL TYPES
We are always pleased to discuss customer
requirements for non-standard valves. Please ask for
our Technical Sales Department.
|
|
General information
* nominal diameters from 4 to 65
* nominal pressures up to 500 bar (7250 PSI)
* with optional pneumatic, electric or hydraulic actuator
* also available with position indicator, limit switch, proximity switch or locking device
* with floating ball
o with threaded connector
o as combination
o with SAE-flange connection
o for manifold mounting
o for manifold insertion as cartridge type
* with trunnion ball
o with threaded connector
o as combination
o for manifold mounting
|
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs. A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety.
The new patented Dual Block® system allows a proper nut tightening, without any risk for unscrewing due to vibrations.
|
|
The J+J electric actuator is widely used in the plastic valve market because it has a plastic housing making it light in weight, and as it has more standard features than any of its rivals, offers exceptional value.
The new J3 Series electric actuators offer an LED status light and plug & play conversion kits that change the function from on-off to failsafe, or modulating, or both.
|
|
2-Way Poly KZValve (shown with KZCO's EH2 actuator)
VALVE FEATURES:
- Valve Sizes from 3/4" to 2" Full Port Single Valves
- Valve body available in poly or nylon
- Ball and Stem: 316SS
- Seat: Virgin PTFE
- Stem Seal: Dual VITON O-Ring
- Body Seals: EPDM
- Max PSI 150 @70F (Poly)
- Max PSI 300 @70F (Nylon)
- Wiring (most configurations available)
- FNPT or Flanged outlets available
- Quick Hairpin (QH)(1" Only)
ACTUATOR FEATURES:
- High quality, durable actuator housing rated NEMA 6P for waterproof applications and NEMA 7D for Ignition Protection applications
- 12/24 VDC and 24 VAC operation available
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof wire plug connectors
- Private labeling available
Consult our Engineering or Sales staff for application assistance.
|
|
|
Cam-Line plastic-lined trunnion ball valves offer the same proven design benefits as the Cam-Tite product line, including tight shut-off, reliable stem sealing, and unsurpassed torque reduction—all unique features in a plastic-lined ball valve design. With special Tefzel or polypropylene linings and option PVDF coatings, Cam-Line ball valves are well suited for highly corrosive applications within the chemical processing industry such as sulfuric and hydrochloric acid.
|
|
The VKD is a True Union ball valve, particularly suitable for industrial applications, where high performances and long time reliability are a must.
The patented Seat Stop® system assures great longevity of the seals in situations where vibration or thermal expansion occurs. A micro-adjusting of the PTFE seals is also allowed.
As any accidental loosening of the ball carrier is not possible, the radial dismounting of the valve body can be done in full safety.
The new patented Dual Block® system allows a proper nut tightening, without any risk for unscrewing due to vibrations.
|
|
|
|
|
|
Rugged, Compact Design:
Hayward's rugged, low cost QIC2 all plastic PVC ball valves incorporate many design features found only on higher cost ball valves. Features such as PTFE seats, full porting and a 150 PSI pressure rating are all standard on every size of QIC2 ball valves.
Cost Sensitive Applications:
The QIC2 ball valve is perfect for OEM and other applications that require a reliable ball valve at an economical price. The QIC2 valve has been designed and tested to make certain it will perform year in and year out in the most demanding applications without leakage or failure. The internal components of the QIC2 ball valve are completely encapsulated inside the one piece valve body which means that the valve never requires adjustment. The QIC2 valve is ready to be put into service right out of the box.
Lightweight and Compact:
QIC2 lowcost ball valves are designed to fit into spaces too small for other valves. They are about 1/3 the overall size of a true union ball valve and they weigh an average of 50% less. This makes them ideal for skid mounted and other applications where space and weight are critical considerations.
Can't Rust, Won't Corrode:
Their all plastic construction means that they will never fail, stick, or jam because of rusted or corroded parts. And they'll work in places and environments where metal valves must be painted or coated just to survive.
|
|
|
|
|
|
TORK Pneumatic actuated valves are two types
1.Pneumatic actuated ball valves
2.Pneumatic actuated butterfly valves
click fore more information http://www.sms-tork.com.tr/default.aspx?pid=51091&grpID=6608
T-PAV 900 Series Pneumatic Actuated Valves;
double acting actuated ball valves and single acting actuated ball valve ,3 position actuated ball valves
TORK Pneumatic actuated valves accessories :
1)solenoid valves, 5/2 or 3/2 way(namur standard or standard type).
2)Limit switch box (shows valve position,and takes electrical signal )
3)positioner(proportional control application)
4)mounting kits(non standard valves)
5)Ex-proof solenoid valves
6)manuel ovirride
7)I/P Converter and PID control panel
TORK ball valves;
Flange,screwed,welding connection,or mono block body. way : 2/2 and 3/2 ,
body: brass,stainless steel,PVC, carbon steel,carbon casting
TORK pneumatic actuators ; double acting,single acting,3 position,180 degree turn.
Ball valve specifations: valve size,connection type of valvei,valve pressureclass,fluid pressure,valve way,valve body meterial, fluid type,fluid temperature, howmany pcs should valve open-close per day after ball valve can be select.
Certificates:CE(TUV) , ISO9001:2000 TUV, GOST, TSEK, LOYD,UNSEPRO
|
|
|
|
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’
|
|
|
|