|
|
Instrument Ball Valve:
Features:
• 2 way ON-OFF valve, 3 way and 5 way switching valve and 4 way cross over valve models are made.
• One-piece ball stem eliminates backlash to ensure alignment of ball and orifice.
• Blowoutproofbottomloadedstem.
• Heavy directional black unbreakable handle
• Panel mounting facility and low operating torque
• Series of end connections W 3/8", 1/2" double or single ferrule tube end or male/female NPT, BSP pipe end.
• Pressure rating up to 2000psi at 100 F
• Material of construction: SS 304/316, Brass.
• 100% factory tested.
|
|
|
Ball valves are durable and usually achieve perfect shutoff, even after years of use. They are an excellent choice for shutoff applications and preferred to globe valves and gate valves for this purpose.
|
|
Specifications:
- Pressure Rating: 125 PSI air
- Temperature Range: 40 F to 140 F
- Two piece, Full port valve with threaded ends
- Handle: Tamper proof lockout feature locks in the closed position only
- Exhaust port is tapped 10-32 UNF thread for mounting mufflers or to direct air
|
|
Series 040 - DN04 to DN25
Body, ball, stem : sieel
Fields of application:
hydraulics, particularly in construction industry and agricultural machinery, mining industry, paint industry. (Coating, seats and seals adapted to application)
|
|
Similar in design to the one-way valve, the two-way valve performs a different function.
Usually used as a compartment or tank switching valve, the two way valve has three ports - one inlet and two outlets. The valve directs the flow from the inlet to either of the two outlets.
Features apply equally to both one way and two way designs. Available with a wide selection of end connections and activation configurations.
|
|
3-PC SANITARY BALL VALVE
SS316 BODY, FULL BORE, BUTT WELD OR CLAMP END
WITH OR WITHOUT POLISH OUTSIDE,
WITH/WITHOUT (DIRECT) MOUNTING PAD ISO5211
1000WOG, USED FOR FOOD/SANITARY PIPE LINE
|
|
General information
* high-grade materials like steel, stainless steel or aluminium
* for pressures up to 1500 bar (21750 PSI)
* with optional pneumatic, electric or hydraulic actuator
* also available with position indicator, limit switch, proximity switch or locking device
* with threaded connector
o with DVGW-approval
o with removable centre
o with automatic pressure relief
o with additional miniature test point outlet
o as combination
o with spring-return and integrated check valve
o for support cylinder control
+ with integrated, pilot-operated check valve
+ without check valve
* with flange connection
o with SAE-flange connection
o with DIN-flange connection
* with welding-end
o with removable centre
* with staple-lock connector
* for manifold mounting
* for manifold insertion as cartridge type
|
|
3 WAY/4 WAY BALL VALVE
THREADED END OR FLANGED END
WITH OR WITHOUT (DIRECT) MOUNTING PAD ISO 5211
1000 WOG OR DIN PN16/40/ANSI 150L
STANDARD /FULL BORE
PORT TYPE: L/T/X
|
|
TRIFLUX series is available both with L and T bore and allows to divert the flow in all directions including the inlet shut off, applicable to each of the three threaded ends. It is suggested for gas and water distribution, industrial and civil heating, water plants at medium pressure, hydraulics and pneumatic, non aggressive media and vacuum.
|
|
|
|
|
|
Flow Patterns:
Hayward Manual Three-Way Ball Valves come standard with a two port "TW" ball allowing for three flow configurations within 180 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port, out the right port or shut off. Hayward Actuated Three-Way Ball Valves come standard with a three port "NT" ball allowing for two flow configurations within 90 degrees of rotation. With the bottom port as the inlet, the flow can be directed out the left port or out the right port, there is no shut off position. A "TW" ball, used with with the proper electric actuator, adds what is typically called a "center off position" to the "NT" flow pattern of actuated valves. An optional "TP" ball, used with either manual or actuated valves, allows flow through all ports at the same time or flow shutoff.
True Union Design:
This makes these valves very easy to maintain by allowing for easy removal from a piping system without breaking down the piping connections. Just unscrew the three assembly nuts and lift the valve body out of the line.
Easy to Actuate:
A manual valve can be easily automated. Just remove the handle and install the optional actuator mounting kit. The mounting saddle is integrally molded into the valve body. For rock-solid actuator mounting, the valve incorporates a unique design whereby the mounting bracket mounts directly to the valve body. This assures proper alignment of the actuator to the valve without creating any damaging side loads to cause premature stem seal failure.
No Metal, No Corrosion:
Hayward all plastic three-way valves contain no metal parts. The valves will never fail because of corrosion and they do not require painting or epoxy coating to stand up to aggressive environments.
|
|
GENERAL DESIGN
The floating ball is held between two pre-compressed
seals which ensure a tight, non-leak fit at both positive
and negative pressures. The ball’s rotational angle is
constrained by a stop pin and disc.
Cranked handles are incorporated to provide good
clearance for the operators hands.
Flat handles can be provided on request.
FEATURES Full bore valves provide an unrestricted flow path for
negligible pressure drop. Floating ball on pre-compressed seals minimises
wear and provides an excellent seal at positive and
negative pressures. High working pressures - see table on page 59. Operating temperatures from -20°C to +100°C.
1
4 Open to close in
/ turn (90°).
|
|
Series 100 - DN04 to DN50
Body, ball, stem : steel
Fields of application:
hydraulics, particularly in construction industry and agricultural machinery, mining industry, paint industry. (Seats and seals adapted to application)
|
|
3-way Plug Valves
TUFLIN® 3-way Plug Valves for complex piping systems
The design and sealing principle of the TUFLIN® 3-way plug valve is based on the proven 2-way plug valve design. All configurations are suitable for more flexible and complex piping systems and applications.Typical applications of multiport plug valves:
* as changeover valves for pressure relief duties
* for by-pass or mixing operation purposes
* as switchover valves for filtration circuits
* in the pulp and paper industry
* in filtration or drying plants
|
|
|
|
|
|
Ball valves
Stainless steel range, for industry
Manual ball valves, in S.S316, with padlocking handle :
- One piece body valve with female/female ends (threaded BSP), nominal size 1/4" to 2"
- 2 parts body valve with female/female ends (threaded BSP or NPT) 1/4" to 3"
- 2 parts body valve with male/female ends (BSP), 1/4" to 2"
- 2 parts body valve with male/male ends (threaded BSP), 1/4" to 2"
- 3 parts body valve with female/female ends (threaded BSP), 1/4" to 4",
with or without ISO mounting socket
- 3 parts body valve to be welded (Socket or Butt welding) 1/4" to 4",
with or without ISO mounting socket
- between flanges ball valve 10/16 bars, 1/2" to 4"
- 2 parts ball valve with flanged end, 1/2" to 4"
- 3 parts ball valve with flanged end, 1" to 4"
- 3 way - threaded end ball valve (BSP) nominal size 1/4" to 2", with ISO mounting socket
- 3 way - flanged end ball valve 10/16 nominal size 1/4" to 2", with ISO mounting socket
Motorised ball valves :
- With pneumatic actuator
- with electric actuator
- many possible options
We also have a "brass" range of ball valves for home, industrial, or gas use...
|
|
|
|
|
|
PNEUMATIC / MANUAL BALL VALVES
The ball valves BUROCCO INOXVALVOLE are charaterized by their innovative shape and adopted technical solutions.
- Up to 5 utilizing ways.
- Autoadjustable gaskets on ball and stem.
- Rotating stem and ball on bearings in PTFE opportunely modified for the utmost working precision and the life of the seat balls.
- Valve dismantling without removing the pipes.
- Rapid replacement of seat balls and stem gasket.
- 2 way versionwith rotation in any position on 360°C even after the installation.
- Besides 3-4 way valves it is possible to have a version with way on the ball rotation axle which extends the application field of the valve considerably, for example: 2-3- way angle, 2-3-4 way with drain, sample collection or data receipt (temperature, pressure, capacity, etc.); 2-3-4-5 way with washing.
- Special applications in combination with on/off, unidirectional and safety valves, with filters, etc.
- Possibility to seal the interspace between ball and body valve through injection of material inert to corrosive fluids (max working temperature 80 °C).
- Application of connections for pressure washing interspace ball/body during the normal working cycle, avoiding contamination among differerent fluids.
|
|
Cepex offers a complete range of ball valves in PVC-U and PVC-C (both manual and automatic), featuring the "Antiblock" system which prevents ball jamming. Valves are 100% hydro tested prior to leaving the factory, and their reliability is further guaranteed by the world's premier certification institutes.
Ball valves are available in accordance with several dimensioning standards (Metric, BSP, ASTM, NPT, British Standard, JIS...) in order to meet the requirements of any market.
|
|
Automated Ball Valve - Series BV2
Full Port, Stainless Steel Construction, Rated 1000 psig (WOG), Electric and Pneumatic Actuators
Automated Ball Valve - Two-Way Plastic - Series PBV
PVC or CPVC Construction, Electric and Pneumatic Actuators
Automated Ball Valve - Three-Way Plastic - Series 3PBV
PVC or CPVC Construction, Electric and Pneumatic Actuators
Two-Piece Ball Valve - Series BV2M
Full Port, Stainless Steel Construction, Rated 1000 psig (WOG), Actuator Mounting Pad
Two-Piece Ball Valve - Series BV2MB
Full Port, Economical, Rated 600 psi (WOG), Blowout-Proof Stem
Three-Piece Sanitary Ball Valve - Series BV3HL
Hand Lever, SS Construction, Cavity filled
Three-Piece Sanitary Ball Valve - Series BV3HL-3A
Hand Lever, Cavity filled, Meets 3A Sanitary Standards
True Union Ball Valves - Series TBV
PVC Construction, Full Port, Economical
|
|
The TOTAL ball valve, with full bore, is an extremely robust product with perfect air bubble sealing
does not need any maintenance, is equipped with wrapping seats ensuring long life cycles. The patented outside sealing system guarantees the maximum reliability during the time.
The valve is approved according the DIN-DVGW standards: such approval was obtained for the first time in 1974 and then always renewed up to the present one. All valves are tested at 25 bar pressure, for a period longer than 48 hours.
|
|
Ball valves
DN 6 – 100; valve bodies in PVC-U, PP, PVDF (pressure 0 – 10 bar; operating temperature -10 to 80°C), stainless steel (pressure 0 – 60 bar; operating temperature -20 to 600°C), body versions: straight through body (2/2-way valve), T-valve (3/2-way valve); seal materials in FPM, EPDM, PTFE; connections: threaded socket, solvent cement socket, butt weld spigot, flange; manual, pneumatic and motorized operators
|
|
|
Cam-Tite ball valves are engineered to provide the very best performance for demanding hazardous and corrosive applications. Designed to overcome such inherent valve problems as high operating torque and stem leakage, Cam-Tite ball valves feature a unique, non-spherical ball with a bevel at the lip of the port. This configuration minimizes pressure on the seating areas, thus reducing cold flow and prolonging seat life.
|
|
|
The Legris range of ball valves, including standard, axial, and needle valves, provides a reliable means of opening and closing fluid systems.
|
|
|
for corrosive and high-purity fluids in chemical, pharmaceutical, semiconductor and industrial application, manual or automated, ISO + ASME/ANSI, up to 200°C (400°F)
|
|
Two-way and three-way ball valves which can be handled both by hand or through pneumatic and electric actuators.
Pressure interval: 50 bar / 210 bar
Temperature interval: -20ºC / 200ºC
Connections: from 1/4" to 3"
Made in several alloys.
|
|
|
|
|
|
Series 77 Ball Valves feature a high quality 316L investment casting. They are available with sanitary clamp or orbital tube OD ends. Select the cavity filled or non-cavity filled design. Superior leak protection is accomplished by using a patented live-loaded packing system featuring Bellville washers and double "V" ring packing. An ISO 5211 mounting pad is provided for easy automation.
Direct Mount, easy to automate
Sizes 1/2'' to 4"
Cavity filled and non-cavity filled
ISO 5211 Mounting Pad
800/1000 PSI
316L Body Ball and Stem Full Port
Sanitary clamp ends or extended tube OD ends
Excellent for Pharmaceutical and food & beverage
Main valve components are made from 316L stainless steel
Body, and ends are 316L CF3M ASTM A-351 investment cast stainless steel
Ball is machined from 316L CF3M ASTMA-351 cast stainless steel
Stem is machined from ASTM A-493 316L bar stock
Full traceability on all wetted parts (MTR's)
Standard internal polish is 15 Ra and is polished to meet ASME BPE specification DT-12 and Table SF-6 as required.
Standard seats TFM (FDA, USP 23 Class VI) TFM (TFM is a trademark of Dyneon)
Stem packing TFM
Full port to I.D. of tubing for reduced pressured drop
Bottom entry 316L pyramidal live loaded blow out proof high cycle stem adjusts to temperature and pressure fluctuation Locked stem nut to prevent loosening after continuous valve actuation
Dual anti-static devices on stem (contact between stem and ball, and stem and valve body)
ISO 5211 direct mounting pad
Direct mount actuation 1/2" to 4"
Handle locking device when manually actuated
3-piece body construction for ease of repair
Open bolt design to facilitate full external cleanability
Clamp, extended butt weld, or clamp by extended butt weld.
Clamp end requirements per ASME BPE 2002 DT-10, per table DT-2
Extended butt weld- 316L CF3M ASTM A-351 controlled chemical composition to ASME BPE 2002 table DT-3 and dimensionally per ASME BPE 2002 table DT-4 and DT-5
Please download our brochure for more sizes & tech specs.
|
|
Mono flange instrumentation valves
Monoflange valves are designed to mount the instrument directly on the flanged inlet. Instrument can be directly mounted on the valve outlet or alternatively remote mounted.
|
|
CONSTRUCTION
Full bore, two piece body (screwed or welded seal), floating ball, high performance low emission double stuffing box, relief seats, anti-static device, fire safe, pressure balance hole in ball, blow-out proof stem.
CHARACTERISTICS
High performance low emission double stuffing box.
Internal wetted parts are in acc. to NACE Standard MR0175.
|
|
Ball valves are most widely used valves in the world. Main advantages aver Needle valve or Globe valves are
1. Ball Valves gives full flow in open position.
2. No throttling or pressure drop across the valve.
3. Useful even for high-density fluid.
4. Contaminated particles dose not affect the flow
5. Full flow at ¼ turn.
'PRIME' make ball valves has been divided into two categories namely Instrument Ball Valve and Process Ball Valve.
|
|
2-Way & 3-Way
For Building Automation, Temperature Controls & HVAC, Hot Water, Steam & Chilled Water
|
|
DESCRIPTION
The Apollo® 82-100 Series is designed as an in-line repairable Bronze Ball Valve. SAE Grade Body Bolts are Standard.
FEATURES
- Adjustable Packing Gland
- Blow-Out Proof Stem Design RPTFE Seats and Seals
- Full Port Ball Configuration
|
|
|
|
Ball valves, Plug valves
