 |
 |
Electric knife gate valve Agilent Technologies - Life Sciences and Chemical
PRODUCT DESCRIPTION Agilent GateKeeper Series Aluminum Gate Valves provide a low-cost, low-particle, low profile means of isolating a high vacuum pump, and are a less expensive alternative to stainless steel valves....
 |
 |
Knife gate valve for slurry 18 - 54" , max. 100 psi | WB series Weir Minerals
Designed as a wide body heavy duty slurry knife gate valve for highly abrasive and corrosive applications. Features - Size range (discharge) 18" through 54" 75 mm to 300 mm - Maximum...
 |
 |
Threaded gate valve max. 25 m³/h | VVG44, VXG44 SIEMENS Building Technologies
2-port VVG44 and 3-port VXG44 valves DN 15 to DN 40 with externally threaded...
 |
 |
Flange knife gate valve DN 80 - DN 600, max. 10 bar | BV EBRO ARMATUREN
The knife gate valve BV is designed, manufactured, inspected and tested according European Pressure Equipment Directive (PED97/23/EG), category II module A1 and therefore CE...
 |
 |
Flange gate valve DN 40 - 300, PN 16 | 11/SF Mival
Nodular cast iron body and bonnet. Stainless steel stem. Nodular cast iron wedge NBR vulcanized. Pressed steel handwheel. Full bore, minimal pressure drop,...
 |
  |
Bi-directional knife gate valve 80 - 600 mm, 10 bar | LKF Flowrox Oy
Knife Gate Valves Flowrox Heavy Duty Knife Gate Valves are built with a cast body and they feature a heavy-duty stainless steel blade. Removable seats on either side of the gate provide a bi-directional bubble tight seal, with no metal parts...
 |
 |
Vacuum knife gate valve max. 4 600 l/s, 1.2 bar, ISO | BGV series EDWARDS
The BGV basement gate valves are a range of stainless steel, bellows-sealed basement isolation valves. They have been designed, in conjunction...
 |
 |
Cast steel gate valve 2 1/2 - 36", class 3 600 | Edward FLOWSERVE
The Flowserve Edward Equiwedge Gate Valve is large bore and created with body guided, split wedges that offer superior leak tightness and performance. These and other features allow this gate valve to work proficiently and consistently. These features include: Reduced torque, thread wear and eliminated galling because the material used has a low coefficient of friction Ready access to...
 |
 |
Steel gate valve max. 3705 psi Flowserve Corporation Europe
The Flowserve Vogt Extended End concept has an inherently greater length-strength ratio than the traditional ''valve with nipple'' welded...
 |
 |
Bi-directional knife gate valve max. DN 50 | HERA-BD KSB
Wafer-type knife gate valve made of grey cast iron, single or two-piece body, bi-directional,...
 |
 |
Flexible wedge gate valve max. DN 800 | STAAL 40 AKD/AKDS KSB S.A.S. - France
STAAL 40 AKD/AKDS - EN gate valves Design: Flanged or weld end gate valve with bolted bonnet, body of forged...
 |
 |
Plastic gate valve 32 - 63 mm, PN 16 | POM series Georg Fischer - Piping Systems
* POM-service valve with soft sealed gate * integrated protection from...
 |
 |
Product description Compact installation dimensions A...
 |
 |
Knife gate valve for bulk products FUH, FUS Coperion
Shut-off valves for bulk materials must close trouble-free in the...
 |
 |
Bi-directional knife gate valve 2" - 36", 150 psi | C67 series ITT Engineered Valves
Size Range 2" – 36" Pressure Rating 2" – 24" 150 psi (10.3 bar) CWP (cold...
 |
 |
Plastic knife gate valve DN 25 - 100, max. 3.5 bar PRAHER VALVES GMBH
• Double O-ring shaft seals (3” x 4” only) fully serviceable • Moulded mounting pads on valve body (3” & 4”) • Moulded tabs on handle and body for installing...
 |
 |
Pneumatically-operated gate valve 15 - 65 mm, 105 °C | RDS1 AMOT
The Roda Deaco Swing Gate Valve is a positive spring operated air intake cut-off device that provides...
 |
 |
Knife gate valve for bulk products DMDS Bühler AG
Oscillating Slide Gate DMDS. Buhler is a leading manufacturer of food processing and animal feed processing equipment. The Buhler oscillating slide gate DMDS is used for the discharge and feeding of free-flowing and non-free-flowing bulk materials. It is specifically designed...
 |
 |
Cast steel gate valve 2 - 56", class 2500 FAMAT
Gate valves are used for shut-off purpose on a pipeline. Famat can supply different types: Gate valves are used for shut-off purpose on a pipeline. Famat can supply different types: Bolted Bonnet, connection NPT, SW, or Flanged,...
 |
 |
Flange gate valve 1 1/2" - 14", 150 psi | P series Asahi/America, Inc.
The gate valve is the most widely used on/off valve for large diameter, full port applications. When the valve is fully open, it allows straight passage through an opening that is essentially the same size as the inside diameter...
 |
 |
Bronze gate valve 1/2 - 3", 200 psi | 101S Conbraco Industries
The Apollo Model 101S (30 Series) Gate valve provides a cost effective “Made in the USA” alternative to globally sourced multi-turn valves. These valves are cast, machined, assembled, and tested...
 |
 |
Electric knife gate valve JACOB DOSATEC
Silo(Redler)-outlet-gates, electrically operated including worm-gear-motor, 230/400 V, 50 Hz, and 2 mechanical...
 |
 |
 |
 |
Flange gate valve 14" - 24", 100 psi | F-617 NIBCO
The NIBCO® alloy iron large diameter gate valve provides full flow with minimal pressure drop. The gate valve features Class 125 flanged, flat face end connections for easy installation and accessibility. Outside screw and...
 |
 |
Unidirectional knife gate valve DN 50 - 600 | VG series TECOFI
GENERAL CHARACTERISTICS Range : from DN 50 to DN 600. Function ON/OFF or regulation. Wafer threaded mounting ISO PN10. Unidirectional...
 |
 |
Knife gate valve for slurry DN 80 - 1500 | model KGA Pentair Valves & Controls
Field-proven Clarkson KGA slurry knife gate valves feature heavy-duty, full port elastomer linings offering the ultimate in protection against heavy slurries. Features & Benefits: Meets a wide range of abrasion, corrosion, temperature, and pressure...
 |
 |
Flange knife gate valve DN 63 - 100 mm | 081 series VAT Vakuumventile AG
Series 081 Insertable gate valve Area of application: Simple...
 |
 |
Flange gate valve 2" - 12", 200 psi | 406-NRS-RW Watts Water Technologies
405-NRS-RW: NRS Flanged Gate Valves Description: Series 405-NRS-RW NRS Flanged Gate Valves...
 |
 |
Knife gate valve for bulk products DN 100 - 300 JACOB DOSATEC
Throttle valves, shut-off valves and...
 |
 |
Cast steel gate valve API 600, 2" - 24" Kirloskar Brothers Ltd.
Rigid and Sturdy Design Low Pressure Loss Long...
 |
 |
Vacuum knife gate valve 1.5" - 12", ISO | GV150 A&N Corporation
Vacuum rating of 1x10-9 torr Bakeable...
 |
 |
The valves, wyes and ball valves are made primarily of aluminum alloy in a heat-treated, fire engine red...
