- Hydraulics - Pneumatics >
- Valve >
- Needle valve
Needle valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.125 in
Pressure: 100 bar
Temperature: 32 °F - 230 °F
The JFC-2A Threaded Flow Control has a maximum operating pressure of 150psig, a temperature range of 32 to 230 degrees Fahrenheit and a 1/8" port. This device also has 10.5scfm airflow adjustable at 100psig. It is a highly efficient ...
Clippard
DN: 0.125 in
Pressure: 50, 100 psi
Temperature: 32 °F - 230 °F
Needle Valve, #10-32 Input Ports Notes K=knob Additional Information Air Flow 5 scfm@ 100 psig Max PSI 2000 psig Ports 10-32 Thread Temperature Range 32 to 230 F
Clippard
Pressure: 0 psi - 300 psi
Temperature: 32 °F - 230 °F
Flow rate: 28, 71 l/min
Panel Mount Needle Valve Notes K=knob Additional Information Air Flow 2.5 scfm@ 100 psig Max PSI 2000 psig Ports 10-32 Thread Temperature Range 32 to 230 F
Clippard
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn ...
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn ...
DN: 8 mm - 25 mm
Pressure: 10,000 psi - 20,000 psi
Needle Valves, SM Series - 20,000 PSI | #20SM4071 Parker Autoclave's SM Series needle valves are a non-rotating rising stem design, with working pressures to 20,000 ...
Parker Hannifin France SAS
DN: 0.063 in - 0.118 in
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 232 °C
Parker Hannifin France SAS
DN: 0.063 in - 0.118 in
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 232 °C
Parker's union bonnet needle valves, U Series have been engineered for use in high pressure and high temperature instrumentation and industrial applications. These severe service needle ...
Parker Hannifin France SAS
DN: 1.5 mm - 12 mm
Pressure: 1 bar - 10 bar
Temperature: 0 °C - 80 °C
... unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to complete the ...
CAMOZZI AUTOMATION
DN: 1.5 mm - 7 mm
Pressure: 1 bar - 10 bar
Temperature: 0 °C - 60 °C
... unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to complete the ...
CAMOZZI AUTOMATION
DN: 0.125 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: 0 °C - 60 °C
... their dimensions and improve their flow rate characteristics. Their construction allows for easy assembly to cylinders and valves and allows the regulation adjustment to be precise and gradual.
CAMOZZI AUTOMATION
DN: 5 mm
Pressure: 0 Pa - 400,000 Pa
Temperature: 5 °C - 70 °C
EVI 005 S, Mini Angle Valve, Manually Actuated • - Two connections required as accessories • - Bellows-sealed • - Service life: 1.5 million operating cycles
DN: 6, 8, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -20 °C - 60 °C
... thread and push-in fitting. The main feature of these valves is that the discharge flow can be adjusted via a pin regulator. This allows you to control the speed of the actuator connected to the valve, ...
DN: 8 mm - 15 mm
Pressure: 320 bar
Temperature: -60 °C - 210 °C
Type 7042 – Low Flow Valve The low flow valve type 7042 with integrated positioner is ideal for precise control at high pressures and very low flow rates. As a safe shut-off valve, ...
DN: 0.063, 0.125 in
Pressure: 8.6 bar
Metal Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when the exact flow rate hasn't been determined ...
DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar
Plastic Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when the exact flow rate hasn't been ...
DN: 0.5 in - 3 in
Pressure: 600 psi
* Investment casting, ASTM-A351, CF8M, Class 600, inside screw and screwed bonnet wedge dise. Intégral seat, Nonrising stem, and Handwheel. Body - CF8M Bonnet - CF8M Disc - CF8M Stem - SUS316 Gasket - Teflon Snap Ring - SUS316 Washer ...
DN: 0.25 in - 1 in
Pressure: 10,000 psi
Temperature: -50 °C - 230 °C
BAR STOCK Body Material: SS316 Size Ranging: %B~r (DN8-DN25) End Connections: PF / BSPT / NPT With T Handle Opération
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow ...
Beswick Engineering Co, Inc.
DN: 0.07, 0.375 in
Pressure: 0 psi - 250 psi
... used to protect a pneumatic actuator such as a chuck, press, or gripper from sudden bursts of high pressure. The internal needle valve restricts the initial movement of the actuator to a user defined ...
Beswick Engineering Co, Inc.
DN: 0 mm - 0.81 mm
Pressure: 0 bar - 34.7 bar
... available. The valve body (elbow) swivels 360 degrees to facilitate installation and orientation. Features: Stainless steel valve seat allows flows to remain steady despite changes in temperature ...
Beswick Engineering Co, Inc.
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
Maximator GmbH
DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
Maximator GmbH
DN: 0.25 in - 14.3 in
Pressure: 1,550 bar
... may contain pressure is fabricated from annealed 316 stainless steel that is compliant with NACE MR0175 standards. Needle valves equipped with metal to metal seats have and increased safety and dependability ...
Maximator GmbH
DN: 8, 20, 25, 10, 15 mm
Pressure: 400 bar
Temperature: -54 °C - 232 °C
NEEDLE VALVE SCREWED ENDS - STAINLESS STEEL 316 (Model : 58523/58525)
DN: 0.5, 0.25 in
Pressure: 250, 400 bar
Temperature: 0 °C - 200 °C
BORED NEEDLE VALVE FOR ISOLATION - STAINLESS STEEL 316L
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... (air) or 3.5 LPM (water) Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are ...
Aalborg Instruments
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F
The CVT™ PTFE needle valve has a simple design consisting of only seven components and one PTFE O-ring. This needle valve operates with a maximum pressure of 75 psig ...
Aalborg Instruments
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °C - 66 °C
The VT PTFE is a needle valve that consists of external components which are non-fluid and made from anodized aluminium. It is available in three overlapping flow ranges and made from PCTFE and PTFE components. ...
Aalborg Instruments
DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
... unnecessary manual adjustments during the operations. Use a slot screwdriver to adjust the needle (speed adjustment). Design without an external needle for speed adjustment. Approx. 2/3 height ...
NIHON PISCO CO., Ltd.
DN: 10 mm
Pressure: 1 bar
Front control valve, inlet and outlet copper tube 10x1mm, for vacuum Needle headwork with fine regulation TECHNICAL FEATURES Media: Vacuum Minimum pressure: down to 1 mbar Fluid identification: ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 10 bar
Front control valve, inlet and outlet copper tube 10x1mm, for compressed air Needle headwork with fine regulation TECHNICAL FEATURES Media: Compressed Air Maximum pressure: 10 bar Fluid identification: ...
Carlos Arboles S.A.
DN: 10 mm
Pressure: 10 bar
Front control valve, inlet and outlet copper tube 10x1mm, for other pressure gases (indicate fluid) Needle headwork with fine regulation TECHNICAL FEATURES Media: Dry Services Maximum pressure: ...
Carlos Arboles S.A.
DN: 3 mm - 28 mm
Pressure: max 413.0 bar
Temperature: -53 °C - 455 °C
... Bar Stock Needle Valve Performance -Rolled threads of packing bolt ensures longer life service -Double lock pins promise steady and durable fastening of valve handle -Stop pin prevents ...
Athena Engineering S.r.l.
DN: 3 mm - 28 mm
Pressure: max 689.0 bar
Temperature: -53 °C - 648 °C
Athena Forged Needle Valve Performance -Compact forged design for high temperature and high pressure -Rolled threads of packing bolt ensures longer life service -Cold rolled threads of valve ...
Athena Engineering S.r.l.
DN: 3 mm - 18 mm
Pressure: max 413.0 bar
Temperature: -53 °C - 260 °C
Athena Integral-Bonnet Needle Valve Performance -Compact valve body -Packing nut makes outside adjusting possible -Full supporting packing reduces adjusting requirement -Cold rolled ...
Athena Engineering S.r.l.
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... a very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials ...
DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C
Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks ...
Metalurgica Zaes S.L.
DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C
Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks ...
Metalurgica Zaes S.L.
DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C
Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks ...
Metalurgica Zaes S.L.
DN: 4.32 mm
Pressure: 0 psi - 5,000 psi
Temperature: -195 °C - 232 °C
Series FNV Needle Valves feature a forged body, integral bonnet design with PTFE and metallic wafer stem packing. This provides leak-tite service from vacuum to the maximum operating pressure. Series ...
Generant
DN: 1.4 mm
Pressure: 0 psi - 1,000 psi
Series PMV Precision Metering Valves are designed for accurate and repeatable flow control of fluids and gases. Valves feature a one-piece forged body and a screwed bonnet design. Stainless steel 3 degree ...
Generant
Pressure: 0 psi - 5,000 psi
Temperature: -195 °C - 204 °C
Series 3000 bar stock, screwed bonnet type needle valves are available in brass, 303 & 316 stainless steel with working pressures to 5000 Psig in 1/8 to 1/2 sizes. The unique, externally adjustable, wear ...
Generant
DN: 2.5 mm
Smooth operating spindle made of PTFE, valve bore: 0-2,5 mm, with retaining device to avoid complete unscrewing, screw cap and retaining device made of PP, operating temperature: -20 to +150 °C, made of DURAN® tubing, ...
DN: 5 mm - 32 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C
Connection 1 + 2 metric cylindrical outer thread Sealing form 1 + 2 24° inner cone Material Brass
DN: 5 mm - 22 mm
Pressure: 200 bar - 400 bar
Temperature: -60 °C - 200 °C
Forged. Housing Material: 1.4571, Spindle Material: 1.4571, Spindle Seal: PTFE, Hand wheel: pressed. Also available with NPT thread - on request. Temperature range: -60 ° C to 200 ° C. At elevated temperatures, please consult the pressure ...
DN: 0.25 in
Pressure: 5,000 psi
Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components ...
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of ...
Hydrabase
DN: 0.875 in
Pressure: 0 bar - 250 bar
Temperature: -54 °C - 204 °C
... orifice, flow restrictor hydraulic valve. The NV10-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of valve. ...
Hydrabase
DN: 0.875 in
Pressure: 350 bar
Temperature: -54 °C - 204 °C
... orifice, flow restrictor hydraulic valve. The NV18-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of valve. ...
Hydrabase
Your suggestions for improvement:
Needle valves are linear devices. The movement of the closure element is perpendicular to the fluid flow.
ApplicationsThese valves are used for precise flow regulation, especially when a low, constant flow is required.
TechnologiesSuch valves have a small orifice with a long, conical seat. The needle-shaped closure element, or plunger fits the seat contours perfectly. Single acting models allow flow control in one direction and free flow in the opposite direction. Double acting valves control flow in both directions.
- Precision
- All-metal construction
- Simplicity
- Stability
- Low flow rate only
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining