|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Get accurate and comprehensive results representing noise phenomena within a portable instrument is what OROS 3-Series offers to acoustics specialists. The 1/n octave band analyzer and the overall level meter (OVA) deliver data complying with international standards within class 1 requirements. Take benefit from the OROS 3-Series mobility for your industrial acoustic measurements and improve your efficiency.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
|
|
|
|
Portable Data Acquisition FFT Analyzer Soundcard. Two high quality, high speed, IEPE simultaneous sampling inputs, 24 bit ADC, for NVH measurements.
RogaDAQ2 datalogger is a high performance portable Data Acquisition Device. It features two high quality, high speed, 24 bit simultaneous sampling inputs, 4 auxiliary inputs, two configurable tacho-inputs and additional digital I/Os.
The main inputs of the RogaDAQ2 are simultaneously sampled precision analog inputs for recording static and dynamic signals. Sampling rates up to 48 kHz at 24 bit resolution are supported. Each channel features instrumentation quality preamplifiers with AC or DC coupling and constant current sensor supply for directly supporting IEPE-type sensors. In addition, the RogaDAQ2 is equipped two highly flexible RPM inputs featuring individual pulse width counters, yielding RPM and phase relative to the main channels. The trigger levels are programmable between +/-25 Volts. In a complex measurement application it is often necessary to measure the main channel inputs in correlation with other data. For this purpose, the RogaDAQ2 features for auxiliary analog channels along with four digital I/Os.
|
|
|
|
|
|
The WCA mini AD3661 - It goes where you go- Portable 4-channel Noise & Vibration Analysis System
- USB bus power unit
- 24 bit, 4-channel measurements
- A channel exclusively for tacho pulse measurements
- WCAPRO (multi analysis software)
- FFT analysis and real-time octave analysis
- Tracking analysis and throughput recording/playback
- Equipped with WCA Lite (easy-to-use analysis software)
* Configuration
Standard configuration
- AD3661 Hardware (size: 30(H) x 139 (W) x 138(D) mm, weight: 330g,
including UBS cable and power adaptor)
- WCA Pro software and license for basic FFT analysis
* Options for WCA Pro software
2D tracking license
3D tracking license
Real-time Octave analysis license
Time-series filtering license
[Features]
A portable and lightweight, USB bus powered unit
The WCA mini is small and light enough to fit into your travel case. Its actual size is Height 30mm (height) x Width 139mm x Depth138 mm (width), and weights is only 330g. Power can be supplied from athe USB bus, allowing you to perform noise and vibration analyses anywhere.
User-friendly GUI and WCA Lite with improved ease of operation
With enhanced operability, the WCA mini has adopted the same design concept employed in the highly reputed WCA. WCA Lite will enable simple operation of FFT and tracking analyses.
Complete compatibility with the CompactWCA/WCAonPC
A compatible user interface eliminates the need for additional training of existing users.
WCAPRO, multi-analysis software
WCAPRO provides real-time FFT analysis for noise & vibration testing.
Please see the AD-3661 catalog for further details.
|
|
LMS Test.Xpress Noise & Vibration Analyzer
LMS Test.Xpress is a no-compromise noise and vibration analyzer and recorder that is designed to do all of this and much more. It combines the ease of use of a traditional analyzer with the high-speed performance and measurement quality of an advanced noise and vibration measurement system.
LMS Test.Xpress integrates over 25 years of experience in noise" and vibration engineering from LMS. It is part of a complete offering of scalable testing and engineering solutions that offer optimal scalability, openness and investment protection. Start with a 4-channel analyzer today, and expand your system to a multi-channel, advanced engineering solution? It’s all possible with LMS Test.Xpress.
|
|
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
KRONOS V is the first turn-key system designed to provide true spectral content based, objective real-time engine knock detection and multi-cylinder acoustic analysis.
Significantly reduces time to map an engine from weeks to hours
Closed loop control of engine mapping process for "lights-out" operation
Improves efficiency by minimizing operator intervention required during tests
Provides superior data capture enabling detection, analysis, and replay of knock conditions
Can be added to most existing combustion systems for complete automated testing
|
|
1121 Audio Analyzer
The Model 1121 audio analyzer provides fast, accurate measurements including frequency, AC or DC level, distortion, SINAD and signal-to-noise ratio. It also includes an audio source providing accurate low distortion signals over wide frequencies and level ranges.
• Frequency range from 10 Hz to 200 kHz
• Low-distortion audio source for testing systems, amplifiers, receivers and components
• Measures AC/DC level, distortion, SINAD, S/N, frequency
• Ten readings per second
• 50-, 150- and 600-ohm output impedances
• 300 µV full-scale range sensitivity
• 70 dB Common Mode Rejection Ratio
• Sweeps frequency or level
• Non-volatile memory for instant recall of up to 99 complete front-panel setups
• IEEE-488 interface
|
|
Digital and analog audio analyzer for production, laboratory and service
While the R&S®UP300 is ideal for numerous analog audio measurements, the R&S®UP350 has added capability for performing measurements on digital audio instruments. For details see R&S®UP300.
|
|
| ... products without technical information |
| |
|
|
|
|
The WCA mini AD3661 - It goes where you go- Portable 4-channel Noise & Vibration Analysis System
- USB bus power unit
- 24 bit, 4-channel measurements
- A channel exclusively for tacho pulse measurements
- WCAPRO (multi analysis software)
- FFT analysis and real-time octave analysis
- Tracking analysis and throughput recording/playback
- Equipped with WCA Lite (easy-to-use analysis software)
* Configuration
Standard configuration
- AD3661 Hardware (size: 30(H) x 139 (W) x 138(D) mm, weight: 330g,
including UBS cable and power adaptor)
- WCA Pro software and license for basic FFT analysis
* Options for WCA Pro software
2D tracking license
3D tracking license
Real-time Octave analysis license
Time-series filtering license
[Features]
A portable and lightweight, USB bus powered unit
The WCA mini is small and light enough to fit into your travel case. Its actual size is Height 30mm (height) x Width 139mm x Depth138 mm (width), and weights is only 330g. Power can be supplied from athe USB bus, allowing you to perform noise and vibration analyses anywhere.
User-friendly GUI and WCA Lite with improved ease of operation
With enhanced operability, the WCA mini has adopted the same design concept employed in the highly reputed WCA. WCA Lite will enable simple operation of FFT and tracking analyses.
Complete compatibility with the CompactWCA/WCAonPC
A compatible user interface eliminates the need for additional training of existing users.
WCAPRO, multi-analysis software
WCAPRO provides real-time FFT analysis for noise & vibration testing.
Please see the AD-3661 catalog for further details.
|
|
LMS Test.Xpress Noise & Vibration Analyzer
LMS Test.Xpress is a no-compromise noise and vibration analyzer and recorder that is designed to do all of this and much more. It combines the ease of use of a traditional analyzer with the high-speed performance and measurement quality of an advanced noise and vibration measurement system.
LMS Test.Xpress integrates over 25 years of experience in noise" and vibration engineering from LMS. It is part of a complete offering of scalable testing and engineering solutions that offer optimal scalability, openness and investment protection. Start with a 4-channel analyzer today, and expand your system to a multi-channel, advanced engineering solution? It’s all possible with LMS Test.Xpress.
|
|
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
APM High Shear Fluid Condition Viscosity Sensor
The APM high shear fluid condition sensor platform is a breakthrough in viscosity sensing applications. The APM fluid condition viscosity sensor is solid state with no moving parts and based on a rugged quartz crystal design. The surface of the sensor is also treated to be scratch and chemically resistant. It operates at 160MHz producing a very high shear rate in liquids. The sensor is fully immersible and can be easily configured for insertion into a myriad of processes. Unaffected by flow or vibration conditions, the APM fluid condition viscosity sensor is operable from 10 to 500 AV (acoustic viscosity). It can be operated in fluids at temperatures ranging from 0°C to +85°C and comes with a smart digital interface.
|
|
|
|
|
|
MCF Low Shear Fluid Condition Viscosity Sensor
The MCF low shear fluid condition sensor platform is the latest in development of breakthrough in viscosity sensing applications. The MCF fluid condition viscosity sensor is solid state with no moving parts and is based on a leading edge crystal design. The surface of the sensor is also treated to be scratch and chemically resistant. The sensor operates at 5.3MHz producing a very low shear rate in liquids which results in better correlation to more traditional viscosity measurement techniques. The sensor is fully immersible and can be easily configured for insertion into a myriad of processes. Unaffected by flow or vibration conditions, the MCF fluid condition viscosity sensor is operable for a wide range of fluids and especially targeted for oil condition monitoring applications. It can be operated in fluids at very wide operating temperature ranges and is available in two product packages. The first configuration, similar to the APM fluid condition sensor, comes in a square format. The second, integrates the sensor and electronics into a threaded bolt configuration (1/2 NPT and BSPT).
|
|
STAR6 Modal
The STAR6 System™ combines the latest structural analysis technology with an intuitive interface based on Microsoft Windows™. From operating deflection shapes to modal and time domain analysis, from advanced analysis of multireference parameter estimation to structural dynamics modifications, STAR6 does it all.
STAR6 Acoustics
Optimized for identifying noise sources and quantifying sound power, CATSAcoustics / STARAcoustics simplifies testing and helps you attain unmatched testing accuracy.
|
|
OOFELIE VibroAcoustics, driven by SAMCEF Field, is a Virtual Prototyping tool for the analysis and design of acoustics and vibro-acoustics situations.
Through the use of SAMCEF Field modeling capabilities, it becomes possible to start simulating the performance of such systems even before a single physical prototype is built.
Design changes can be evaluated faster and in a more affordable manner, reducing the number of actual prototypes required to achieve a required design maturity, thus accelerating significantly product development.
Thanks to such a tool, the engineers acquire a capability to isolate and analyze the effect of each parameter. With such insight available at their fingertips, information can be quickly gained to correct or improve previous designs efficiently knowing which are the influent factors.
Reduced design time, improved quality and reduced costs are some of the benefits one can now reap from using OOFELIE VibroAcoustics, driven by SAMCEF Field.
|
|
|
|
|
|
eZ-Analyst
Real-Time Vibration and Acoustic
Analysis Software for the 600 Series,
WaveBook/516E, and ZonicBook/618E
eZ-Analyst software from IOtech adds real-time continuous and transient data acquisition in the Time, Frequency, or Order domain to 600 Series, ZonicBook/618E, and WaveBook/516E systems. Today’s eZ-Analyst is the compilation of over 10+ years of continuous software development and customer inputs that results in the most versatile vibration analyzer available.
Key Highlights
• Real-time FFT analysis
• Easy-to-use graphical user interface provides
fast setup
• Field expandable from 8 to 56 channels
• Supports four separate tachometer channels
• 3D Color Waterfall Spectrum Display
• Order Normalization and Order Tracked Plots
• Multiple Plot Overlays
• View all functions simultaneously in eight display windows with up to 16 data overlays in each window
• Export your data to Excel, ME Scope, SMS Star, or UFF type 58 ASCII or Binary
• Wide selection of real-time analysis features, including integration/differentiation synchronous averaging, and much more
|
|
|
|
|
|
The Acoustics Module is a world-class solution to all your acoustics modeling needs. Easy-to-use application modes provide the tools to model acoustic wave propagation in air, water, other fluids—and even solids.
It is designed specifically for those who work in classical acoustics with devices that produce, measure, and utilize acoustic waves. Just a few application areas from the audio industry include speakers, microphones, and hearing aids, while those for noise control can address muffler design, sound barriers, and building acoustics.
The modeling of acoustics-structure interaction is easily done with the Acoustics Module. This capability is particularly attractive for appli-cations such as the design of sonar transducers in medical and non-destructive testing applications as well as those used for noise and vibration analyses.
This module also features a special interface for modeling aeroacoustics, which is especially useful for the control of aircraft engine noise. In addition, its general multiphysics ability enhances classical acoustics with further accuracy.
|
|
| ... products without technical information |
| |
|
|
