Amplifiers

Voltage: 18 V - 30 V
Power: 30 W

VM9-GA is a in-process gauging system designed for simple, cost-effective and customized applications. Solutions include gauging of internal, external diameters and thickness both on smooth and on interrupted surfaces. • Compact and ...

Voltage: 18 V - 30 V
Power: 30 W
Frequency: 1 kHz - 1,000 kHz

Touch detection amplifier for grinding machine & machine tool VM9-TD is a touch detection system for machine tools based on the use of acoustic emission sensors (AE). It is designed for simple and cost-effective applications ...

Voltage: 174, 220, 260 V
Power: 15 W

Benchtop optical amplifier is specially designed for laboratory and factory testing. Highly stable components and optical path design are adopted to ensure high-performance spectral characteristics. Unique ATC and APC ...

Voltage: 38 V - 265 V
Power: 50 W

The 50EYA series EYDFA is an optical amplifier offering multi-port signal amplifier ranging from 1535 nm to 1565 nm. The amplifier is designed for applications of CATV and applications ...

Semiconductor optical amplifier module(SOA) is an optical gain module specially designed for O band. It can be widely utilized in 10G/40G/100G communication system with 10dBm maximum optical power. The product can work ...

Voltage: 12 V - 24 V
Frequency: 500 Hz

Suitable for - Glass fiber optics Plastic fiber optics Light source - LED, Red Wavelength - nm Transmitted-signal shape - LED group - Protective circuit - Fiber optic connection - Residual ripple - Open-circuit current ...

Voltage: 24 V
Current: 0 mA - 250 mA

Pyxis is an analogue amplifer for load cells, microprocessor controlled, compact and easy to use. It is installed on flexographic, rotogravure, cutting, etc. machines to detect the tension of the laminates. Its HW/SW con

Voltage: 20 V - 28 V

Lynx DS-L is a digital amplifier for double load cells channel, microprocessor controlled, with a very compact size and easy to calibrate and use. It is usually used on flexographic and rotogravure machines, slitter ...

Voltage: 2.7 V - 12 V
Current: 500 A - 850 A
Frequency: 500 kHz

LMC7101 is a 500kHz gain bandwidth amplifier designed to operate single-ended power supplies with guaranteed performance at supply voltages . LMC7101 features rail-to-rail input and output performance in SOT-23-5 package. ...

Voltage: 1.8 V - 6 V
Current: 100 A - 170 A
Frequency: 1,000 kHz

The MCP6001 is a single general purpose op amp offering rail-to-rail input and output operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is available ...

Voltage: 2.7 V - 6 V
Current: 230 A - 325 A
Frequency: 2,800 kHz

MCP601 operational amplifier (op amp) has a gain bandwidth product with low typical operating current and an offset voltage that is less than 2 mV. The MCP601 uses Microchip's advanced CMOS technology, which provides ...

Voltage: 208 V - 415 V
Current: 1.5, 13, 3.5 A
Power: 10,000, 5,000, 3,000 W

The R&S®BBL200 broadband amplifiers are ideal for applications requiring high RF power. The R&S®BBL200 broadband amplifiers are linear Class A amplifiers and generate 3 kW, 5 kW and 10 ...

Voltage: 100 V - 415 V
Current: 4.4, 9.1 A
Power: 15 W - 3,000 W

The R&S®BBA150 broadband amplifiers cover a total of five frequency bands: 9 kHz to 250 MHz, 4 kHz to 400 MHz, 80 MHz to 1 GHz, 0.69 GHz to 3.2 GHz and 2.5 GHz to 6 GHz. They can be used to address a variety of applications, ...

Voltage: 100 V - 415 V
Power: 15 W - 3,000 W
Frequency: 9 kHz - 6,000,000 kHz

Robust solid state power amplifiers with high availability. Outstanding expertise in amplifier development The R&S®BBA150 broadband amplifiers cover a total of five frequency bands: ...

Voltage: 3.3 V - 5.5 V
Frequency: 10 kHz

The AD8207 is a single-supply difference amplifier ideal for amplifying small differential voltages in the presence of large common-mode voltage. The operating input common-mode voltage range extends from −4 V to +65 ...

Voltage: 5, -1.8, 1.4 V
Current: 276 mA
Frequency: 10 GHz

The ADA4939-1 / ADA4939-2 are low noise, ultralow distortion, high speed differential amplifiers. They are an ideal choice for driving high performance ADCs with resolutions up to 16 bits from dc to 100 MHz. The output ...

Voltage: 5 V - 24 V
Current: 6.4 mA
Frequency: 145 MHz

The AD8065/AD80661 FastFET™ amplifiers are voltage feedback amplifiers with FET inputs offering high performance and ease of use. The AD8065 is a single amplifier, and the AD8066 is a ...

Amphenol's independent amplifier box can be applied to AM, FM, and DAB frequency bands. The amplifier usually matches a corresponding antenna. It comes with a customized harness length and a standard Fakra connector.

Voltage: 1 V - 5 V
Current: 4 mA - 20 mA
Power: 1 W - 1 W

IoT Status Monitoring Amplifiers for General-purpose Analog Outputs Are Connectable to Various Sensors • General-purpose input: Connectable to sensor heads with analog output between 1 to 5 VDC (voltage) or 4 to 20 ...

Voltage: 0 V - 10 V
Current: 0 mA - 40 mA
Frequency: 4 Hz - 700 Hz

UNIVERSAL INSTRUMENTATION AMPLIFIER - 9250 The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, ...

Voltage: 3.8 mV - 9.5 mV
Current: 0 mA - 40 mA
Frequency: 20 Hz - 1,000 Hz

... INSTRUMENTATION AMPLIFIER 9210 The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection ...

Voltage: 0 V - 10 V
Frequency: 1 kHz

... want to put the amplifier onto an existing circuit board or who wish to construct their own housing can also obtain the amplifier as an open circuit board. It can be integrated by means of screw terminals. The ...

Voltage: 24 V
Current: 1 A

Amplifiers Series SKM DC 24 V Analog output Relay output LED display EGE offers thermodynamic flow controllers without moveable parts, which means they are robust and resistant to soiling. Controllers for fluids ...

Voltage: 85 V - 260 V
Current: 4 A

The new amplifier by EGE is specifically designed for flow controllers particularly made to be a user-friendly type of device. The amplifier has a single touch button which can easily be adjusted from ...

Voltage: 230, 115 V
Current: 4 A

Amplifiers Series SKZ AC 230 V 'AC 115 V DC 24 V Relay output LED display Temperature control Turn off delay Flow EGE offers thermodynamic flow controllers without moveable parts, which means they are robust ...

Voltage: 0.02 V - 30 V
Current: 0 mA - 20 mA
Frequency: 50 Hz

... for carrier rail mounting TS 35 Characteristics Isolating amplifiers of the series TV125L are suitable for potential isolation or for conversion of unit ...

Voltage: 20 V - 253 V

Switch amplifiers of the series TS125 and TW255 are used in switch cabinets for the conversion and isolation of digital switching signals, as well as in explosion-prone areas. The devices are available in one- or two-channel ...

Voltage: 0 V - 300 V
Current: 0 mA - 20 mA
Frequency: 47 Hz - 63 Hz

conly one type of device. Alternatively the power supply can be carried out via a mounting rail bus connector. The pluggable terminal strips allow a simple and time-saving wiring. The configuration of input and output signals is done ...

Voltage: 400 V
Current: 40, 13, 26, 52 A
Frequency: 20 kHz

• Mobile power amplifier • AC/DC 4-quadrant amplifier • DC to 20 kHz • Output current max. 52 A ±100 V • Extensive service functions • Intergrated in 19? mobile cabinet Applications Specially ...

Current: 2,000 A

Current amplifier for CPC 100 For your current requirements up to 2000 A The output current of the CPC 100 can be increased up to 2000 A using the CP CB2 current amplifier. The CP CB2 is connected ...

Power: 30 W
Frequency: 10 kHz - 20 kHz

... laboratory and production line testing, with a 2-channel power amplifier. The power supply unit can be used to supply power to the microphone and ear stimulator and other components. The power amplifier ...

Voltage: 5 V - 12 V
Frequency: 4 kHz

Capacitec now offers stand alone dual channel electronic amplifier packages, with a choice of Capteura® 220 series or 520 series dual amplifier cards, housed in the same small rugged aluminum enclosure ...

Voltage: 105 V - 240 V

... as: The modular amplifier cards are designed to operate with every probe diameter configuration and several sensitivity ranges by simple recalibration. For applications that require use of multiple sensors, the ...

Voltage: 0 V - 10 V

The Capteura® 520 Series non-contact displacement, gap and parallelism amplifier is the newest addition to the Capacitec Capteura® Modular non-contact capacitive displacement instrumentation packages and are the next ...

Voltage: 24 V
Current: 50 mA

Strain Gauge Measuring Amplifier DM222 for connecting strain gauge sensors and converting them into analog output signals. Special technical features of the DM222 (2 channel) Strain Gauge Measuring Amplifier ...

Voltage: 24 V
Current: 50 mA

Strain Gauge Measuring Amplifier DM221 for connecting one strain gauge sensor and converting into analog output signals. Special technical features of the DM221 (1 channel) Strain Gauge Measuring Amplifier ...

Voltage: 24 V
Current: 2.5, 5, 10 A

The intelligent AC-servo converter with integrated positioning control LV-servoTEC S2 FS enables extensive parameter setting possibilities for the flexible adaption to your application. The menu-driven parameter setting software S2 Commander ...

Voltage: 0 V - 10 V
Current: 0 mA - 20 mA

External Amplifier IMA2 DMS External amplifier with analog output 0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA for force sensors with strain gauge full bridge For direct connection of strain ...

Voltage: 0 V - 10 V
Current: 0 mA - 20 mA

External Amplifier IMA2 R External amplifier with analog output 0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA for linear and rotary potentiometers For direct connection of potentiometer (linear ...

Voltage: 0 V - 10 V
Current: 0 A - 20 A

External Amplifier IMA2 LVDT External amplifier with analogue output 0…5 V, 0…10 V, ±5 V, ±10 V, 0…20 mA, 4…20 mA for inductive displacement sensors For direct connection of inductive linear sensors Internal ...

Voltage: 100 V - 240 V
Frequency: 60, 50 Hz

The HD2050.20 is a digital signal amplifier, designed to work with HD2050 and HD2050.30 sources to obtain from these maximum acoustic performances. The HD2050.20 amplifier incorporates a white / pink ...

Voltage: 12 V - 24 V
Current: 50 mA

High Performance Single/Dual Digital Display Fiber Optic Amplifiers The BF5 series fiber optic amplifiers are available in single and dual display models. The units feature 5 different response speed ...

Voltage: 12 V - 24 V
Current: 40 mA

Digital Fiber Optic Amplifier Communication Converters The BFC fiber optic amplifier communication converters allow simple management and configuration of BF5 series fiber optic amplifiers ...

Voltage: 12 V - 24 V
Current: 45 mA

Digital Display Fiber Optic Amplifiers The BFA series fiber optic amplifiers feature high-speed response times and various functions to provide reliable detection of small or fast moving targets. The ...

Voltage: 9 V - 40 V
Current: 5 A
Frequency: 50 Hz - 60 Hz

Z112 is an amplifier for ON/OFF sensors and provides a relay output. It’s available as single channel (Z112A) or independent double channel (Z112D). The single channel dispose also of pulse division system (from 1 to ...

Voltage: 9 V - 40 V
Current: 5 A
Frequency: 50 Hz - 60 Hz

Z112 is an amplifier for ON/OFF sensors and provides a relay output. It’s available as single channel (Z112A) or independent double channel (Z112D). The single channel dispose also of pulse division system (from 1 to ...

Voltage: 12 V - 24 V
Frequency: 0 Hz - 400 Hz

Description: - On/Off sensor digital amplifier, 1 relay output Power supply: - 115 / 230 Vac ±10%, 50 - 60 Hz Insulation: - 4.500 Vac (power/input/output) Input: - 1-CH free contact, reed, NPN 2/3 wire @ 12/24 ...

Voltage: 20 V - 30 V

Description Four switching points •Four switching points NO / NC programable •Measured value displayed by amplifier APPLICATION: PLANTS & MACHINES | FOOD & BEVERAGES •Four switching points either NO / NC ...

Voltage: 20 V - 30 V

... Output of the analog value as current or voltage •Analog value with cable breakdown protection •Measured value displayed by amplifier APPLICATION: PLANTS & MACHINES | FOOD & BEVERAGES •One switching point either ...

Voltage: 230 V
Current: 300, 3 mA

Description External Amplifier •NO / NC •Different outputs available •Switching-on and switching-off delay •10...30 V DC / 230 V AC APPLICATION: PLANTS & MACHINES | FOOD & BEVERAGES •NO / NC PNP switching ...

Frequency: 2 MHz

... gauge bridge amplifier is a differential high speed front-end amplifier with high precision. Strain gauges can be connected to the measuring bridge in full bridges, half bridges or ¼ bridge construction. ...

Frequency: 0 Hz - 20,000,000 Hz

The EL-LNA-2 is a 2-channel amplifier manufactured by Elsys. It is designed for any 3rd party data acquisition system. The amplifier offers an option between two gain stages of x10 and x100, both with ...

Voltage: 300 V
Current: 150 mA

... half-rack size, bench-top power amplifier designed for signal amplification. With unprecedented signal purity, Model 9100 amplifies signals from DC to over 500kHz. The unit has a fixed gain of x15 however the same amplifier ...

Voltage: 400 V
Current: 125 mA

Model 9100A was designed as a general purpose, wide band and high voltage amplifier however, with specific applications in mind. It is built in a small case size to save space and cost but without compromising bandwidth ...

Voltage: 0 V - 300 V
Current: 100 mA

... half-rack size, bench-top power amplifier designed for signal amplification. With unprecedented signal purity, Model 9200 amplifies signals from DC to over 500kHz. The unit has a fixed gain of x15 however the same amplifier ...