- Electricity - Electronics >
- Power Supply >
- DC/DC converter
DC/DC converters
Output voltage: 24 V - 110 V
Power: 3,000 W
Features: Programmable DC/DC Converters to provide voltage or current output Maximum Power Point Tracking algorithm available Optimized for high current Liquid cooling CAN 2.0 bus Parallelisation of several converters ...
TAME-POWER
Input voltage: 40 V - 60 V
Output voltage: 12 V - 48 V
Power: 650 W - 1,000 W
Features and Options Isolated 5V, ¼A Standby Output Hot-Swap Operation 12, 24 or 48VDC Output Remote Output Adjustment Up to 3000 Watts System Output Wide Range 40 to 60VDC Input Integral LED Status Indicators -20ºC to +70ºC Operating I²C ...
Unipower
Input voltage: 12 V - 50 V
Output voltage: 12, 15, 5, 5.2, 3.3 V
Power: 1.5 W
The DVCH Series of DC-DC converters delivers just 1.5 watts in the most efficient, small-size package available today for use in critical-reliability applications. The extra-wide input ...
VPT Inc
Input voltage: 24 V
Output voltage: 12 V
High frequency voltage reducers in order to convert 24VDC direct current, into12VDC. Isolated from earth. A large selection of voltages: 17.0 to 32.0 VDC. Exit voltages: 13.6 VDC +/- 15%. Wide range: between 3 & 24 amps. ...
TECSUP
Output voltage: 48 V - 190 V
+/-190V to 48V DC-DC Down Converter for remote/line powering applications (RFT-V) Utilize existing copper pair networks for distributing power Reduce truck rolls and operating expenses ...
Alpha Technologies GmbH
Input voltage: 9 V - 24 V
Output voltage: 10 kV - 15 kV
Power: 1.5 W - 2.5 W
Spellman High Voltage Electronics
Input voltage: 6 V - 30 V
Output voltage: 5, 3.3, 12, -12 V
Power: 140 W
● Wide input range: 6-30 VDC ● Smart system on/off control ● Six selectable power on/off timing modes ● Load down protection ● Over voltage protection ● Short circuit protection ● Over current protection ● Battery voltage monitor ● ...
IEI INTEGRATION
Output voltage: 24 V - 220 V
Power: 500 W
The PWD 506 has a continuous rated power of 500 W and is available for input voltages and output voltages of 24 - 220 V.
Kaco
Input voltage: 2.3 V - 34 V
Output voltage: 0.7 V - 31.6 V
34V Input Synchronous Step-down DC/DC Controller for Automotive Applications The R1272S is a step-down DC/DC controller which can generate an output voltage of 0.7V ...
... compatibility and voltage quality to environmental conditions, goes without saying. Combination of generator inverter, 28 VDC converter and power management control unit ITAR free
Input voltage: 24, 48, 125 V
Output voltage: 24, 48, 125 V
Power: 150 W - 1,200 W
The power units are composed of redundant DC/DC or AC/DC power packs mounted in standard 19-inch enclosures. Redundancy is provided by diodes at each power supply output. These diodes ...
Input voltage: 12, 24 V
Output voltage: 48 V
Power: 140, 400 W
... Thereby a reliable and highly dynamic motor system is secured from only a 12VDC supply. If the supply voltage is 24VDC the converter PSU48/24-2 can be delivered. It is recommended to mount a capacitor, for instance ...
Input voltage: 72, 96, 12, 24, 48 V
Output voltage: 12, 13.8, 24, 48 V
Power: 250 W - 500 W
Elife DC-DC Converters are characterized by a high-stability over a wide input voltage range. This is achieved through an optimized electronic design, made using the highest performing ...
Input voltage: 4.5 V - 18 V
Output voltage: 9.5 V
Power: 150, 90 W
Provided -40°C … +85°C GF 30% Polyamid 250 mV (avg.) %85 (typ.) 100 kHz (typ.) If input voltage is >8.5 ± 0.3 V, converter is in Bypass Mode. In Bypass Mode, Output voltage = Input Voltage Automotive Start-Stop and Cold Crank
Input voltage: 8 V - 54 V
Output voltage: 5.1, 24.1, 12.1 V
Power: 120, 200 W
DC/DC Converters for 48V 120 W or 200 W continuous H20: 8 – 54 VDC, H21: 15 – 54 VDC, H22: 27 – 54 VDC H20: 5 ± 0.1 V , H21: 12 ± 0.1 V , H22: 24 ± 0.1 V High efficiency non isolated solution 275 kHz (typ.) 300 ...
Input voltage: 7 V - 36 V
Output voltage: 1 V - 25.2 V
... models unless otherwise specified. Features: Long Time Support Product for Industrial Applications.Synchronous single DC/DC converter.Over-Current Protection.Short Circuit Protection.Thermal ...
ROHM Semiconductor
Input voltage: 5.5 V - 60 V
Output voltage: 3, 2, 4 V
The MYCxx series of Ultra-Thin, Fully Integrated Charge pump, Capacitor divider module is based on Murata's proprietary adiabatic or lossless charge pump technology. The module integrates all passive components including inductor in ...
Input voltage: 0 V - 1,200 V
Output voltage: 600, 1,000 V
Power: 30,000, 250,000, 120,000 W
... Compact DC-DC Converter Do you need space in the control cabinet? The SINAMICS DCP (DC Power Converter) product series contains all components of a ...
Input voltage: 85 V - 265 V
Output voltage: 12 V - 24 V
Power: 120 W
The evaluation board is a digital PFC-LLC converter with output. It is controlled by Infineon’s 2nd generation XDP™ SMPS digital multi-mode PFC-LLC combo controller IDP2308. The IDP2308 is specially designed for switch ...
... continuous as AC-converter and up to 400 ADC continuous as a DC/DC-converter. The is a heavy-duty converter specifically developed for electric or hybrid drive trains in mobile work ...
Input voltage: 48 V
Output voltage: 12, 4 V
Power: 72 W
MYC0409 is 48 Volt divide-by-4 Charge pump Capacitor divider fully-integrated module. Capable of delivering up to 72 watts of power with peak efficiency of 97%. MYC0409 devices can be connected in parallel to provide high power, high ...
Input voltage: 304 V - 437 V
Output voltage: 24 V - 1,000 V
Power: 30,000 W - 630,000 W
... -directional control of DC and AC energy. It can optimize the power factor and reduce harmonic in partial grid. On DC side, advanced three-phase staggered current sharing control technology is applied, ...
Input voltage: 2.5 V - 42 V
Output voltage: 0.8 V - 41 V
Power: 0.4, 0.2, 140, 4.1, 143 W
... the converter and maintains a low quiescent current state when the input voltage falls below UVLO. Though DD series products are designed for MHGP’s YCH-L and YCH-H series PPCs, they can also be used as a general purpose ...
Eilersen presents Type 4051A ATEX certified power supply. This has been ATEX certified for hazardous zones 1, 2, 21, and 22. It has been designed for providing supply to Eilersen digital weighing modules 4XXXA interface modules when employed ...
ME30 DC conversion module Usage: - Used in voltage converter of new energy vehicles 1. Single / dual output can be choosed. 2. Input / output protection 3. Temperature protecton
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining