- Power Transmission - Mechanical components >
- Mechanical Transmission >
- Flexible coupling
Flexible couplings
Torque: 2.6 Nm - 6,600 Nm
Rotational speed: 2,500 rpm - 14,000 rpm
• Curved jaw design • Torque ratings from 10Nm to 3300Nm • No need for lubrication • Quick and simple to install • Reliable, rugged and compact • 4 Standard spider types available • Elastomeric element resistant to heat (-40°C+90°C), ...
Torque: 859 Nm - 24,917 Nm
Rotational speed: 3,000 rpm - 6,000 rpm
... for improved torque transmission and longer life • Strong compact design • Low inertia and high maximum speeds • Spacer couplings available on request • Full-Flex and Flex-Rigid design available
Torque: 32 Nm - 1,000 Nm
Rotational speed: 3,600 rpm - 10,000 rpm
• Self-Supporting Drive Shaft, know as Spacer Coupling • Torque Ratings from 32Nm to 1000Nm • Compact, light, robust, safe operation, long life • Two identical hubs and one flexible elastomeric element ...
Rotational speed: 310 rad.min-1 - 14,500 rad.min-1
... gear couplings have been hardened by induction or nitration. Connection parts are used hammering in enclosed metrices and being tempered after the productions. Coupling Types: • Full-Flex Gear Couplings, • ...
Torque: 15 Nm - 10,000 Nm
Metal bellows coupling with simple flange mounting Features For simple flange mounting to special drive components Custom flange patterns available Temperature range -30 °C to +100 °C (-22 °F to +212 °F) Design Two ...
R+W Italia S.r.l
Torque: 15 Nm - 10,000 Nm
Bellows coupling with clamping hub Features Easy to mount Optional: bolt tensioning system in size 800 and up Light weight and low moment of inertia Temperature range -30 °C to +100 °C (-22 °F to +212 °F) Design Two ...
R+W Italia S.r.l
Torque: 2 Nm - 500 Nm
Economy bellows coupling with clamping hub Features Easy to mount Light weight and low moment of inertia Temperatur range -30 °C to +100 °C (-22 °F to +212 °F) Design Two clamping hubs concentrically mounted ...
R+W Italia S.r.l
The original no hub coupling that is made in USA. A high quality low cost alternative where structural reinforcement does not require the use of a heavy duty coupling. In full compliance with ASTM 564, ...
Tridon Clamp Products
... Torque: 80 in-lbs Ultimate Torque: 100 in-lbs Super Heavy Duty Green Shield® No-Hub Couplings Band Length (in): Ideal-Tridon Super Heavy Duty HD No Hub Couplings are listed or certified by all ...
Tridon Clamp Products
... Torque: 80 in-lbs Ultimate Torque: 100 in-lbs Super Heavy Duty Green Shield® No-Hub Couplings Band Length (in): Ideal-Tridon Super Heavy Duty HD No Hub Couplings are listed or certified by all ...
Tridon Clamp Products
Torque: 90 Nm - 160,000 Nm
Grid spring coupling Grid spring couplings are most suitable for fans, blowers, pumps or any other application which requires some degree of torsional resilience. NDE ...
Torque: 1,600 Nm
Flexible disc coupling NDE Clarke Pitchline specialise in flexible disc couplings, ideal for applications including turbines, pumps, compressors and marine propulsion. Series ...
... years of experience in supplying Highly Flexible Coupling solutions and has built up a unique expertise in their design, selection and engineering. This means we can offer all the advantages of highly ...
Torque: 10 Nm - 56,000 Nm
Rotational speed: 1,400 rpm - 19,000 rpm
Metal hubs (cast iron, steel, aluminium alloy) Polyurethane spider In “flexible couplings” range it has got best "transmissible power/dimension" ratio Couplings can be supplied according ...
Torque: 5 Nm - 20 Nm
Elastic coupling "P" Hubs made in brass and spider in rubber. Suitable for low power.
Torque: 0.7 Nm - 3,840 Nm
Rotational speed: 1,500 rpm
Metal hubs (steel, aluminium alloy) Flexible spider in polyurethane special compound Advantages: Backlash free motion drive Vibration dumping Low thermical and electrical conductivity Easy and quick mounting Functional ...
Torque: 1,600 Nm - 40,000 Nm
... lightweight composite membrane couplings and driveshafts. They can be used with tubular steel, or composite carbon or glass fiber shafts. Built for use in passenger ferries, and other marine vessels, CENTADISC-C series ...
CENTA POWER TRANSMISSION
Torque: 0 Nm - 23,500 Nm
Rotational speed: 1,200 rpm - 4,780 rpm
... flexibility together with a limited freedom of axial movement of one connected shaft relative to the other. Flexible Cone Ring couplings are also available with taper bushes type 613 with bore sizes ...
Radicon
Torque: 5.6 Nm - 90 Nm
Rotational speed: 0 rpm - 28,000 rpm
Suco VSE France
Torque: 0.1 Nm - 8,500 Nm
Your customized coupling completes the drive train: Flexible in design Fine-tuning your drive Maximum performance Metal bellows couplings, elastomer couplings ...
Torque: 43,000, 27,000, 9,800 Nm
Flexible couplings transmit torque from one shaft to another and are particularly useful in cases where a limited amount of misalignment of the shaft is unavoidable. Elflex flexible couplings ...
Torque: 15,000 Nm
Rotational speed: 19,000 rpm
Spider couplings, also known as jaw couplings, are torsionally flexible shaft couplings which enable the connection of shafts or flanges via a polyurethane drive ring. Parallel, ...
jbj Techniques Limited
Torque: 62,000 Nm
... compensated. The torsionally flexible shaft coupling from Walther Flender is equipped with flexible coupling packages that (in the case of type A) can be exchanged without ...
Walther Flender
Torque: 6 Nm - 13,000 Nm
The INKOMA – Inkocross-coupling is a machine element for the transmission of torque between shafts. Within the specified range, radial and angular offset can be varied during operation. The INKOMA – Inkocross-coupling ...
INKOMA, ALBERT
Torque: 2.5 Nm - 120 Nm
Rotational speed: 7,000, 4,000, 10,000, 9,000 rpm
Coupling flexible, compact, for reduced mounting nesting couples. ► Flexible element: - Natural rubber block bonded to - V-shaped metal armatures ► Flange: - aluminium ...
PAULSTRA
Torque: 132 ft.lb - 19,810 ft.lb
... worn flexible coupling elements and pounded out keyways. And forget about getting the mounted drive apart for service once the flexible coupling hubs have fretted and ...
Torque: 950 Nm - 26,500 Nm
CMD
Torque: 0.03 Nm - 50.84 Nm
beam couplings Beam Couplings are a class of coupling called Information Transmitting Couplings - These zero backlash, high torsional rigidity couplings ...
W.M. BERG
Torque: 1,920 Nm - 8,000,000 Nm
Rotational speed: 1,730 rpm - 6,000 rpm
Nidec DESCH gear couplings GC are flexible shaft connections suitable for a positive torque transmission. They ensure to compensate radial, axial and angular shaft misalignments. The gear coupling ...
DESCH
Torque: 0.45 Nm - 5.2 Nm
Rotational speed: 70,000 rpm
Reli-a-Flex™ Shaft (Beam) Couplings Reli-a-Flex™ Couplings: The Reli-a-Flex™ range of flexible shaft couplings, also known as a beam coupling, is an ...
Reliance Precision Limited
Torque: 2.1 Nm - 17 Nm
Shaft Collars - Clamp Collars Double-Wide, Double-Split, Steel Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping ...
Torque: 3.51 Nm - 25.8 Nm
Rotational speed: 9,000 rpm - 18,000 rpm
... description:ESSEX coupling are very inexpensive, elastic coupling for simple applications. In a limited area, they compensate shaft offsets and steam peak loads such as oscillations. ...
Torque: 0.7 Nm - 12.5 Nm
Rotational speed: 13,000 rpm - 27,000 rpm
Torques 0,7–12,5 Nm Properties miniature jaw coupling low-cost version with set screws for shaft diameter: 3–14 mm Applications/Specific features shaft-/shaft-connections plug-in, hubs are in aluminium • EWJT: ...
ENEMAC
Torque: 2.5 Nm - 900 Nm
... steel. The BAUMANN Flex couplings are temperature resistant from -40°C to +100°C in the standard version. For special applications couplings for temperatures up to + 300°C are also available. The standard ...
BAUMANN SPRINGS LTD.
Torque: 340, 505 Nm
Rotational speed: 3,000, 3,750 rpm
... range is the result of the partnership linking MECCANICA COUPLINGS srl and GUMMI Italia : - The elastic inserts are supplied by GUMMI; - The mechanical parts are supplied by MECCANICA COUPLINGS ...
Meccanica Couplings srl
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining