... certifications - CE, UL, cUL, FCC, RoHS, China RoHS, Reach Power dissipation - Max. 55mA @ 5VDC Isolation - I/O to Logic: Photocoupler isolation, I/O to Field Power: Non-Isolation Field power - ...
Beijer Electronics
The CDF600-2 Profibus fieldbus module is an easy-to-use unit that integrates identification sensors in PROFIBUS-DP networks ideal for handling and warehousing systems, consumer goods and automotive industries. It comes with a refined ...
SICK
Safety-related distributed relay output module, IP20 degree of protection, for SafetyBridge systems. The module has four safe relay outputs, each with one floating contact.
PHOENIX CONTACT GmbH & Co. KG
... can be used individually or interconnected, with internal bus for power supply and RS 485 – Modbus serial communication -I/O module for data acquisition systems (DAS), PC-based control systems, supervision systems, ...
ASCON TECNOLOGIC
Digital I/O module 6 inputs and 2 outputs -Installation on the machine or within a panel -It can be used individually or interconnected, with internal bus for power supply and RS 485 – Modbus serial communication ...
ASCON TECNOLOGIC
... can be used individually or interconnected, with internal bus for power supply and RS 485 – Modbus serial communication -I/O module for data acquisition systems (DAS), PC-based control systems, supervision systems, ...
ASCON TECNOLOGIC
The NI‑9381 is a single, cost-effective module for general-purpose system I/O. The NI‑9381 combines common I/O circuitry into a single module to help system designers fit more functionality into a single ...
NATIONAL INSTRUMENTS
Advantech's new generation of remote I/O & sensing devices bring an IT oriented spirit to the market. With the advanced concepts of data A-P-P, data Acquisition, data Processing to data Publishing, fulfilling mobile ...
ADVANTECH
... sampling rate with up to 1000 samples a second per channel. This high performance analog input module features high density I/O with a flexible topology and hot-swappable functionality.
ADVANTECH
- Supports Sink (Wet Contact) / Counter input type - Rated Input : >5mA @ 12 VDC - Input Filter : Programmable, Default 3ms - Current : >10mA @ 24 VDC - Pulse Input Frequency : 150Hz - Over Voltage Protection : ...
ADVANTECH
4x SDCI ports (Single-Drop Digital Communication Interface) according to IEC 61131-9 (IO-Link) Enables the connection of up to 4 intelligent SDCI sensors or SDCI actuators All SDCI ports can also be configured ...
SIGMATEK GmbH & Co KG
Decentralized peripherals for every application: Boasting more than 500 I/O modules, programmable controllers and fieldbus couplers, WAGO’s remote I/O system offers all the functions required for your ...
WAGO
Further sensors and system components are needed in order to set up the KNX system and operate it optimally. Presence and motion detectors enable occupancy-related and needs-based control, while a room thermostat and the corresponding ...
Industrial standard e-CON connectors allow direct connection of the unit to sensing devices without use of terminal blocks. This minimizes requirement in installation space and wiring work. • Industrial standard e-CON connectors require ...
... Increase the Value of Your Control Panels. I/O Relay Terminals with 16 Points and Push-In Plus terminal blocks to Downsize Control Panels and Save Labor. • I/O Relay Terminals with 16 points to mount ...
... ensures that the I/O system 1000 satisfies even the highest accuracy requirements. • Easy wiring • 12.5 mm slim I/O modules with 8 connection points
... drive tasks. Topped with the safety I/O module, all the safety aspects in the machine module can be evaluated. EtherCAT is used for data transfer. • Outputs available with output current up to 2 A • Safety I/O ...
... industrial device reliability and robustness for automation applications. Its integrated I/O handles analog and digital signals, allowing DigiRail NXprog be used as an I/O extension of standard automation ...
... tool for reading sensors that monitor the operation of machines, devices or processes. Among its many applications, this multi I/O module makes it possible to count the operating and downtimes of the machine and the quantity ...
Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal ...
Pixsys
The Module SOC-8 is made for controlling the minimal-power output devices through RS-485. With this, it search its function in distributed control and visualization systems. This function can straightly control other DC loads having 24 ...
SIMEX Sp. z o.o.
The Module SIAi-8 is made for enabling the measure analog ranges from 8 current inputs through the RS-485 connection with a speed rate of 10 Hz. Due to one of available capabilities, measurement results can be recalculated. Those capabilities ...
SIMEX Sp. z o.o.
Pulses delivered independently to eight isolated binary inputs are counted by the SLI-8 multi-counter module. It is 24bit long and can be cleared or read by the operator at any time. The LEDs signaling the occurrence of high states on ...
SIMEX Sp. z o.o.
4-Channel Transmitter + 1 Channel Receiver Dupline Module Specifications Mounting method Junction box With approval according to UL No
R-D/A4, R-D/A8, R-D/A16 are modules with 4, 8, 16 optically isolated analog outputs (16bit ±10V) that send reference signals to drives, servocontrols, power solid state relays with linear input, or retransmit variables to recording devices ...
Cube20 is a centralized IP20 I/O station with modular function modules and the ability to connect direct to Cube67 modules. The compact modules have a high signal installation of up to 32 channels in one module. This ...
MURRELEKTRONIK
The PCD1 E-Line I/O modules enable centralised automation in the control cabinet and the decentralised distribution of the components through the bus connection. They can be commissioned quickly using the implemented ...
The programmable I/O modules of the Saia PCD1 E-Line series with Saia PG5® enable the autonomous and safe operation of the modules even if communication to the master station is interrupted. The local function of a room, ...
The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily and are an economical addition to the L-Series. ...
... and the number of outputs from 3 to 11. Each I/O Module has 16 inputs and 8 outputs. Up to 31 I/O Modules can be connected to a single Controller, thus providing a total of 496 inputs and 242 outputs. ...
Module with 20 digital inputs to read consumption using pulses from any type of meter (electricity, water, gas, etc.) or to detect the status (ON/OFF) of any device or sensor associated with a control system (people, units, protection, ...
4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...
Universal inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs. The design of the cards allows their use at any position in the device. If during the use ...
Orbit Merret s.r.o.
Analogue inputs plug-in card for the OMR 700 is fully isolated from the internal bus with a galvanic isolation also between individual inputs. The design of the cards allows their use at any position in the device. If during the use ...
Orbit Merret s.r.o.
Plug-in card for measuring resistance sensors is fully isolated from the internal bus with a galvanic isolation also between individual outputs. The design of the cards allows their use at any position in the device. If during the use ...
Orbit Merret s.r.o.
The I/O module UG 9460 has 8 digital 24V inputs and 4 relay outputs. Via Modbus the inputs can be read and the outputs can be set individually.
The universal Input / Output module UG 9461 has analogue inputs and 2 analogue outputs. It can be used to connect thermocouples and thermistors and offers 2 configurable measuring inputs 0-10V or 0-20mA. Via Modbus the input status can ...
IOB1 – for timing measurement of larger circuit breakers The IOB1 offers six additional input and six additional output channels for CIBANO 500. What does it do? IOB1 is controlled by CIBANO 500 via EtherCAT®-communication. With ...
OMICRON electronics
LLX1 is the ideal solution for testing protection and measurement devices with inputs for voltage and current sensors. A wide range of cables are available for easily connecting LLX1 to different devices that have specific connectors ...
OMICRON electronics
LLX2 Low Level Output Accessory Low Level Interface for External Amplifiers and Accessories LLX2 provides a standard low level interface for controlling external amplifiers such as the CMS 356 and other low level accessories with ...
OMICRON electronics
... protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports an overall of 1024 ...
ODOT Automation
... ~85℃ Operational Humidity： 5%-95% (No Condensation) Protection Class： IP20 Profinet Parameter Protocol： Profinet IO Device I/O Data Size： Input Max.1440 Bytes, Output Max.1440 Bytes RT： YES，Min.1ms IRT： ...
ODOT Automation
The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO modules. Hardware ...
ODOT Automation
KEB’s C6 Remote I/O system offers various options for connecting process signals to an EtherCAT network. It is made up of a C6 Remote I/O bus coupler and additional I/O modules. The C6 ...
Please specify:
Help us improve:
remaining