|
|
Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor
752 40 output W 2900 Rpm loadness, 12/24 Vdc. Drivingshaft supported by self lubrificating bushings. Outlet shaft
supported by two coupled screened bearings. The motor and the reduction gear are both thrated for corrosion strength.
The motor has an electrical suppressor system for the CE standard.
Connecting 2 wire 0,75 x 200 mm.
* The rotation speed can change of ± 10%.
The S1 load test was made using a 1,3 A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 2,6 A corrent in the air with a timing 5' ON 5' OFF with an increase of temperature
of 80° C max
The starting corrent is 7 A and cannot be maintained for more than 2".
Max forces which may act on the outlet shaft: Axial 30 kg, Radial 40 kg on the extremity of outlet shaft
|
|
Top torque density, product variety, extremely wide speed choice, great compactness and price effectiveness make the C series the unparalleled line of helical gearmotors and speed reducers.
|
|
In-Line Gearboxes to 30Nm torque and 120Nm torque ratios. Available with a range of DC Motors and varying ratios.
Including:
G120 In-line gearboxes to 30Nm torque.
IMS In-line gearboxes to 120Nm torque
PM36 Custom permanent magnet motors up to 75 watts.
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts. |
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed, with external ventilation. Thermal safety feature (single - phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With casing in die - cast aluminium. Case - hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long - lasting oil. Sealing rings made in special rubber for high temperatures. 14 gear ratios (i) available, from 6.48 to 372.8. Rated torque 20 Nm. Version B3 or B5. |
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed, with external ventilation. Thermal safety feature (single-phase-model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With casing in die-cast aluminium. Case-hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long-lasting oil. Sealing rings made in special rubber for high temperatures. 15 gear ratios (i) available, from 7.4 to 441.9. Rated torque 5 Nm. Version B3 or B5. |
|
| The PV Series Planetary Gearbox combines Power and Versatility with its wide combination of competitive output faces, high radial load capacities and maintenance free operation. The PV series is available in four metric/NEMA frame sizes and a large offering of ratios. Whether you%u2019re an OEM or an end user searching for competitive alternatives the PV offers a superior solution. Manufactured in the USA, Parker Bayside%u2019s PV series gearbox is universally the only choice. |
|
The helical gearbox from the CMG series is available in 4 different sizes and has the following characteristics:
- Body and the PAM flange are made from aluminium
- The feet and output flange from iron
- The gears are always rectified for stages 1 and 2
- Permanent lubricant
The intensely thought out engineering behind the project allows us to make up the gears quickly by combining specific kits: this reduces the number of components and codes to manage and speeds up assembling and delivery time, which makes management easier and reduces warehouse costs.
The CMG is unique in its type as it is characterised by a higher grade of modularity which makes it ideal for many applications. Starting from the standard base it is possible to configurate the gear according to the applications requirements. |
|
Length "L" of the gearmotor as a funtion of reduction and outlet number of revolution with the standard motor 763 60 output W 3400 Rpm loadness, 24 Vdc. Outlet shaft is supported by two coupled screened bearings.
The motor has an electrical suppressor system for the CE standard.
The motor and the reduction gear are both plated for corrosion strength.
Connecting 2 wire 0,75 x 250 mm.
* The speed rotation can change of ± 10%.
The S1 load test was made using a 1,9 A corrent in the air with an increase of temperature of 70° C.
The S2 load test was made using a 3.6 A corrent in the air with a timing 5` ON 5` OFF with an increase of temperature
of 80° C max. The starting corrent is 14 A and cannot be mantained for more than 2".
Max forces which may act on the outlet shaft: Axial 30 kg, Radial 40 kg on the extremity of outlet shaft.
It is possible to apply an encoder.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing in the first stage (worm) and steel casing in the second stage, which is planetary with three internal planetary gears. Wheel rim in special bronze 120-160 HB hardness. Worm gears in hardened steel with grinding threads rotating on ball and roller bearings. Lubrication with special long-lasting oil.
Sealing rings made in special rubber for high temperatures. 9 gear ratios (i) available, from 33,25 to 475. Rated torque 90 Nm. Version B3 or B5. B5/S left version - B5/D right version. |
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation.
Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: First stage with die-cast aluminium case, second stage in steel. Case-hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long-lasting oil. Sealing rings made in special rubber for high temperatures. 15 gear ratios (i) available, from 37 to 2209.5. Rated torque 23.5 Nm.
Version B3 or B5. |
|
Features & Benefits
- Available in a variety of input styles
- 1/6 through 75HP gearmotors
- Output torque through 155,000 In/Lbs
- Ratios from 1.25:1 to 6300:1
- AGMA Class 10 Cut & Ground Helical Gearing
- Oversized Bearings for Long Life
- Premium Synthetic Lubricant Standard
- Normally Closed Breather - Standard for CbN3000
- Oversized Magnetic Drain Plug
- Corrosion Resistant Cast Iron Housing |
|
DESCRIPTION:
Leading applications: general purpose, medium and fractional power drives.
Design: aluminium die cast housings and covers; two- and three-gear trains. |
|
Combined units of the series MKF + MOT
Mechanical speed variator MKF manufactured by SITI can be combined with series MOT right-angle reduction units, thereby obtaining right-angle axis transmission at an output speed that varies from 1 to 105 rpm with 9900 Nm maximum torque. |
|
| ... products without technical information |
| |
| High quality 3 pole 12mm ferrite motor with a spur gear open gearbox, steel geartrain and sintered bronze bearings. The double shaft unit features an ungeared extended shaft protruding from the motor case. This is suitable for mounting encoders or other drive components for feedback control or actuation. Used by modellers for animating static displays, robotics enthusiasts, and industrial actuators (e.g. locking mechanisms). Originally designed for focusing rings on professional video cameras. |
|
|
|