Microchips

244 companies | 984 industrial products

Companies per page

Taiyo Yuden Europe 1 - 470 nH, 900 mA
Power chip inductor for electronics 1 - 470 nH, 900 mA Taiyo Yuden Europe

Features: -Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides...

Taiyo Yuden Europe 0.047 - 10 µH, 300 - 500 mA
Chip inductor for electronics 0.047 - 10 µH, 300 - 500 mA Taiyo Yuden Europe

Features: -Internal printed coil structure creates a closed magnetic circuit which acts as a magnetic shield...

Taiyo Yuden Europe 0.82 - 4.7 µH, 1.5 A
Power chip inductor for electronics 0.82 - 4.7 µH, 1.5 A Taiyo Yuden Europe

Features: -Low profile below 1.2mm. -Low Rdc. -Multilayer block Structure...

Taiyo Yuden Europe 5 - 2500 Ω, 1.5 A
Ferrite chip inductor for electronics 5 - 2500 Ω, 1.5 A Taiyo Yuden Europe

Features: -Internal silver printed layer creates a closed circuit which acts as a magnetic shield minimizing heat generation and crosstalk. -No need for grounding provides greater circuit design flexibility. -Several...

Taiyo Yuden Europe 68 - 1000 Ω, 200 mA
Ferrite chip inductor for electronics 68 - 1000 Ω, 200 mA Taiyo Yuden Europe

Features: -Available in a wide range of frequency characteristics and impedance values providing excellent suppression...

3 products MAZeT
MAZeT 25 kΩ - 20 MΩ, 25 nA - 20 μA | MTI04CS/CQ
Transimpedance amplifier (TIA) integrated circuit 25 kΩ - 20 MΩ, 25 nA - 20 μA | MTI04CS/CQ MAZeT

4-channel resistive transimpedance amplifier, programmable in 8 levels...

MAZeT MCDC04
Analog / digital converter IC (ADC-IC) MCDC04 MAZeT

4-channel, programmable current/charge converter, Resolution up to 16 bit with dynamic...

MAZeT 0,2 - 102.4 MΩ, 11.7 nA - 12 μA | MDDC04
Transimpedance amplifier (TIA) integrated circuit 0,2 - 102.4 MΩ, 11.7 nA - 12 μA | MDDC04 MAZeT

4-channel resistive transimpedance amplifier, every channel is addressable and programmable...

Werner Electric GmbH max. 10 A, 2 000 V | 70 - 75 series
Integrated circuit mount/socket max. 10 A, 2 000 V | 70 - 75 series Werner Electric GmbH

WERNERS 70-75 series sockets are the widest range of relay sockets. They are designed, manufactured and tested to meet the most demanding worldwide standard industrial requirements, our general purpose...

5 products Melexis
Melexis LIN protocol
Transceiver integrated circuit LIN protocol Melexis

MLX80001 4-channel LIN Master Transceiver The MLX80001 is a 4 channel physical layer device for applications of low speed vehicle serial data network communication using the Local Interconnect Network...

Melexis CAN protocol
Transceiver integrated circuit CAN protocol Melexis

The TH8065 is a System Basis IC (SBC) for LIN slave applications. It consists a low drop voltage regulator 5V/70mA , a LIN BUS Transceiver and a watchdog. The LIN-Transceiver is suitable...

Melexis
FSK/ASK receiver integrated circuit Melexis

The TH71112 FSK/FM/ASK double-conversion superheterodyne receiver IC is designed for applications...

Melexis
RFID transponder integrated circuit Melexis

The MLX90129 combines a precise acquisition chain, internal temperature sensor, interface for external resistive sensors, SPI port and a RFID tag front-end. The MLX90129 combines a precise acquisition...

video Melexis LIN Switch Slave
Transceiver integrated circuit LIN Switch Slave Melexis

LIN Switch Slave This IC is a fully integrated LIN Slave for matrix switch or single switch Applications in automotive...

MAVILI ELEKTRONIK AS MG-1110
Smoke detector integrated circuit MG-1110 MAVILI ELEKTRONIK AS

MG-1110 Mavigard high sensitivity smoke detector Mavigard 1110 High sensitivity smoke detector provides reliable aspirating smoke detection in a small package for easy and discreet installation. *...

LYWENTECH CO., LTD 720 x 500 x 400 mm | LZ-720
High-speed 3-axis CNC vertical machining center for dies and molds 720 x 500 x 400 mm | LZ-720 LYWENTECH CO., LTD

The LZ series mold & die machining centers are designed with unique single casting column and cross rail. Supported by heavy duty linear ways with 45mm width on X, Y, & Z axes...

LYWENTECH CO., LTD 1000 x 600 x 400 mm | LZ-1000
High-speed 3-axis CNC vertical machining center for dies and molds 1000 x 600 x 400 mm | LZ-1000 LYWENTECH CO., LTD

The LZ series mold & die machining centers are designed with unique single casting column and cross rail. Supported by heavy duty linear ways with 45mm width on X, Y, & Z axes...

LYWENTECH CO., LTD 1000 x 500 x 400 mm | LZ-1000-5AZ
High-speed 3-axis CNC vertical machining center for dies and molds 1000 x 500 x 400 mm | LZ-1000-5AZ LYWENTECH CO., LTD

The LZ series mold & die machining centers are designed with unique single casting column and cross rail. Supported by heavy duty linear ways with 45mm width on X, Y, & Z axes...

2 products Kurtz Ersa
Kurtz Ersa
Die casting machine Kurtz Ersa

The best quality at the best price: Low-pressure casting machines for high-volume production The latest addition to the KURTZ family of foundry machines is a new low-pressure casting machine...

Kurtz Ersa
Low-pressure die casting machine Kurtz Ersa

The best quality at the best price: Low-pressure casting machines for high-volume production The latest addition to the KURTZ family of...

3 products RABAUD
RABAUD 17 m³ | AKERA 17E
Integrated binder sprayer and chip spreader 17 m³ | AKERA 17E RABAUD

Tank volume : 17 m³. Binder fed into the tank by two worm screws Ø 460 mm. Rabaud technologie since 25 years. Variable spreading width : 0.62cm to 2.48 m with 15 different...

RABAUD 15 - 17 m³ | ELH series
Integrated binder sprayer and chip spreader 15 - 17 m³ | ELH series RABAUD

Tank volume : 15 and 17 m³ Spreader mounted on your articulated dump. Possibility to mount a thermal auxiliary engine 100 HP to have a autonomous spreading to report the progress of the truck....

RABAUD 10 - 19 m³ | ETS series
Integrated binder sprayer and chip spreader 10 - 19 m³ | ETS series RABAUD

Tank volume : 10, 16, 19 m³. Spreader mounted on single or double axle trailer(s). Also mounted on your carrier (truck, articulated dump ...). 2 pneumatic filler holes. Safety...

SIKOPLAST Anlagenbau GmbH & Co. KG HAW
Die face water ring pelletizer HAW SIKOPLAST Anlagenbau GmbH & Co. KG

The waterring pelletizing systems of the HAW series are easy in operation. The operational area is the pelletizing of PE, PP, PS, ABS and similar thermoplastics. The pelletizing system is completely...

video NGR Next Generation Recyclingmaschinen GmbH 20 – 2000 kg/h | NGR HD
Die face water ring pelletizer 20 – 2000 kg/h | NGR HD NGR Next Generation Recyclingmaschinen GmbH

The NGR water ring, hot die pelletizer is applicable for all types of thermoplastic melts (except for PA 6.6, PET and PPT with MFI > 100). Working principle >> As determined by the system,...

1 products ECON GmbH
video ECON GmbH max. 8 000 kg/h | EUP series
Die face underwater pelletizer max. 8 000 kg/h | EUP series ECON GmbH

ECON offers the leading technology in underwater pelletizing with thermal insulation. With this unique development the ECON system die plate is fixed on heat insulated support body resulting in low energy...

Gala Kunststoff- und Kautschukmaschinen GmbH SLC
Die face underwater pelletizer SLC Gala Kunststoff- und Kautschukmaschinen GmbH

The Spring Loaded Cutter (SLC) is a cost efficient solution for pelletizing basic polymers at lower rates. The SLC pelletizer...

Gala Kunststoff- und Kautschukmaschinen GmbH MAP
Die face underwater pelletizer MAP Gala Kunststoff- und Kautschukmaschinen GmbH

The Manually Adjustable Pelletizer (MAP) features a manual adjusting wheel to position the blades against...

Gala Kunststoff- und Kautschukmaschinen GmbH EAC
Die face underwater pelletizer EAC Gala Kunststoff- und Kautschukmaschinen GmbH

The EAC pelletizer offers fully automated control of blade adjustment, positioning and monitoring, resulting in maximum blade and...

Gala Kunststoff- und Kautschukmaschinen GmbH max. 100 kg/h | LPU™
Laboratory die face underwater pelletizer max. 100 kg/h | LPU™ Gala Kunststoff- und Kautschukmaschinen GmbH

Galas LPU™ Laboratory Pelletizing System is a small lab pelletizing system, specifically designed for laboratory developmental work, market sampling, and light pellet production. This...

Gala Kunststoff- und Kautschukmaschinen GmbH max. 500 kg/h |CLS
Laboratory die face underwater pelletizer max. 500 kg/h |CLS Gala Kunststoff- und Kautschukmaschinen GmbH

Gala’s COMPACT LAB SYSTEM, is used downstream of an extruder or gear pump. Used in laboratory...

Gala Kunststoff- und Kautschukmaschinen GmbH max. 1000 kg/h | EDGE 1000
Die face underwater pelletizer max. 1000 kg/h | EDGE 1000 Gala Kunststoff- und Kautschukmaschinen GmbH

A value engineered pelletizing system designed to economically pelletize and dry thermoplastics—polyethylene,...

1 products Comac spa
Comac spa 60 l, 2.2 kW | CA30 ON.60/100
Single-phase vacuum cleaner for oil and shavings / chips 60 l, 2.2 kW | CA30 ON.60/100 Comac spa

These are single phase suction units with turbine, essential for continuous cleaning operations involving dust, flours, chips of every type and...

2 products SKYWORKS
SKYWORKS
RF power amplifier integrated circuit SKYWORKS

Skyworks Solutions is pleased to offer a broad selection of Power Amplifiers (PAs) and Low Noise Amplifiers (LNAs)...

SKYWORKS
Film chip capacitor SKYWORKS

Skyworks Solutions’ metal-insulator-semiconductor (MIS) chip capacitors are available in a wide range of capacitance values and die sizes for chip-and-wire circuits requiring DC blocking, RF bypassing...

5 products ams AG
ams AG  AS3560, AS3561
Differential audio amplifier integrated circuit AS3560, AS3561 ams AG

The AS3560 and AS3561 are true ground headphone amplifiers using Class G and Class H topologies respectively. These products combine highest quality audio associated...

ams AG AS171x series
Operational amplifier (op-amp) integrated circuit AS171x series ams AG

Ams range of Operational Amplifiers are ideally suited for audio applications. Available...

ams AG AS3977
FSK/ASK receiver integrated circuit AS3977 ams AG

The AS3977 is a low-power fully integrated ETSI, FCC and ARIB compliant FSK transmitter capable of operating at any ISM frequency in the range of 300 to 928 MHz....

ams AG
Application specific integrated circuit (ASIC) ams AG

Capacitive, magnetic and optical sensors and sensor...

PREMA Semiconductor
Application specific integrated circuit (ASIC) PREMA Semiconductor

We will check the feasibility of your ASIC project after receiving...

PREMA Semiconductor max. 80 V | PR2201, PR2202
Operational amplifier (op-amp) integrated circuit max. 80 V | PR2201, PR2202 PREMA Semiconductor

Supply voltage up to 80V Near rail-to-rail-output Input differential voltage up to 60V Low quiescent current Single...

14 products TRIMILL A.S.
TRIMILL A.S. 1100 x 1000 x 700 mm | VC 1110
3-axis CNC vertical machining center for dies and molds 1100 x 1000 x 700 mm | VC 1110 TRIMILL A.S.

Crane hook machine for short term availability for production side walls produced...

TRIMILL A.S. 2300 x 1400 x 800 mm | VC 2314
3-axis CNC vertical machining center for dies and molds 2300 x 1400 x 800 mm | VC 2314 TRIMILL A.S.

Quick machine tool establishment and putting into operation - the machine...

TRIMILL A.S. max. 3000 x 1600 x 1000 mm | VC 3016
3-axis CNC vertical machining center for dies and molds max. 3000 x 1600 x 1000 mm | VC 3016 TRIMILL A.S.

Customized distance between spindle nose and clamping surface stationary frame components...

TRIMILL A.S. max. 6500 x 2500 x 1250 mm | VC 4525
3-axis CNC vertical machining center for dies and molds max. 6500 x 2500 x 1250 mm | VC 4525 TRIMILL A.S.

Very flexible X-axis adjustment → 3.500, 4.500, 5.500 or 6.500 mm customized...

TRIMILL A.S. 900 x 600 x 500 mm | GTV 97
3-axis CNC vertical machining center for dies and molds 900 x 600 x 500 mm | GTV 97 TRIMILL A.S.

Crane hook machine for short term availability for production unique monobloc...

TRIMILL A.S. 1200 x 800 x 700 mm | AV 128
Bridge type 3-axis CNC vertical machining center for dies and molds 1200 x 800 x 700 mm | AV 128 TRIMILL A.S.

Crane hook machine for short term availability for production execution as...

Foundry automation
Low-pressure die casting machine Foundry automation

Established some 35 years ago, Foundry Automation specializes in the design and manufacture of: Fully automated iron green sand molding machines and plants Core shooters (hot box cold box shell) for...

RABOURDIN INDUSTRIE
Die set for press RABOURDIN INDUSTRIE

TYPE AL REF. 7843 REF. 7801-7802 STANDARD DIE SET: REAR PILLARS AL TYPE DGL/DDL REF. 7823-7833 REF. 7801-7802 STANDARD DIE SET: DIAGONAL PILLARS DGL/DDL TYPE...

1 2 3 4 5 6 7 8 9 10
Filter by :
Extend the search
Search by manufacturer
Search by catalog
Associated Terms

industrial microchips

With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.