Laboratory automation equipment

... Vitrified frozen structures are extremely sensitive to environmental influences and need to be protected from the formation of artefacts. Prepare your samples for detailed image evaluation under optimal conditions: • - Cold shield around the sample avoids ...

... With Leica EM VCT500 you can transfer samples under cryogenic conditions or at room temperature as well as under vacuum or protected atmosphere. Leica EM VCT500 Stay Connected • - Connect your workflow systems • - Optimize your sample transfer thanks ...

Ensure the ultrastructures of your tissue samples can be precisely compared every time by preparing them with the EM TP tissue processor. With the EM TP you can be confident that tissue differences between samples observed with your light microscope (LM) ...

Flow: 7 l/min
Pressure: 130 mbar
Power: 19 W

... Adjustable speed control Outstandingly easy to use Small footprint to optimize workspace Maintenance-free Very compact, chemically resistant and oil-free diaphragm vacuum pump with manual speed control for adjusting the pump capacity to your specific ...

Flow: 0 m³/h - 0.0024 m³/h
Pressure: 0 bar - 6 bar
Head: 0 m - 4.5 m

... Product overview
KNF diaphragm liquid pumps combine compact dimensions with chemical resistance to handle a wide range of liquids, neutral or corrosive. The pumps operate dry, are self-priming, require no routine maintenance and can be supplied ...

Flow: 0 m³/h - 0.144 m³/h
Pressure: 0 bar - 0 bar

... Overview
KNF diaphragm gas pumps transfer or compress gases and vapors and generate a vacuum without contaminating the media. Models are available with multiple size and motor variants, digital control options and selectable materials to meet ...

Flow: 0 l/min - 22 l/min
Head: 0 m - 7 m
Power: 200 W

... Acid pump - B2 Vario PP The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important ...

... Wobble plate pump Our latest generation of wobble plate pumps utilise a tried and tested principle. A spherical housing accommodates a wobble ring that sits at an angle on a shaft. The rotation of the shaft causes the ring to perform a characteristic ...

Flow: 0 l/min - 22 l/min
Head: 0 m - 8 m
Power: 260 W

The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. The set is ...

Flow: 0 l/min - 197 l/min
Pressure: 8.3 bar
Weight: 9.4 kg - 19.9 kg

ARO EXP 1” metallic diaphragm pumps achieve flow rates of up to 52.2 GPM (197.6 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Industrial, Chemical ...

Flow: 0 l/min - 651 l/min
Pressure: 8.3 bar

... ARO EXP 2” metallic diaphragm pumps achieve flow rates of up to 172 GPM (651 l/min) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Paint, Oil & Gas, ...

Flow: 0 l/min - 49.2 l/min
Pressure: 0 bar - 6.8 bar
Weight: 4, 3.3, 4.3, 4.6 kg

... Part of our Compact Series of pumps, our 1/2” classic pumps feature big performance in a small package. With flow rates up to 13 GPM (49.2 LPM) and a wide range of material and porting configurations. Features ARO has the world's best selling ...

The MSX432 is designed for sectioning large samples of high-alloy and hardened materials. Short contact times per stroke coupled with intense cooling provide the cold-cutting effects required for microstructural examination (17-inch blade capacity; 20.1 ...

The LECO MSX305 Series sectioning machine are floor models and designed for sectioning large samples of many different types of materials using automated oscillation and servo-pulse sectioning. It is ideal for samples like induction-hardened parts, through-hardened ...

CX300 Series is an intuitive line of metallographic sectioning machines designed to elevate laboratory efficiency and precision. This innovative saw series combines cutting-edge technology with user-centric design, offering a compact yet powerful solution ...

... Elevate your laboratory workflow with the epMotion® 96 Flex, combining advanced technology with user-friendly design for unparalleled performance. Process 96- and 384-well plates with ease and enjoy flexibility with an exchangeable dispensing head design ...

... Increase your productivity and pipet whole 96-well plates at once. Just make it faster and more precise. The epMotion 96 overcomes the limits of manual multichannel pipetting. Save time and money while getting better reproducibility of your results from ...

Our smallest member of the epMotion family is the most compact solution for accurate and reproducible automated pipetting. This makes the epMotion 5070 a perfect match for any routine application such as PCR and qPCR set up, serial dilutions, reagent ...

The 869 Compact Sample Changer offers the rapid and simple automation of Titrino plus applications in a very small space. For low numbers of multiple determinations or small sample series, this sample changer is just the right choice. Various titrations ...

The 885 Compact Oven Sample Changer is used for thermal sample preparation in Karl Fischer titration. In the oven the samples can be heated up to 250°C. The moisture contained in the sample evaporates and is transported by a dry carrier gas into the titration ...

... The 860 KF Thermoprep is designed for thermal sample preparation in Karl Fischer titration. Numerous substances cannot be analysed by direct Karl Fischer titration as they are not soluble, react with the Karl Fischer reagent or release their water ...

... Frees you from routine pipetting and provides excellent results The use of electronic pipettes helps to increase throughput in today’s laboratories. However, prolonged manual pipetting takes up precious time, and can lead to repetitive strain injuries. ...

... Pipette design and good pipetting practice have always been in the focus to improve ergonomics and reproducibility of pipetting. For the design of the ASSIST, INTEGRA kept these critical factors in mind but went even a step further: by automating our ...

... Toss the insert and keep the base, saves you money and saves you space! Reagent reservoirs are used by many laboratories for the temporary storage of reagent during pipetting applications. However many reservoirs have flimsy troughs, graduations that ...

Pressure: 5 psi
Power: 2 W - 2.5 W
Length: 54 mm

This miniature (16 mm), solenoid-driven fixed volume dispense pump is available in 50 µL standard models, with other dispense volumes available upon request. Featuring a compact, chemically inert, self-priming design, this pump aspirates an accurate volume ...

Pressure: 95, 60 psi
Input diameter: 0.3 in
Width: 42.9 mm

LPD Series variable volume dispense pumps are a new generation of stepper motor driven, positive displacement pumps designed to provide unparalleled reliability a nd performance at an economical price. The LPD Series are available in standard dispense ...

Power: 7 W
Fluid temperature: -1 °C - 49 °C
Length: 87 mm

This compact (25 mm), solenoid-driven fixed volume dispense pump is available in 100 µL and 175 µL standard models, with other dispense volumes available upon request. Featuring a compact, chemically inert, self-priming design, this pump aspirates an ...

Flow: 12 l/min - 60 l/min
Head: 8.5 m

The small battery drum pump COMBIFLUX FP 314 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. With IP 44, it is protected against splash water and therefore also ideally suited ...

Flow: 17 l/min - 47 l/min
Head: 6.8 m

The small drum pump JUNIORFLUX F 310 with fixed commutator motor and mechanical seal is especially suitable for pumping comparatively small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows ...

Flow: 27 l/min - 57 l/min
Head: 8.5 m

The small sealless drum pump JUNIORFLUX F 314 with fixed commutator motor is especially suitable for pumping comparatively small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping ...

SEM and STEM / TEM users know the problem: High-resolution imaging is often impaired (if not made completely impossible) by the rapid build-up of a carbon film in the observation area. This is usually caused by gaseous hydrocarbons that are continuously ...

IM4000 II is a modular computer-controlled argon ion polishing system that can be equipped as a pure surface polisher, as a cross-section polisher or as a hybrid system, depending on the desired functionality. With a beam energy selectable in 100eV steps ...

... The IM series systems are indispensable for SEM sample preparation. They are ideal for when high-quality, millimetre-scale cross-sections or surfaces are needed and conventional mechanical preparation methods don’t give satisfactory results. ArBlade ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

... PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, SCADA, Modbus 4.33” color ...

Flow: 7.9 l/h - 126 l/h
Pressure: 6.9, 7.6, 2.1, 3.4, 4.5 bar
Power: 0.18 kW

... PERISTALTIC METERING PUMP (KM3) - ALBIN PUMP Specifications: Flow rate: up to 126 l/h (33 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, SCADA, Modbus 4.33” ...

Flow: 108 l/h - 600 l/h
Pressure: 6.9, 3.4, 2.1, 4.5 bar
Power: 0.3 kW

... PERISTALTIC METERING PUMP (KM4) - ALBIN PUMP Specifications: Flow rate: up to 600 l/h (158.5 gph) Discharge pressure: up to 6.9 bar (100 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, SCADA, Modbus 4.33” ...