Industrial presses

60 kN Cordless Electro-hydraulic Compression Tool to Crimp Tubular and Al/Cu Lugs and Butt Connectors ESDC60 electro-hydraulic compression tool ✔ Output force: 60 kN ✔ Stroke: 17 mm ✔ Autonomy: 180 to 450 crimping operations with ...

Pneumatic compression tool for crimping ✔ Crimping of loose connections (insulated, end sleeves, disconnects with closed or open barrel, etc.). ✔ Other crimping or applications: cutting of materials, punching… consult us. ✔ Stroke: ...

ESC120 electro-hydraulic compression tool ✔ Output force: 120 kN ✔ Stroke: 25 mm ✔ Autonomy: 110 to 220 crimping operations with battery 4.0 Ah ✔ Cycle time: 5 to 8 s depending on the section ✔ Dimensions: 385 x 315 x 72 mm ✔ ...

Opening: 0 mm - 35 mm

... Tn pneumatic press for Aluminum profiles Pneumatic press ideally produced to perform punching on aluminium profiles and focused on windows and doors openings on the profile for the hardware to assemble ...

Force: 32.4 kN
Opening: 20 mm - 80 mm

... pneumatic punching machine for aluminum profiles Pneumatic press ideally produced to perform punching on aluminium profiles and focused on windows and doors openings on the profile for the hardware ...

Force: 78.5 kN

P-8000 G 8 Tn pneumatic press for aluminum profiles punching works Pneumatic press ideally produced to perform punching on aluminium profiles and focused on windows and doors openings on the profile ...

Force: 50 tf
Stroke: 500 mm
Table width: 800 mm

Press technologies: electrical axis with high efficiency, speed, accuracy and dynamic movement Compact and easy integration into automatic cell Multilingual dialog and programming interface on a 12’’ touch screen ...

... insertion and circlip fitting press. – A loader for supplying bearings. – A bearing positioning device above the hub. Lowering of the press – Position check by digital rule. – Pressure check by sensor. – ...

STRAIGHTENING AND FORMING PRESS C-FRAME OR ARCH PRESSES Are adapted for custom work or mass production to use in aircraft, energy, agribusiness, automotive, heavy industry … Designed for a large ...

Force: 490 N
Opening: 155 mm
Stroke: 90, 28 mm

... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column. mechanical presses with manual control, equipped with a 25 - 36 ...

Force: 1,470.9 N
Opening: 450 mm
Stroke: 63, 100, 160 mm

... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column. mechanical presses with manual control, equipped with a 25 - 36 ...

Force: 3.9 kN
Opening: 580 mm
Stroke: 70 mm

... all models are equipped with a mechanical stop. Working height of manual and pneumatic models is adjusted by moving the machine body on the column. mechanical presses with manual control, equipped with a 25 - 36 ...

Force: 320, 600, 800, 1,000 kN
Opening: 450, 500, 550 mm

Reducton of Mold Wear All movements can be controlled. In this way, the stroke is completed as soon as possible and without permitting the deformaton of the mold. Integrated software that combines hydraulic and mechanical servopress ...

Force: 200, 100, 150 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...

Force: 100, 30, 60 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...

Force: 2,192.1, 2,989.2, 1,494.6 kN
Opening: 450 mm

... comes as standard. Pressure lower than 320 bar. Glycerin gauge with reading in tonnes. The control panel features a switch enabling the user to select the desired type of work in a manual or semi-automatic position. ...

Force: 797.1, 996.4, 1,494.6, 1,992.8 kN
Opening: 250 mm

... of two center pins located beneath the bed. The raising and lowering system is operated by means of chains activated by the press cylinder. It inlcudes two support flat blocks. Two different models are available: SD ...

Force: 797.1, 2,192.1, 2,989.2, 996.4, 1,494.6 kN
Opening: 250, 300 mm

... Glycerin gauge with reading in tonnes. The control panel features a switch enabling the user to select the desired type of work in a manual or semi-automatic position and a switch to select either ...

Force: 3,150 kN

... multi-purpose press for drawing, punching and embossing. The frame is made of steel and is welded into one piece (WP = Welded Plate). This model offers many options such as cushion, third cylinder, light curtain and/or ...

Force: 10,000 kN

ODEN-Flexible, a hydraulic press available in many different configurations allowing for a wide ODEN-F is a flexible hydraulic four-column press that is available in many different configurations. This ...

Force: 50,000 kN

The ODEN-FT hydraulic press is for press operations with higher tonnage and larger press beds. It is excellently suited to press hardening, drawing, embossing, punching, ...

Used to extract water by equalising moisture over the entire width of the fabric / . Used to impregnate fabrics with chemicals and achieve optimum squeezing Speed Compensator Dancing roller group at the outlet, made up of two rollers ...

... homogeneous squeezing/impregnation over the entire width of the fabric by means of the floating roller. Electrical panel on the machine Possibility of installing the flexo roller in all Bianco padder at two-rollers. Control ...

Compact system for high squeezing and impregnation. Central Roller Driven by gearmotor. 3 Rollers Diameter 290 mm, lined with synthetic rubber with flat and parallel grinding, 85-95 shore hardness, pressure 67 Kg/cml. Special ...

Force: 16 tf
Opening: 200 mm
Max. pressure: 0 bar - 250 bar

Press for the vulcanization of silicone rubber moulds of 300 mm in diameter with manual hydraulic pump. This machine is equipped with a timer for the programming of the vulcanizing cycle. Moreover, ...

Force: 25 tf
Opening: 200 mm
Max. pressure: 0 bar - 250 bar

Press for the vulcanization of silicone rubber moulds with maximum diameter of 400 mm, automatic hydraulic pump and pressure stabilizer. This machine is equipped with a timer for the programming of ...

Force: 50 tf
Opening: 240 mm
Max. pressure: 0 bar - 250 bar

Press for the vulcanization of silicone rubber moulds of 300 mm in diameter with manual hydraulic pump. This machine is equipped with a timer for the programming of the vulcanizing cycle. Moreover, ...

Force: 150, 200 tf
Opening: 13, 10 in
Stroke: 13 in

... jobs. Other features of the 150-200T H-Frame Press include: • May be used horizontally for special pressing applications with user-supplied supports. • Work head has wide horizontal travel; rugged press ...

Force: 80, 100, 150, 200 tf
Stroke: 13 in

The original, patented Roll-Bed® design where the bed rolls out for easy loading and unloading with a crane or other lifting device, supporting loads up to 3,000 lbs (1361 kg). The Roll-Bed Presses are available in 4 different capacities. ...

Force: 25 tf
Stroke: 6 in
Weight: 240 lb

The Power Team C-Frame Press is available with a 25T capacity. The Open throat design makes loading and unloading work easy. Other features of the C-Frame Press include: • Can be bench mounted or on ...

Five-mug digital heat press This iKonix digital mug heat press prints on up to five items at a time. Suitable on a wide range of items, this heat press transfers on promotional products ...

... tackle stubborn wrinkles while reducing ironing time by up to 50 percent. With its advanced design and build, a PSP steam press will leave a professional dry-clean finish on all types of garments.

Weight: 4 kg
Overall length: 436 mm

... wire 5 mm Special features: • efficient Li-ion battery • automatic retraction when pressure is achieved • automatic off switch ending cycle after proper crimping is complete

Weight: 3 kg
Overall length: 402 mm

... Special features: • efficient Li-Ion battery • automatic retraction when maximum pressure is achieved • automatic off switch ending operation cycle after a proper crimping is complete • electronic record of operation ...

Weight: 4 kg

... Special features: • efficient Li-Ion battery • automatic retraction when maximum pressure is achieved • automatic off switch ending operation cycle after a proper crimping is complete • electronic record of operation ...

Force: 100 kN
Rate (strokes/min): 190 p/min
Stroke: 8 mm - 52 mm

... cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized automatic lubrication with adjustable flow Control board complete with ...

Force: 200 kN
Rate (strokes/min): 155 p/min
Stroke: 8 mm - 60 mm

... cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized automatic lubrication with adjustable flow Control board complete with ...

Force: 400 kN
Rate (strokes/min): 140 p/min
Stroke: 5 mm - 76 mm

... cluch brake unit Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized automatic lubrication with adjustable flow Control board complete with ...

Force: 100 tf - 3,500 tf

... information to be taken into account when configuring the press, in order to be able to use the dies in the best possible way. Based on the requested energy, the type of lever mechanism, the press dimensions ...

... information to be taken into account when configuring the press, in order to be able to use the dies in the best possible way. Based on the requested energy, the type of lever mechanism, the press dimensions ...

... information to be taken into account when configuring the press, in order to be able to use the dies in the best possible way. Based on the requested energy, the type of lever mechanism, the press dimensions ...

Max. pressure: 6 bar
Weight: 80 kg
Overall width: 350 mm

The SP 4 sealing press allows sealing of almost any conceivable 2-dimensional shape. This is made possible by special sealing tools, which are individually manufactured for your application. The pneumatic cylinder ...

Force: 4,200 N
Stroke: 100 mm
Max. pressure: 6 bar

The SP 4 sealing press allows sealing of almost any conceivable 2-dimensional shape. This is made possible by special sealing tools, which are individually manufactured for your application. The pneumatic cylinder ...

Opening: 95 mm
Max. pressure: 6 bar

Sealing seam length:2,500 mm Sealing seam width: 6 mm, heated on both sides Bar aperture 100 mm Film aperture: 2,500 mm Sealing output max. 2 x 0.4 mm PE film Pulse time: continuously digitally adjustable Cooling time: continuously digitally ...

Force: 300, 600, 1,000 kN
Opening: 200, 300, 400 mm
Stroke: 200 mm - 400 mm

... /600/1000 are especially designed for demanding applications and automated use. •2 column press frame: extraordinarily high parallelism and easy access to press area •extremely accurate temperature ...

Force: 300 kN
Opening: 0 mm - 150 mm

•The LabManual 300 is a manually operated press especially designed for basic pressing operations and moderate use. •2 column press frame: extraordinarily high parallelism and easy access to press ...

Force: 50 kN - 5,000 kN
Opening: 100 mm - 1,000 mm
Stroke: 100 mm - 1,000 mm

... 30-40 mbar), floating upper platen for lower press range (1-10 kN), higher temperatures up to 700°C, cassette cooling system,… •2 column press frame: extraordinarily high parallelism and easy access ...

For the production of large batches. This machine has three handling stations through which up to 24 press units can be moved stepwise by means of a round table. Station 1: For removal of the finished ...

... station rotary type press is specially designed to produce over 800 pads per hour at the rate of five second press cycle. The press demonstrates high performance short cycle press, ...

Two independently operating production units serving a common press station. Output at a 5-second press-cycle results in more than 500 pads per hour. Automatic short-cycle press, for ...