Selector valves

DN: 0.063 in - 0.118 in
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 232 °C

Parker's B Series ball valves, with a "free floating " ball design, offer superior performance in a variety of pressure and temperature applications in process, and instrumentation applications. Parker's B Series Ball ...

DN: 0.125 in
Pressure: 0.2 bar - 10 bar
Temperature: 0 °C - 80 °C

» Channelling of two signals coming alternately from two different points towards the same point The circuit selector Mod. SCS - 668-06 enables two signals coming alternately from two different points to be channelled ...

DN: 0.125, 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 80 °C

Circuit selector valves select two separate input signal without creating reciprocal interference, giving a single output signal. EAN code: 8024986016581 Quantity per package: 10 Minimum order quantity: ...

DN: 1.78 mm
Pressure: 0 psi - 500 psi

Beswick’s miniature mixing/diverting ball valve is an excellent choice for applications requiring a port selection valve. The MBVMD allows bi-directional flow between a common inlet port on the bottom ...

DN: 1.78 mm
Pressure: 500 psi

Beswick MBVT-1414 is a miniature ¼-28 threaded selector ball valve this is manufactured using stainless steel materials. It is an excellent choice for application requiring a port selection valve. ...

DN: 1.6 mm - 3.2 mm
Pressure: 100 psi

The Beswick selector valve can be used as a quiet replacement for solenoid valves in many applications, and has the ability to operate from a servo motor. The SVPC series rotary selector ...

DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min

Circuit selector valve, manual operation maximum pressure

DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min

Constant openning valve, 3 way, made in steel for working with high pressure.

DN: 0.125 in - 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 60 °C

The selective valve is mainly used to guide or control two different inputs which either chooses one or another but uses only a single a way out.

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve ...

DN: 2, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h

This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve ...

DN: 1.5, 2, 2.5, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h

This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve ...

DN: 0.125 in - 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C

The valve is used to section a pneumatic installation. Sliding the sleeve on the rod. both ON and OFF positions can be achieved. When the sleeve is against the rod hexagon. the flcw goes in the arrcw direction (ON), pushing ...

DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...