PicoSTP is a simple, user-friendly and flexible stepper motor driver suitable for medium and low power, applications.
PicoSTP is the right choice for all applications where the small dimensions and best cost/performances ratio are important. ...
The STP-170 module is suitable for high-performance and low-cost bipolar motor stepper driving. This driver can operate from 12 to 42Vdc with a nominal current of 1.7A A wide series of accessories ...
The STP250 module is suitable for high-performance and low-cost bipolar motor stepper driving. This driver can operate from 12 to 42Vdc ith a nominal current of 2.5A.
A wide series of accessories ...
* 3.0 Amp unipolar drive
* Bi-directional ramping between speeds
* ...
Features
• Single 8V - 35V input supply voltage range
• 0.0 to 1.5A adj phase current (ships ...
Features
• Integral controller - driver - power supply
• Output current of 4 amps @ 40Vdc
• Short circuit/over temp. ...
Modules Stepper
If you are looking for the flexibility of designing in our motion ICs but lack ...
TMCM-612/SG
Description
6-axis controller/driver 1.1A/24V + data aquisition
The TMCM-612/SG is a six axis 2-phase stepper motor controller and driver module with a high performance data acquisition part. The integrated 8 channel 16 bit ADC converter can be programmed to do a step-synchronous input voltage scan and store values at a high ...
PANdrive PD-140-42-SE
Description
42mm stepper motor with integrated controller/driver and sensOstepTM encoder
The PD-140-42-SE PANdrive is a full mechatronic solution including a 42mm flange high torque motor, a motion controller/driver and a integrated sensOstep™ encoder. The PD-140-42-SE can be controlled via RS232, RS485, CAN or USB interface. ...
The SW with c0300 and c0400 firmware is a series of Full Digital drives configurable by means of PC software interfaces and easy to install in CANBus fieldbus networks (CANopen protocol) or in RS232/RS422 serial systems (Modbus protocol). Additionally to ...
The SW with c0390, c1390, c0490 and c1490 firmware is a series of Full Digital drives programmable by means of IDE eePLC (Integrated Development Environment) and can also function in 'standalone' mode' allowing a maximal application customization. The series with c1390 and c1490 firmware integrates also ...
The SDL drive series are Full Digital high performance micro-step devices based on the precise pwm control technology to regulate the sinusoidal current. Thanks to this solution the SDL drives are able to control stepper ...
The DS Series is a compact driver for New Pentagon (Bipolar) stepping motors, 0.36° or 0.72° per step. DS Series driver contains ...
The AlphaStep with Built-in Controller offers closed loop control and high response moves with no hunting or gain tuning and features low vibration at low speeds. Using Oriental Motor's closed loop control, the AlphaStep with Built-in Controller ...
The RK Series incorporates new functions and state-of-the-art technologies to achieve the ultimate performance of a stepping motor. The series ...
The smart microstepping drives of the DS30 series are the right choice for all those applications which need an accurate motor control both in speed and position.
The built-in indexer is fully programmable by the user through easy and intuitive functional ...
High reliability and performance, compact size and low cost have been the guidelines followed to develop the drivers of DSxxx series suitable for DIN rail mounting.
Using the last electronic components generation and the SMT technology ...
The OS10xx series offers an excellent price-performance ratio.
Realized in open design they have a IP00 protection grade.
The drivers are mountable through 4 holes placed ...
The smallest stepper motor driver on the market. Only 1.25"x1.25" (32mm x 32mm).
Up to 750mA and 24V.
Product Description
The BSD-01C module is a complete Full step driver with ...
Microstepping Driver - 1/8-step resolution.
up to 750mA /phase (version dependent), 30VDC
dimensions: (2.00" x 2.50" x 0.55")
(51mm x 64mm x 14mm)
Product ...
Microstepping Driver - 1/16-step resolution.
2.5A /phase, 30VDC
dimensions: (2.75" x 2.70" x 0.88")
(70mm x 69mm x 22mm)
Product Description
Microstepping driver with 1/16-step ...
The ST stepper drives are a family of compact digital stepper drives with multiple control options and many sophisticated features. The ST drives represent the latest generation of stepper drive technology from Applied Motion. Step motors run smoother than ever with features such as anti-resonance, ...
The STAC6 series stepper drives are powerful, two-phase, bipolar step motor drives for high-speed, high-torque applications. With high bus voltage and high current output, STAC6 drives provide even the largest step motors with enough power to get the job done.
STAC6 stepper drives employ sophisticated ...
The STAC5 series stepper drives are powerful, two-phase, bipolar step motor drives for high-speed, high-torque applications. With high bus voltage and high current output, STAC5 drives provide even the largest step motors with enough power to get the job done.
STAC5 ...
The 17 DRV 001 QuickInstall stepper-motor drive is one of a series of precision actuators which are easy to install and remove without tools. A captive retaining ring and a precision mounting surface ...
BSC - USB Stepper-Motor Controllers
* Optically isolated input/output
* Dynamic step-resolution control
* Includes software with ActiveX® programmable interface
* Bipolar synchronous control
This ...
MST - Two-Channel Stepper-Motor Control Module for USB Modular Rack Controller System
* Dual 50 W 2-Phase Bi-Polar Stepper Drive Outputs
* Encoder Feedback for Closed Loop Positioning
* High Resolution Microstepping Control
* Includes software ...
KS9110
Specifications
Driving type：Chopper mode ...
Specifications
Driving type : Micro-step driving type
Power supply : ...
Specifications
Driving type : Micro-step driving type
Power supply ...
This motor controller is excellent choice for those users ...
The STPMDRV-807 is a high performance, cost effective stepper ...
This motion control system is stand-alone, easy-to-use, plug-and-play and cost effective solution for motion control applications.
Each system includes the ...
The SPiiPlus SDMnt (network Stepper Drive Module) line of four and eight axis open loop step motor drives modules are designed to address the ...
Economical 2, 4 axes step motor motion controller. Especially designed for enhancing the performance of OEM systems operating with step motors, and servo motor drives with Pulse-Direction interface.
Highlights:
Meets the requirements of the most demanding applications without compromising accuracy or throughput
Supports a wide range of motion modes, including ...
