Input voltage: 198 V - 242 V
Output voltage: -5 V - 8 V
Current: 120 A
... Overview
The DXNT series Superconducting Magnet Power Supply by Dexinmag is an all-digital, high-stability bipolar current source engineered for superconducting magnets. It combines a switching pre-regulation stage with a linear regulation ...
Input voltage: -72 V - 2,000 V
Output voltage: -1,000,000 V - 1,000,000 V
This power supply is a highly stable bipolar constant current power supply, which is widely used in the excitation of inductive loads such as electromagnets and Helmholtz coils. The power supply adopts a linear power supply structure, with high output ...
Input voltage: 200 V - 240 V
Output voltage: 32 V
Current: 10 A
DX-3500D three-channel precision DC power supply is a three-channel high-precision bipolar DC power supply. It is mainly used to provide high-precision bidirectional current excitation for geomagnetic compensation coils, coil magnetic field generators ...
Input voltage: 100 V - 240 V
Output voltage: 28 V
PPS is the preamplifier power supply and signal separator. When you choose the data acquisition board that can not supply power to the preamplifier and also there is no power adaptor can be connected to the preamplifier, it is necessary to connect PPS ...
... Built-in LCD display shows recharging status. If the temperature is over the limit when recharging, the charge station will activate the protection function to stop recharging. Charge station can identify whether battery is supplied by KILEWS. When ...
Input voltage: 230 V
Output voltage: 48 V
... Low voltage uninterruptible power supply. Monitoring - 4 switched power lines - batteries - from the main power supply 4 configurable trigger inputs ...
Input voltage: 9 V - 264 V
Output voltage: 24 V
Current: 230, 125 mA
... This supply unit is allowed for the operation of 24 VDC sensors, such as vent- and flowcaptors, with AC supply voltage. The supply unit contains a 24 VDC transformer rectifier and a switching circuit with output relay with potential free single pole ...
Input voltage: 120 V - 227 V
Output frequency: 50, 60 Hz
PS350XA5 power pack is the heart of the low voltage sensor system. It transforms 120, 240 or 277 volts to power the remote sensors.
Input voltage: 380 V - 480 V
Output voltage: 48 V
Power: 1,500 W - 3,200 W
... Description
Industrial power supply designed for use with SOMANET and ACTILINK equipment. Provides 48 V DC output with 1500 W continuous and 3200 W peak capacity. Integrated braking chopper handles regenerative energy. DIN-rail mounting for ...
Input voltage: 342 V - 528 V
Output voltage: 48 V
Power: 960 W - 2,000 W
... Short description
Industrial power supply for motion applications. 960 W continuous / 2000 W peak, input 3-phase AC 342–528 V, output 48 V DC. Integrated braking chopper, IP54, chassis-mount for cabinet-free installations.
Overview
The ...
... Overview
Accessories for industrial radio remote controls, including monitor testers, anemometers (WIND DIN 2), wireless battery chargers (standard and compact), protective pouches and antennas (UHF, FLAT 870 and WHIP). Original REMdevice accessories ...
The BSB BC5 series overload protector can be used in power systems with a rated current of 3A to 50A, a frequency of 50/60Hz, and a voltage of AC 250V and DC 65V to protect against overload and short circuits. They are primarily used in industrial automation ...
The Cauliflower Segmenter 211F is designed for efficient fleuretting, processing cauliflower heads with diameters between 120 and 250 mm. It delivers the core in one piece, discharged separately, eliminating the need for manual presorting. The machine ...
Input voltage: 220 V
Output voltage: 24 V
Current: 5.2 A
... PSU-20 can reliably supply current in the area installed at plenty of flame detectors during rectification (at DC24V). • Reliably supply spare current • Supply current up to 20 flame detectors ...
Input voltage: 190 V - 264 V
Output voltage: 12 V
Current: 1.25 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc supply voltage, such as PLC electromagnetic locks, electric strikes and all electronic ...
ZELEC
Input voltage: 196 V - 264 V
Output voltage: 12 V
Current: 2.5 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc supply voltage, such as PLC electromagnetic locks, electric strikes and all electronic ...
ZELEC
Input voltage: 196 V - 264 V
Output voltage: 12 V
Current: 5 A
... Power supplies convert 230 V alternative current into 12 V direct current. The range of modular power supplies can be used to power any product requiring a 12 Vdc supply voltage, such as PLC electromagnetic locks, electric strikes and all electronic ...
ZELEC
Input voltage: 85 V - 370 V
Output voltage: 5 V
Current: 5 A
... Power supply, 5A, 5VDC, 85 to 264VAC Universal, DIN mount, Switching power supply FEATURES • Universal AC Input (85 to 264VAC) • DC Compatible Input (120 to 370VDC) • Protections: Short Circuit, Overload, Over Voltage, Over Temperature • Mounts ...
Dataforth Corporation
Input voltage: 105, 125 V
Output voltage: 5 V
Current: 1 A
The SCMXPRT-001/-001D and SCMXPRE-001/-001D encapsulated power supplies are available in 120VAC or 220VAC input voltage ranges and provide 5VDC outputs suitable for all SCM5B modules. They are designed to mount on the SCMXRK-002 metal rack or DIN-rail ...
Dataforth Corporation
Input voltage: 85 V - 264 V
Output voltage: 24 V
Current: 5 A
... Power Supply, DIN Rail Mount, 85-264 VAC 47-63 Hz In, 24 VDC 5.0 A Out Dataforth’s PWR-PS5RxW series sets new standards for switching power supply technology. Combining rugged, compact enclosures, incorporating all international standards and approvals, ...
Dataforth Corporation
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 5 A
... - External power supply for LCD monitors up to 19" TFT - Black housing - Input: 100 - 240 V AC IEC320 C14 3-PIN TYPE cold device socket - Output: Jack plug 5.5*2.5*9.5mm, cable length 1.8 m - 12 V, 5 A (approx. 45 W min.) - Load capacity: 15 kg - Standards, ...
Input voltage: 100 V - 240 V
Output voltage: 24 V
Power supply in card format (1 slot) for the audio matrix of the COMPACT and OPTIMAX2 systems. 100-240V AC input, 24V DC output.
Input voltage: 230 V
Output voltage: 24 V
Current: 0 A - 30 A
Manager for permanent emergency power supply according to EN 54-4 in case of power failure. The 19” unit (2u) is equipped with 6 fused outputs that can be used with up to 30 A load. The smart battery condition monitoring ensures an uninterrupted 24 V ...
Input voltage: 12 V
Output voltage: 24 V
... Power supply with two 12 V DC & 5 Ah batteries for the uninterrupted supply of 24 V DC to the sets of mechanisms that are installed in accessible bathrooms and changing rooms (KB-10F), as specified in the Spanisch Technical Building Code (CTE- DB SUA ...
Input voltage: 100 V - 240 V
Output voltage: 12 V
Current: 1.5 A
... Power supply with AC-DC plug-in type converter in switching technology. - Protection: overload, temperature - Cable length: 1m - Dimensions: 59.3x30.7x75.6mm - Weight: 128g - HS code: 85044050 ...
M.A.E. S.r.l.
Input voltage: 115, 230 V
Output voltage: 15 V
Current: 1,600 mA
... AC-DC power supply plug-in type converter in switching technology, 15V, 1600 mA, 24 watt Depth: 75 mm Height: 74 mm Widt: 43 mm Status: ErP livello 2 Connector: Spina 5,5/2,1 Tipology: SYS 1308-2415-W2E Maximum inout tension: 264 ...
M.A.E. S.r.l.
Input voltage: 115 V - 230 V
Output voltage: 5 V
Current: 1,500 mA
... Charger 1 USB 1500 mA european plug 1 pins interchangeableplugs for universal use Switching power supply plug type Double coating Compact structure Protection againist shortcuit and overload EU CoC V5 tier 2 / EnergyStar DOE VI Supplied accessories 4 ...
M.A.E. S.r.l.
... The EMU-2it has been designed in modular housing, 1U (17,5mm wide) for DIN rail. It supports all current sensors (CT secondary at 1A or 5A, 0…333mV, , ±1 o 10Vpk, 100mA CA/CC, Rogowski coils, HALL sensors). The built-in digital output allows connecting ...
... Medium voltage power factor correction and filter equipment • Economic advantages of generators, transformers, linesschal and switching equipment • Lower loss and establishment of additional reserves, to transmit more active power • Lower voltage drop • ...
... The Wolf ATEX Splitter Box is compact, portable and CE marked to the ATEX Directive for safe use in Zones 1 and 2 potentially explosive gas and Zones 21 and 22 dust* atmospheres, making it ideal for power distribution within hazardous area confined spaces. The ...
Input voltage: 230 V
Output voltage: 24 V - 200 V
Power: 125 W - 1,500 W
... These equipment are DC power supply for electromagnetic chucks. They are used to magnetize an demagnetize the chucks. In addition, while demagnetizing the chuck, they carry out a process that removes the residual magnetism on the contact surface, and ...
... Discover our new accessory T-SPLITER M12.8 For automatic series connection of safety switch Getting Auto series safety switch Easy installation / wiring / installation speed 1. Easy installation 2. Simplified wiring 3. Quick installation ...
... filter reactor ： Filter reactor together with capacitors can combine harmonic circuit to reduce the harmonic current in the system , mainly 3rd , 5th , 7th , 11th , 13th and higher . Filter reactor can be installed by parallel or serial connection . Function ...
... filter reactor ： Filter reactor together with capacitors can combine harmonic circuit to reduce the harmonic current in the system , mainly 3rd , 5th , 7th , 11th , 13th and higher . Filter reactor can be installed by parallel or serial connection . ...
Voltage: 24 V
Capacity (Amp-hour): 6 A
... Regulator LEO regulator for electromagnetic powder brakes LEO is a microprocessor controlled digital current regulator that can be programmed by using the three buttons on the front of the board. It can be used with the closed loop regulation and a ...
Input voltage: 115, 230 V
Output voltage: 0 V - 1,250 V
Current: 0.2 A
The PS-2 and PS-2/LV are Sutter PMT power supplies sold with the Sutter MOM®. They are also available to those who need dual power supplies for either their own scanning microscope or other projects that need PMT power supplies. The PS-2 is a dual high ...
... ELECTRONIC POLARITY TESTER TYPE TPE InnovativeEffective . Dimensions: 143x22x19 mm . Weight 31 gr . 2 LED's : Green=South and Red = North . Sensitivity: +/- 15 mT included with purchase - Battery: 4x1,5 V Use :metrologyControl magnetic field ...