... Battery holder for CR2 and CR123A lithium batteries.
Through-hole pin and lead wire types are available.
Specifications
- Material : ABS (UL94V-0)
- Operating temperature : -10°C ~ +60°C
- 4 models available
- Available
TAKACHI Electronics Enclosure Co., Ltd.
... Coin cell holder for 9 different coin cell types.
Surface mount type with compact body.
Heat resistant glass fiber filled LCP for lead free reflow soldering.
Tape reel packages (-TR models) are available for bulk purchase.
SMTU1220-G, SMTU1632-G ...
TAKACHI Electronics Enclosure Co., Ltd.
... Coin cell holder with through-hole pins.
Heat resistant glass fiber filled LCP for lead-free reflow soldering.
8 different coin cell types are available - Compatible batteries
LR44/SR44, CR1220, CR1632, CR2016×2pcs, CR2032, CR2430, CR2450, ...
TAKACHI Electronics Enclosure Co., Ltd.
... Switched-mode power supplies for top-hat rail mounting Version: Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto ...
Input voltage: 100 V - 240 V
Output voltage: 24, 48 V
Current: 20, 10 A
... 480W Single Output Industrial DIN RAIL Universal AC input / Full range Built-in active PFC function Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 ...
Lantech Communications Europe GmbH
Input voltage: 100 V - 240 V
Output voltage: 48, 24 V
Current: 5, 10 A
... 240W Single Output Industrial DIN RAIL Universal AC input / Full range Built-in active PFC function Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 ...
Lantech Communications Europe GmbH
Input voltage: 100 V - 240 V
Output voltage: 48, 24, 12 V
Current: 5, 10, 2.5 A
... 120W Single Output Industrial DIN RAIL Universal AC input / Full range Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control ...
Lantech Communications Europe GmbH
The PASF-60.24 is a two phase power supply unit with an integrated output-relay fit for the demanding solutions. It offers maximum functionality for applications in complex systems and machines. The power supply steps down the voltage from 230V AC to ...
Input voltage: 100 V - 370 V
Output voltage: 24 V
... akYtec PASB-15/30/60.24 industrial power supplies are designed to provide stable DC voltage to a wide range of radio-electronic devices, such as relay-automation systems, controllers, etc. Maximum output power: 15 W, 30 W, and 60 W. Each power-supply ...
... DESCRIPTION The power hub combines reliable power supply, seamless fieldbus communication and wireless remote control in one powerful package. The power hub is a central component of the EFCm and EFC system, responsible for both power supply and communication. ...
Output voltage: 180 V - 528 V
Power: 15,000 W - 900,000 W
Motor movement and regenerative processes take place in electric machines in order to ensure defined machine cycles. The generated energy is often burned up by braking resistors. KEB’s power supply and regeneration systems offer energy-optimised solutions ...
Input voltage: 0 V - 50 V
Output voltage: 15, 24 V
... HAMPTON, VA. March 1, 2020 - Teledyne Hastings Instruments, a worldwide leader of vacuum instrumentation and thermal mass flow meters and mass flow controllers, announces the release of the THCD-401 four channel power supply, controller, and display ...
... ・Compact distributor housing for TH35 top hat rail systems ・suitable for splicing installation cables ・faster installation through splicing preprepared pigtails ・equipped with LC-D adapter and LD pigtails ・pigtails with semi-tight buffered fiber dia ...
METZ CONNECT
... ・distribution housings for copper and fibre optic applications ・2 separately lockable areas to separate the installer and user sides ・protection class: IP54 ・versatile due to modular design ・good access possibilities and simple installation ・the ...
METZ CONNECT
... ・surface-mounted housing for splicing fibre optic installation cables ・equipped with a patch panel with 12xLC-D OM4 (violet) couplings ・equipped with pigtails prepared for splicing ・pigtails with semi-tight buffered fiber ø 0.9 mm, secondary and primary ...
METZ CONNECT
Input voltage: 230 V
Output voltage: 48 V
... Low voltage uninterruptible power supply. Monitoring - 4 switched power lines - batteries - from the main power supply 4 configurable trigger inputs ...
... Product summary
Dual distributor with two M12x1 outlets, 5-pin A-coded connector, 1:1 wiring. Compatible with CAN bus protocols (CANopen, CAN SAE J1939).
Features
- Dual distributor (two M12x1 outlets)
- 5-pin, A-coded
- Wiring:
Input voltage: 100 V - 240 V
Output voltage: 24 V
Power: 3 W
... The FTR power supply is a switching mode power supply to be connected directly to the line proviiding na isolated output. It is suitable for powering instruments such as 4-20 mA field transmitters. The FTR power supply is designed for DIN rail mounting, ...
Input voltage: 90 V - 370 V
Output voltage: 24 V
Current: 3, 13, 5, 10 A
... The NOVUS NDR Power Supplies have full range voltage input, high efficiency, DIN rail support and operation temperature up to 50 ºC. Attending international standards and certifications they are a robust solution to provide 24 Vdc for any industrial application. - ...
Input voltage: 100 V - 370 V
Output voltage: 24 V
Current: 2, 3.13, 5, 10, 20 A
... The NOVUS EDA Power Supplies have full range voltage input, high efficiency, DIN rail support and operation temperature up to 70 ºC. Attending international standards and certifications they are a robust solution to provide 24 Vdc for any industrial application. - ...
Input voltage: 120 V - 227 V
Output frequency: 50, 60 Hz
PS350XA5 power pack is the heart of the low voltage sensor system. It transforms 120, 240 or 277 volts to power the remote sensors.
Input voltage: 115 V - 230 V
Output voltage: 24 V
Current: 1 A
DES Series Power Supplies are specially designed for the full range of Magtrol’s Eddy-current and Powder brake dynamometers with the design goal providing the best response time. The DES Series supplies are packaged in an industrial housing made of cast ...
Input voltage: 240, 120 V
Output voltage: 24 V
Current: 0 mA - 1,000 mA
The 5212 is a 0-1A current-regulated 24 VDC power supply and display that is designed for use with Magtrol’s hysteresis brakes and clutches. It features a 10-turn current adjustment potentiometer and 3 selectable current ranges: 200 mA, 500 mA, and 1000 ...
Input voltage: 120, 240 V
Output voltage: 0 V - 90 V
Current: 0 mA - 1,500 mA
The Model 5200 is a basic unregulated power supply that is designed for use with Magtrol’s Hysteresis Brakes and Clutches. The 5200 is available in either 12, 24 or 90 VDC voltages, corresponding to the available hysteresis brake/clutch coil voltage options. ...
Input voltage: 380 V - 480 V
Output voltage: 48 V
Power: 1,500 W - 3,200 W
... Description
Industrial power supply designed for use with SOMANET and ACTILINK equipment. Provides 48 V DC output with 1500 W continuous and 3200 W peak capacity. Integrated braking chopper handles regenerative energy. DIN-rail mounting for ...
Input voltage: 342 V - 528 V
Output voltage: 48 V
Power: 960 W - 2,000 W
... Short description
Industrial power supply for motion applications. 960 W continuous / 2000 W peak, input 3-phase AC 342–528 V, output 48 V DC. Integrated braking chopper, IP54, chassis-mount for cabinet-free installations.
Overview
The ...
Input voltage: 100 V - 240 V
Output voltage: 24 V
Output frequency: 60, 50 Hz
... Power supply: – 100… 240 Vac (50/60 Hz) Connectable to: – Deltadue Series – Sigmadue Series – OPMT operator panels – 24 Vdc controllers and thermostats ...
The Cauliflower Segmenter 211F is designed for efficient fleuretting, processing cauliflower heads with diameters between 120 and 250 mm. It delivers the core in one piece, discharged separately, eliminating the need for manual presorting. The machine ...
The DTS 2340.IRIG Distributor is a signal distributor for modulated (AF) and unmodulated (digital) IRIG-B signals. The distributor consists of two identical lines which operate independently of each other.
The DTS 2345.Serial Distributor is a signal distributor for serial interfaces (RS 232 and RS 422). The distributor consists of two identical lines which operate independently of each other.
The DTS 2390.DCF Distributor is a distributor for DCF 77 signals (unmodulated). The current loop input is distributed to five current loop outputs. The device is a redundant system containing two identical systems.
Input voltage: 220 V
Output voltage: 24 V
Current: 5.2 A
... PSU-20 can reliably supply current in the area installed at plenty of flame detectors during rectification (at DC24V). • Reliably supply spare current • Supply current up to 20 flame detectors ...
Input voltage: 85 V - 370 V
Output voltage: 5 V
Current: 5 A
... Power supply, 5A, 5VDC, 85 to 264VAC Universal, DIN mount, Switching power supply FEATURES • Universal AC Input (85 to 264VAC) • DC Compatible Input (120 to 370VDC) • Protections: Short Circuit, Overload, Over Voltage, Over Temperature • Mounts ...
Dataforth Corporation
Input voltage: 105, 125 V
Output voltage: 5 V
Current: 1 A
The SCMXPRT-001/-001D and SCMXPRE-001/-001D encapsulated power supplies are available in 120VAC or 220VAC input voltage ranges and provide 5VDC outputs suitable for all SCM5B modules. They are designed to mount on the SCMXRK-002 metal rack or DIN-rail ...
Dataforth Corporation
Input voltage: 85 V - 264 V
Output voltage: 24 V
Current: 5 A
... Power Supply, DIN Rail Mount, 85-264 VAC 47-63 Hz In, 24 VDC 5.0 A Out Dataforth’s PWR-PS5RxW series sets new standards for switching power supply technology. Combining rugged, compact enclosures, incorporating all international standards and approvals, ...
Dataforth Corporation
Input voltage: 115 V - 230 V
Output voltage: 24 V
Current: 40 mA
... Description: - Current loop power supply Power supply: - 115 / 230 Vac ± 10% 50 / 60 Hz Consumption: - 1,5 VA Stabilized output: - 24 Vdc 40 mA Operating temperature: - - 10 / + 60 °C Dimensions (w x h x d): - 35 x 95 x 72 mm Weight: - Approx ...
SENECA | AUTOMATION INTERFACES
Input voltage: 24 V - 230 V
Output voltage: 24 V
Current: 50 mA
... Description: - Current loop dual power supply Power supply: - 115 / 230 Vac (s100s-1-ST); 24 V (s100s-3-ST) Consumption: - 3,5 VA Output: - 2-CH stabilized output with galvanic isolation 24 Vdc, 50 mA Operating temperature: - - 10 / + 60 °C Dimensions ...
SENECA | AUTOMATION INTERFACES
Input voltage: 115 V - 230 V
Output voltage: -15 V - 15 V
Current: 350, 75 mA
... Description: - Dual stabilized power supply Power supply: - 115 / 230 Vac ± 10%, 50-60 Hz Consumption: - 7,5 VA Output: - + 15 Vdc 350 mA; - 15 Vdc 75 mA Operating temperature: - - 10 / + 60 °C Dimensions (w x h x d): - 70 x 95 x 105 mm Weight: ...
SENECA | AUTOMATION INTERFACES
Input voltage: 230, 115 V
Output voltage: 18 V - 23 V
Current: 4 mA - 20 mA
... • Multiple power supply electronically up to four two-wire transmitters • Isolation of each circuit with each other protected against short circuits • Plastic housing for mounting on a 35 mm DIN-rail according to EN 50022 Serves for feeding of two-wire ...
... The EMU-2it has been designed in modular housing, 1U (17,5mm wide) for DIN rail. It supports all current sensors (CT secondary at 1A or 5A, 0…333mV, , ±1 o 10Vpk, 100mA CA/CC, Rogowski coils, HALL sensors). The built-in digital output allows connecting ...
... The Wolf ATEX Splitter Box is compact, portable and CE marked to the ATEX Directive for safe use in Zones 1 and 2 potentially explosive gas and Zones 21 and 22 dust* atmospheres, making it ideal for power distribution within hazardous area confined spaces. The ...
Input voltage: 90 V - 264 V
Output voltage: 12 V
Several universal AC adapters / chargers for Mark-10 force gauge and torque gauges are available, each of which consists of a body and replaceable prong. Spare prongs are also available.