- Hydraulics - Pneumatics >
- Valve >
- 2-way solenoid valve
2-way solenoid valves
DN: 7 in - 64 in
Voltage: 12 V - 24 V
Temperature: -320 °F
... B-Cryo Series Solenoid Valves are 2- way miniature cryogenic solenoid valves designed and built for service down to -320°F (-196°C) in applications needing ...
GEMS SENSORS & CONTROLS
DN: 0.25, 0.35, 0.5, 0.125 in
Pressure: 0.5 mbar - 1,500 mbar
DN: 0.5, 1 in
Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 1,500 mbar
... of the in-depth knowledge of our technicians. This series of solenoid valves is patented. The DDN solenoid valves are direct drive, two- way, two-position valves ...
Voltage: 24, 110, 220 V
... MAGNUM 3G is completed with a range of tools and accessories to help the installer Main features: Upper part (PVC-U) Bottom part (PVC-U) Bolts (zinc plated steel) Nuts (zinc plated steel ) Gasket (NBR) Reinforcing ring ...
FIP - Formatura Iniezione Polimeri
DN: 6, 8, 4 mm
Voltage: 12 V
Temperature: 0 °C - 50 °C
... The solenoid valve is the ideal solution for applications requiring many rapid actuation cycles and installations in confined spaces. Thanks to the absence of metal parts in contact with the fluid or the external environment, ...
FIP - Formatura Iniezione Polimeri
DN: 4, 8, 6 mm
Voltage: 24 V
Temperature: 0 °C - 50 °C
... 2 way solenoid valve with ASTM female union ends for solvent welding. The solenoid valve is the ideal solution for applications requiring many rapid actuation cycles ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 25 mm
Voltage: 12 V - 220 V
Temperature: -10 °C - 140 °C
... compact brass body, gives to them the possibility to be used in very small places. They’re available in different versions as 2/ 2, 3/ 2 NC and NO and with NBR, Viton or EPDM seals. ...
DN: 10 mm - 25 mm
Voltage: 12 V - 220 V
Temperature: -10 °C - 140 °C
... compact brass body, gives to them the possibility to be used in very small places. They’re available in different versions as 2/ 2, 3/ 2 NC and NO and with NBR, Viton or EPDM seals. ...
DN: 1.3, 1.8 mm
Voltage: 12, 24 V
Temperature: 0 °C - 55 °C
... Specifications *********** Valve Type: 2- Way or 3- Way, Normally-Closed or Normally-Open, Fully-Ported (3- Way) Medium: Compatible Fluids (40 micron filter recommended) Air ...
Clippard
DN: 0.6, 1, 1.5 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 65 °C
... ultra-low leak applications Specs: ------- Valve Type: 2- way bi-directional or 3- way normally-closed & universally ported Ports: Inlet and outlet through manifold + 3- Way: ...
Clippard
DN: 0.23 mm - 1.8 mm
Voltage: 20, 10 V
Temperature: 32 °F - 120 °F
... Clippard's next-generation DV Series valve is now available in a 2- Way proportional control version! The new DVP Series provides a high degree of control and customization. Available in manifold mount ...
Clippard
DN: 10 mm
Voltage: 12, 230, 120, 24 V
Temperature: -20 °C - 100 °C
... Direct-operated solenoid valve - 202 The GEMÜ 202 directly controlled 2/ 2- way solenoid valve has a completely plastic encapsulated ...
DN: 7 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 60 °C
... The GEMÜ 8500 servo assisted 3/ 2 or 5/ 2- way pilot solenoid valve is indirectly controlled. The body is made of aluminium. The plastic encapsulated coil ...
DN: 2 mm
Voltage: 12 V - 230 V
Temperature: -20 °C - 100 °C
... Direct-operated solenoid valve - 52 The GEMÜ 52 Directly controlled 2/ 2- way solenoid valve has a completely plastic encapsulated coil. ...
DN: 0.125 in
Voltage: 230, 24, 115, 48 V
Temperature: -10 °C - 130 °C
... Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm 2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.25, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C
... Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm 2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.125, 0.25 in
Voltage: 115, 230, 24 V
Temperature: -10 °C - 130 °C
... Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm 2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.05 mm - 2 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C
... and liquid Connection M5, sub-base mount, barbed Pressure [Bar] -1 to 12 Flow factor kv [l/min] 0.01 to 1.0 O 2 clean option yes Material in contact with media - Base DIN 1.4305, 1.4105, Brass Material in contact ...
GEVASOL
DN: 4.6 mm
Voltage: 5 V - 24 V
Temperature: 5 °C - 50 °C
... Pitch size [mm] 16.5 Media Non-corrosive gas Connection Cartridge, sub-base mount Flow factor kv [l/min] 3.3 O 2 clean option Yes Type of acting Pressure compensated Material in contact with media - Base DIN 1.4305, ...
GEVASOL
DN: 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar
... Instrumentation Medical Industrial Pitch size [mm] 32 Flow factor kv [l/min] 0.5 to 6.5 O 2 clean option yes ...
GEVASOL
DN: 0.75 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C
... Series TORK dust collector valve, pulse solenoid valves are normally closed position. (shaker valves, diaphragm valves are another names of pulse valves) ...
SMS-TORK
DN: 0.75 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C
... PL1020 REMOTE CONTROL PULSE SOLENOID VALVE, NORMALLY CLOSED Application : Compressed Air , dust collector services Size : 3/4"..3" Working Pressure : 0,5…8 Bar (3/4”…1 1/ 2”); 3…8 Bar ( 2”…3”) Coil, ...
SMS-TORK
DN: 20 in - 40 in
Voltage: 12 V - 230 V
Temperature: -40 °C - 120 °C
... Position : Normally closed Coil Voltage : 230V, 110V , 48V, 24V , 12V AC ; 110V , 48V , 24V , 12 V DC Protection Class: Atex ...
SMS-TORK
DN: 1.5 in - 56 in
Voltage: 12, 24, 110, 220 V
Temperature: -15 °C - 80 °C
... Model BTE / BFE, a Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. We manufacture both Solenoid ...
DN: 1.5 in - 14 in
Voltage: 110, 220 V
Temperature: -15 °C - 80 °C
... A Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. Providing precise pressure control in Fire Protection ...
DN: 1.5 in - 12 in
Voltage: 220, 110 V
Pressure: 0 bar - 144.2 bar
... Model DTE / DFE , A solenoid control valve with diaphragm design, is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. Features ◆ ...
DN: 2.5, 1.2, 4, 2 mm
Voltage: 12 V - 380 V
Temperature: -5 °C - 150 °C
... The UD Series 2/ 2 general use small valve is designed for versatile applications across various industries. It offers reliable performance and durability, making it an ideal choice for systems requiring ...
Ningbo Phen Automation Co., Ltd
DN: 0.375 in - 2 in
Voltage: 12 V - 220 V
Temperature: -15 °C - 150 °C
... General Use Valve which is Suitable for Air,Water, Light Oil, Gas Valve body material Brass & SUS304 ...
Ningbo Phen Automation Co., Ltd
DN: 0.5 in - 2 in
Voltage: 12 V - 220 V
Temperature: -20 °C - 185 °C
Piston Seal Design, Good At High Temperature Application
Ningbo Phen Automation Co., Ltd
Voltage: 12 V
Temperature: -10 °C - 100 °C
... Product Overview
The Weilong WL0521 car headlamp
solenoid
valve is a compact electromagnetic actuator designed for projector-type automotive headlamps. It enables fast, precise switching between high beam and ...
Weilong Intelligent Technology (Dongguan) Co., Ltd.
DN: 15 mm
Voltage: 4.5, 6, 12, 24 V
Temperature: -10 °C - 100 °C
... Product Overview
The WL1854 urinal
solenoid
valve by Weilong Technology is a compact, fast-response
solenoid
valve designed for sensor-controlled, touch-free flushing systems ...
Weilong Intelligent Technology (Dongguan) Co., Ltd.
DN: 0.5, 0.75 in
Voltage: 2.4 V - 30 V
Temperature: 1 °C - 75 °C
... WL0102 watering solenoid valve is an electrically actuated valve designed to automate water distribution in irrigation systems. It is compatible with timers and controllers and operates on low voltage ...
Weilong Intelligent Technology (Dongguan) Co., Ltd.
DN: 1, 1.5, 2, 3, 3.5 mm
Voltage: 24 V
Temperature: -196 °C - 50 °C
... flow, resistant to low temperature, and flexible mounting. Working Principle KLPV-HP proportional solenoid valve is a direct acting proportional valve, where the extent of the internal movement of magnet ...
KaoLu
DN: 14 mm
Voltage: 24 V
Temperature: -10 °C - 50 °C
... Product Details
This
solenoid
valve series is specially designed for high-pressure applications and can withstand working pressures up to 40 bar, meeting the demands of modern technologies that require precise ...
KaoLu
DN: 2 mm
Voltage: 6 V
Temperature: 0 °C - 80 °C
... Small、Low power consumption、Widely use Body material - Brass、Stainless Steel Seal material - NBR ...
KaoLu
DN: 12 mm - 50 mm
Voltage: 12 V - 230 V
Temperature: -27 °C - 80 °C
... Series 2/529 - Solenoid valve for hydrogen H 2 and high pressure applications 2/ 2- way servo-operated piston valve ...
ALPHA AUTOMATISMES Sarl
DN: 8 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C
... 071 - Solenoid valve for hydrogen and very high pressure applications 2/ 2- way solenoid valve with servo-controlled ...
ALPHA AUTOMATISMES Sarl
DN: 1 mm - 8 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C
... Series 8/100 - High-pressure solenoid valve for hydrogen, pneumatically operated 2/ 2- way valve, with piston, direct pressure operated - ATEX NC ...
ALPHA AUTOMATISMES Sarl
Pressure: 210 bar
... Consists of cartridge valve, block and solenoid coil. ...
DN: 15 mm - 50 mm
Voltage: 230, 24 V
Temperature: 50 °C
... Pilot operation Function of the valve • In the resting position, the fluid pressure is formed through a servodrive in the upper part of the membrane ( 2), the valve is closed. • During the connection, ...
DIVATEC,SL
DN: 10 mm - 20 mm
Voltage: 230, 24 V
Temperature: 50 °C
... upper part of the membrane ( 2), the valve is closed. • During the connection, the pilot valve is first opened, that is, the magnet frame and the attached pilot membrane (5) goes up and releases a discharge ...
DIVATEC,SL
DN: 2 mm - 8 mm
Voltage: 230, 24 V
Temperature: 0 °C - 50 °C
... Direct action with PTFE • PVC, PTFE materials • FKM special seals, EPDM seat Function • Closed without current (NC) • Directly controlled ...
DIVATEC,SL
DN: 2 mm
Voltage: 24 V
Temperature: -10 °C - 95 °C
... Perfect for the integration of a second lubricant circuit, this 2/ 2- way valve can engage the circuit (pressure-free), while the OS-BP pump is in non-operating state. Model versions: ...
DN: 1.6 mm
Temperature: -20 °C - 90 °C
Pressure: 0 bar - 20 bar
... Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR Power input: DC 5 W / AC 6.5 VA ...
DN: 6 mm
Voltage: 24, 230 V
Temperature: -10 °C - 90 °C
... Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR LED - no Clock rate - 2000 cycles/min. AC [VA] - 10.0 DC [W] - 6.0 ...
DN: 0.125 in - 2 in
Temperature: -10 °C - 140 °C
Pressure: 0.1 bar - 20 bar
... connector in line with ISO 4400 Protection class IP65 When using a connector Materials Brass housing (CW617N) Valve seat made of brass (CW617N) Interior components made of stainless steel Sealing material made of NBR ...
DN: 15 mm - 98 mm
Voltage: 230, 24, 110, 12 V
Temperature: -30 °C - 180 °C
... Port Refer below technical data sheet (Available BSP / NPT) Body Material SS ASTM A351 Grade CF8 / CF8M Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable ...
UFLOW AUTOMATION
DN: 0.375 in - 4 in
Voltage: 230, 12, 110, 24 V
Temperature: -30 °C - 180 °C
... Port Refer below technical data sheet (Available BSP / NPT)End ConnectionScrewed / FlangeBody MaterialSS ASTM A351 Grade CF8 / CF8MMedia Temp & seal o ring Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior corrosion resistance ...
UFLOW AUTOMATION
DN: 15 mm - 100 mm
Voltage: 110, 230, 12, 24 V
Temperature: -30 °C - 180 °C
... Port: - Refer below technical data sheet (Available BSP / NPT) Body Material: - SS ASTM A351 Grade CF8 / CF8M > Main Features: - Internai Parts are in superior corrosion résistance Steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, ...
UFLOW AUTOMATION
... standard, the Explosion-proof solenoid valve series can be installed directly on the air source interface of single acting or double acting pneumatic actuators. Due to its unique pneumatic structure, the Explosion-proof ...
Temperature: 180 °C
Pressure: 30 bar
... temperature-controlled M&C three- way valves V3/ 2-H, MV 2/ 2 H and MV3/ 2 H are used for shutting off or switching over sample gases and test gases up to ...
Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 2 bar - 8 bar
Expressly developed for high-density sorting and recycling applications, the compact 820 ISD Series offers outstanding characteristics in terms of response time and life expectancy. The integrated 24 VDC miniaturized speed-up driver with standard M8 connection ...
MATRIX mechatronics
Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 5 bar
... The 580 Series solenoid multi- valves are 2/ 2 NC type. The research about materials and new technological solutions allowed the realization of a shutter solenoid multi- valve ...
MATRIX mechatronics
Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 8 bar
... The 840 Series Pneumatic Solenoid Valves is of the 2/ 2 NC Type. Its innovative and advanced design gives the realization of a shutter valve with a very smooth operation ...
MATRIX mechatronics
DN: 0.125, 0.25 in
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 40 bar
... Component Parts and Materials 1 Body: Brass 2 Seals: NBR - EPDM - FKM 3 Welded armature tube: Stainless steel 4 Fixed and mobile core: Stainless steel 5 Springs: Stainless steel Operator diameter 10 mm ...
AIGNEP
DN: 8 mm - 150 mm
Voltage: 12, 24, 110, 120, 230 V
Temperature: -15 °C - 60 °C
... VMR VMR60 Safety solenoid valves for air and gas, fast opening and fast closing type The VMR type valve is a fast opening solenoid valve that is normally closed. When ...
Elettromeccanica Delta S.p.A.
DN: 3 mm
Temperature: -10 °C - 13 °C
Pressure: 0 bar - 16 bar
... The direct-acting solenoid valve made of plastic The combination of high-performance plastic with particularly corrosion-resistant magnetic steels makes the EAV 800 perfect for demanding applications in food & beverage ...
AVS Römer
the best suppliers
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group