... come in different model types, such as tunnel coolers, rack coolers and spiral coolers air conditioning, to suit the product and plant. All types are equipped with an ambient and chilled ...
... that provides segregation of cold aisle air flow from hot aisle exhaust air, in data centers. This protects equipment against damage, prolongs equipment life, reduces the load on the computer room air ...
Maximum temperature: 0 °C - 200 °C
... physical processes: Convection cooling provides heat exchange between product and air. Evaporation cooling on the other hand removes water from the product. The ambient or cooled air passes through one or more product ...
Power: 20 kW - 150 kW
... Efficient room cooling with a low cost of ownership. Leading edge precision cooling solutions specifically designed to maintain temperature and humidity within extremely tight tolerances. Perfect for racked and non-racked IT loads, these units meet ...
... Overview
Mechanical Bond Aftercooler engineered for locomotive charge-
air cooling.
- Durable round-tube core with copper fins
- Mechanical-bond tube-to-header joint for extended service life
- O-ring sealed
Power: 26.7 kW - 104.7 kW
Flow rate: 7,500 m³/h - 26,000 m³/h
... The MatrixAir™ precision cooling system has been developed to meet the increasing demand for ultra-efficient and large capacity. It is a room-based cooling system that can deliver efficient, precise, reliable control ...
Shenzhen KSTAR Science and Technology Development Co. Ltd
... Cooling systems are precisely matched to the system configuration. Each cooling system consists of internal and external cooling. Cooling ring (external cooling) Base body fully thermally insulated for increased ...
Power: 14,000, 12,500 W
... and faster defrosting with integrated electric heating elements. Reliable operation at high ambient temperatures Microchannel condenser, lateral and upward airflow, and defined engine compartment ventilation ensure ...
Schmitz Cargobull
Flow rate: 50 l/min - 800 l/min
Pressure: 0.6 MPa - 1 MPa
... Item | A-312 | S-312
Material | Alloy Steel | Stainless Steel
Tool Range | D3-D12 | D3-D12
Cooling Method |
Air-cooling |
Air-cooling
Coil Inner Diameter | ⌀45 | ⌀45
Tool Holder Diameter | Max. ⌀24 at small ...
... affected by Cooling Pressure Level The internal vacuum piping can be removed for faster maintenance and easy conversion Cooling air flow increased by 20% Retrofittable to any existing machine. No modification to section frame required. ...
Maximum temperature: -40 °C - 350 °C
The Fabfin heat sink stands out from ordinary extruded heat sinks because of its increased surface area, giving it excellent performance. Using a swaging process means a variety of its higher fins and increased height-to-space ratio types of fins can ...
... Active
cooler for standard Raspberry Pi 5 board.
Excellent cooling effect while operating.
Can be directly attached onto the Raspberry Pi Board.
Raspberry Pi 5 ACTIVE
COOLER is compatible with RPA-5 series.
*Raspberry ...
... - Inlet Air Cooling System for GT system - Semi Dry-Fog®, a fine fog with a mean droplet size of 10-30 μm, cools gas turbine intake air and improves power generation output during hot weather. Cooling ...
Power: 93.2 W
... Motor - 1/8HP (The motor of cooling system could be upgrade.) Size - 440x220x460mm ...
... cooling chambers and/or quenching tanks are available. A forced air cooling station with exhaust hood can be integrated in the line and fed by an automatic loading machine. Internal air recirculation is engineered using ...
... Answering to the many industrial needs, SIMACO - leader in the fluid moving technology - designed a dedicated range of close loop air-water cooling units, where the SIMACO pump, actual beating heart, is naturally assembled. This product ...
... production line management flexibility. • AISI 304 stainless steel machine • Plastic conveyor belt • Forced ventilation system for internal hot- air circulation • Insulated and enclosed holding cabinet for maintaining ...
... width of the machine. Due to the oscillating movement of the machine and the air flow over the entire surface, the grain is uniformly cooled and transported through the cooler. Various setting options ensure optimum adaptation ...
Pressure: 6 bar
... patented liquid cooler for cool down of shrink-fit chucks. Fast, contour-independent cooling, cleaning and rust protection. The housing of the FKS 04 S is filled with cooling water. The water is lifted into the tower by compressed ...
Power: 150 W
Pressure: 0 Pa - 196,133 Pa
... Colour 7-inch LCD touches screen display Control the full automatic equivalent change of new/used fluid Fluid outlet hose: 2.3m Fluid return hose: 2.3m New/used fluid tank: 20L×2 Dimensions: 630x670x1120mm Operation: Function with Cycle cleaning; ...
... OPTIONS: • SPRAYCOOL™ water addition systems • Inlet air fan and controls • Heated inlet air systems • Exhaust air systems • Weir gate assemblies FEATURES: • Choice of vibratory balancing ...
General Kinematics
... Coolant chillers are essential to your machining operation. Metalworking fluids must be maintained at a constant and correct temperature for your application to ensure you produce consistent high-quality parts. Quality is not something ...
... 1.The Industrial Chiller is mainly used to provide cooling water for high-end industrial equipment, at the same time, also widely used in mechanical processing and manufacturing,plastics and rubber,electrical and electronic, electroplating, ...
... using ambient air, but tempered air or conditioned process air can also be used for special applications. Depending on the application, coolers can be divided into different cooling zones. ...
JÖST
Power: 4.4 kW - 28.8 kW
Flow rate: 5 l/min - 320 l/min
Pressure: 26 bar
... Ferrari International air/oil coolers are made of aluminum to achieve high resistance to operating pressure and greater heat exchange capacity, all in very compact dimensions. They can be used for hydraulic power units, ...
... generators with hyper cooling capability, modular teeth design, and increased efficiency. How do they work? V-gen generates electric energy as any other outrunner electro-generator but the difference is that each of the stator teeth ...
Maximum temperature: 0 °C - 40 °C
Pressure: 2 bar - 7 bar
... Cold air generator at most 60°C lower than the intake air only by blowing compressed air (Vortex principle). Used for cooling in many applications. ...
Power: 230 W
Flow rate: 6,800 m³/h
... Air volume: 6800 m³/hour Air out size: 605 x 635 Water consumption: 6 – 11,5 l./H. Tension: 230 V. / 50 Hz. Consumption: 0,23 Kw. 3 speeds Water capacity: 120 l. Dimensions: 890 x 500 x 1380 mm. Noise: 56 dB. Net ...
... forced cooling, possible to reduce the length of the conveyor, can be achieved, whether not in air conditioned room, either by hoods with centrifugal fan blowed air ducts or by fans fitted in the final part of the conveyor. ...
... The powerful DC fan can forcibly remove heat accumulated in the mixer system. · Reduces mixer system temperature by approximately 10 degrees. · Suppresses mixer system temperature increase due to heat generated by material. · Realizes enhanced efficiency ...
Pressure: 70 psi - 115 psi
... tool-work interface. Expanded compressed air cools tooling and helps remove chips from the cutting interface. The mist coolant lubricates flutes, holes and chips to improve hole quality. The system operates with a ...
Power: 550 W
Flow rate: 2,000 m³/h
... Force- air-circulation cooling table for moulds of diameter up 400 mm. The optimum cooling of the moulds leads to its reuse sooner, for higher productivity and longer durability of moulds. It also useful to reduce defects. TRA MATIC ...
Power: 800 W
... cooled by water, allowing you to host up to 45 kW of equipment without heating the air on output, and without disrupting the ventilation of the servers. The heated air coming from the servers is cooled ...
... distortion or "checking." • The cooling conveyor is constructed in a modular fashion to allow for installation in various widths and sizes. • Fresh air intakes on the top of the cooling chamber provide adjustable amounts ...
Maximum temperature: 6 °C
... to 6°C core temperature possible stainless steel evaporator all current coolants usable Technical data: dimensions: 168 cm w x 117 cm d x 280 cm h smoke truck:101 cm w x 103 cm d x 202 cm h electric connection: 4kW refrigerating ...
Maximum temperature: -20 °C - 50 °C
Pressure: 5.5 bar - 12 bar
... Tool for the rapid filling of the radiator and the cooling system of cars and trucks. The system is vacuum-operated and allows for the cooling system to be filled quickly and completely, without having to start the vehicle ...
Power: 2.75 kW
... Quick Details Condition: New Place of Origin: Guangdong, China (Mainland) Brand Name: Shantou Huaxing Model Number: LQ Application: shrimp chips/ round chips Voltage: 380V/50HZ Power(W): 2.75 KW Weight: 1700KG Dimension : ...
Power: 12.5 W
... From hot to cold and vice versa with improved efficiency HANAU – VACUUMSCHMELZE GmbH & Co. KG (VAC) is developing of environmental friendly materials for magnetocaloric cooling. The collaboration with the Fraunhofer IPM Institute and ...
the best suppliers