Volumetric flow rate: 20 l/h - 300 l/h
Process temperature: -40 °C - 80 °C
Process pressure: 1.8 bar - 3.4 bar
... what is Diesel Flow Meter? The diesel flow meter is a device to measure linear, nonlinear, mass or wide flow rate and volume flow ...
Flowtech Measuring Instruments Pvt. Ltd.
Volumetric flow rate: 0 m³/h - 1,133 m³/h
Process temperature: 150 °F
Process pressure: 100 psi
... PLUS™ FLOW MEASUREMENT FOR GASES AND LIQUIDS The Flo-Tronic Plus™ is based on a standard Flo- Meter™ with or without a manual flow control valve. It provides visual flow ...
Process temperature: 5 °C - 50 °C
Precision: 1.5, 1 %
... alarm settintg. ・Change of the calibration temperature, etc RS485 communication. Pulse output for totalized flow. Control of flow in the case of needle valve. CE ...
KOFLOC Corp.
Volumetric flow rate: 1 m³/h - 4 m³/h
Process temperature: 50 °C
Process pressure: 0.3 bar - 16 bar
... starting flow and is permitted for all installation positions. The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning and is the basis ...
Volumetric flow rate: 0.5 l/min - 1,200 l/min
Process temperature: -40 °C - 350 °C
Process pressure: 0 bar - 150 bar
... or customised for OEM flow meter applications: Metri IC-LPM Paddlewheel Flow Meters are manufactured and supplied with either threaded or flanged connections and a variety of output ...
Metri Measurements
Volumetric flow rate: 20 l/min - 120 l/min
Precision: 1 %
... This flow meter is to measure the exact quantity of the dispensed fuel. They are designed for non-commerical use only. These flow meters are reliable, inexpensive, easy to install and ...
... modern and precise flow meter with internal data logging. Equipped with two analogue inputs and two PULS inputs, can measure flow and other values, such as temperature and humidity. In ...
Volumetric flow rate: 2.5 m³/h - 7.9 m³/h
Process temperature: 0 °C - 90 °C
... In this version a totalizator meccanic head complete of analogic face is applied on the flow meter ,that face reports the differnts scales expressed in liters 0 - 100 - 200 - 500 - 1.000 - 2.000 - 5.000.The avaiable diamaters ...
Process temperature: 0 °C - 50 °C
Process pressure: -0.8 bar - 8 bar
Precision: 5 %
... The flowmeters FLUX 0 series are miniaturized devices used to measure air flow rate. They come complete with push-in pipe fittings. Numerous functions can be viewed and set on a three-colour display. They have 2 digital ...
...
- Independent, maintenance-free sensor system for continuous grease condition monitoring
- IP67 protection against dust and water
- Multiple interfaces supported: analog, digital and
... amplitude and in frequency. Dynamic flow : The rate of flow is deduced from a mathematical analysis combined with a calibration (with real measures). Flow no Flow : The threshold can ...
Volumetric flow rate: 60 m³/h
... IFM30 impact sensor
Impact Flow Meter System Specifications
Material: ...
Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 3.5 bar
Precision: 3 %
... Flow meter for streaming liquids according to the measurement principle of a swashplate. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), RME, vegetable oil Plastic/aluminum housing Flow: ...
... It measures the quantity in litres of liquid passing through it. It works with flow rates from 10 to 90 lt/min and a maximum pressure of 3.5 bar. It displays the total liters up to 999999 liters and the partial liters up to 999 liters ...
the best suppliers