Fittings

Diameter: 3 mm - 14 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials ...

Diameter: 4 mm - 14 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...

Diameter: 4 mm - 14 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...

... Black • - Material: Polyamide/Nylon 6.6 • - Number of Batteries: 0 • - Product Name: plastic fitting for conduit • - Product Type: Conduit Fitting with NPT Threads • - Size: NC 34mm

Diameter: 12 mm
Operating pressure: 1 bar

Product details Thread: Metric, PG, G(PF), NPT Materials: UL approved and halogen-free nylon PA66(Flammability UL94V-2) for A.C.F parts. EPDM rubber for B. D parts. (Accept to order super rubber: high temperature resistance, ...

Materials: UL approved Nylon PA66 ( Flammability UL94V-2)Working temperature: -40℃-100℃, can up to 120℃ in short time. Features:Strong tensile strength, Fast plugging and unloading, improved the installation efficiency.Can be used for ...

Diameter: 0.25 in - 2 in
Operating pressure: 10 bar

Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available

Diameter: 4 mm - 16 mm

Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...

Diameter: 4 mm - 16 mm

Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...

Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar

With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. All fittings ...

The stainless steel barrel screw joint with a R 2" steel fine outer thread for tubes with a diameter of 32 mm.

Diameter: 3 mm - 15 mm

The Plastic Y Barbed Coupling, manufactured by Burkle, is ideal for applications such as pharmaceuticals, laboratory, industrial or manufacturing, water sampling and food processing. This provides a leak free and flow control fluid handling ...

Diameter: 3 mm - 15 mm

The hose tubing connector is characterized by its cylindrical straight structure. It fits various hose sizes and has two versions. The Polypropylene type resists working temperatures of up to +135°C while the Polyvinylidene fluoride type ...

Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar

Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...

Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar

Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...

Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar

Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).

Operating pressure: 100 psi

Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. SPECIFICATIONS ACCURACY: See “Precision Orifices” MATERIAL: FDA Approved Polysulfone/Polycarbonate MAX. ...

Operating pressure: 100 psi

Barbed fittings with Orifice Insert Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. Specifications ACCURACY: See “Precision Orifices” MATERIAL: ...

Diameter: 40 mm - 400 mm

Reusable aluminum coupling system, suitable to be fitted to MARMOTECH® and STEELBLAST hoses,including: • Aluminum semi-flanges according to UNI EN 1092-1 PN 10 (ex UNI 2277) • Flat black SBR gasket • Bolts, nuts ...

Diameter: 4, 6 mm
Operating pressure: 10 bar

... Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well as fittings of series 1 to 3 out of plastic are indispensable and well-proven accessories ...

Diameter: 6 mm

... with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...

Diameter: 8 mm

... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...

Diameter: 10 mm - 100 mm

... large range of these Fixings & Fittings for Adjustable Feet in stock ready for free or next day delivery, along with free samples which can be sent out if you'd like to test suitability before placing an order. These ...

Pipe connectors Suitable for realizing watertight, current leading connections between high current pipes. Hexagonal design is standard. But on request also in octagon or as groove nut design deliverable.

Diameter: 0.25 in - 4 in

Exd IIC Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: ...

Diameter: 3 mm - 14 mm
Operating pressure: 20 bar

The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...

Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar

The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings ...

Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi

Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: ...

Diameter: 11 mm

The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature ...

Diameter: 11 mm
Operating pressure: 40 bar

Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...

Diameter: 7, 16, 11 mm

Essential for all the fields of maintenance and mechanical repair, cars, trucks, assembly lines... Also adapted to all the fields of maintenance and repair in general mechanics, truck garage, carrier, construction industry, shipyards, ...

Rubber Lined Pipes and Fittings Rubber Linings are a premium form of corrosion protection for some of the most severe chemical and abrasive environments. We have a wide range of rubber compounds in Natural and ...

Diameter: 0.5 in

Stainless Steel hex nipple ½” NPT x ½” NPT for ¼” sheath spring loaded with S.S. spring and “o” ring seal. Also available S.S. 316.

Diameter: 0.5 in

S.S. 304 hex nipple 1/2″ NPT X 1/2″ NPT for 1/4″ sheath. Other sizes available upon request. Also available in Stainless Steel 316.

This exceptional 3 piece design arrangement of union and nipple available in six Different lengths. The essential advantages of this design over the conventional Nipple-Union-Nipple

Diameter: 100 mm - 650 mm

The perfect fit for demanding connection needs Safely replace your fittings in less than 40 seconds, without tools! Hygienic, waterproof, no dead zones On traditional flexible sleeves mounted with hose clamps, a ...

Diameter: 150, 200, 80, 100, 65 mm

... standard Tri-Clamp fittings in many food, chemical and pharmaceutical applications. Specifications • Food grade VMQ Silicone transparent (other materials on request) • Diameters from DN 65 to DN 200 mm • For Tri-Clamp ...

... convectors. Only one fitting is needed for most installations for adequate diversion for upfeed radiation. For most applications, a second fitting can be used if higher resistance is required Copper ...

Push type, plated fittings permit lubricant to flow. Built-in ball, under spring pressure, prevents dirt from entering. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment ...

Diameter: 5, 12, 50, 25, 9 mm
Operating pressure: 64 bar

Clean-break safety coupling with easy-to-clean ball face shape; connection almost free of air inclusion, low in leakage when disconnecting. Connectable under pressure, non-squirting, high flow rate, automatic lock. Materials: stainless ...

Diameter: 6 mm - 25 mm
Operating pressure: 16 bar

Clean-break couplings for water coolant. These types are used, among other things, for the connection of power modules to cooling circuits, primarily in rail engineering. Media: cooling fluids / water Materials: anodized aluminium ...

Diameter: 6, 9, 11 mm
Operating pressure: 12 bar

Compressed air coupling in very light design for use on the tool side Media: compressed air Materials: coupling housing: aluminium hardcoated locking sleeve: impact resistant plastics Special features / Options: Compressed ...

Diameter: 12 mm
Operating pressure: 250 bar

Application area Meiler automotive engineering Connection 1 metric cylindrical inner thread Sealing form 1 for screw-in pins with shapes A, B and if necessary E Material Steel Surface electro galvanised ...

Diameter: 6 mm - 31 mm
Operating pressure: 160, 420, 400, 315, 300 bar

Application area Automotive engineering Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Residual pressure Coupling under residual pressure is possible Material ...

Diameter: 4 mm - 38 mm
Operating pressure: 160 bar - 450 bar

Application area General application, e.g. in industry, construction machinery, agricultural technology etc. Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Residual pressure Coupling ...

Diameter: 4 mm - 16 mm
Operating pressure: 10 bar

for aggressive air, gases and liquids in an aggressive environment, e.g. in laboratories, process engineering, biotechnology, medical and laboratory technology Characteristics, speciality • easy and fast to install • extensive product ...

Diameter: 2 mm - 35 mm
Operating pressure: 250 bar

- easy and fast to install - compact size - extensive range - many combination possibilities M = connection nut with metric thread (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2), surface ist pickled Nominal pressure ...

Diameter: 4 mm - 15 mm
Operating pressure: 125 bar

easy and fast to install - compact size - extensive range - many combination possibilities G = connection nut with British Standard Pipe (BSP) threads (M and G are not interchangeable) Material Brass CW 617N (CuZn40Pb2) , surface is ...

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar

Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar