... vehicle frame - Long service life and low noise emissions, thanks to separation of gear and impeller - Easy wheel change, thanks to maintenance-friendly design Hub gears from Framo Morat are suitable for a huge range ...
Framo Morat
Rotational speed: 4,000, 3,000, 8,000, 6,000 rpm
Backlash: 0.05, 0.08 rad
... The low-backlash planetary gearheads of the GSA series are designed for high positioning accuracy and highly dynamic cycle operation. Ground, helical toothed precision components inside the gear ensure low running noise ...
Framo Morat
Rotational speed: 3,000 rpm - 10,000 rpm
Backlash: 0.05, 0.08 rad
... high performance in combination with low backlash and high precision. Helical gears ensure a minimum noise level and smooth running. The robust, one-piece housing improves the gear rigidity and enables the absorption ...
Framo Morat
... Planetary gearbox with pneumatic clutch brake Standard output torque: 4,000-160,000 Nm One-stage reduction up to i=10 Standard units and customised solutions ...
GOIZPER
... Planetary gearbox with integrated safety brake One-stage reduction up to i=8 Standard units and customised solutions Dual reduction option Interface for common servo motors ...
GOIZPER
... Planetary gearbox with hydraulic clutch brake One-stage reduction up to i=10 Standard units and customised solutions ...
GOIZPER
Gear ratio: 3.7 unit - 721 unit
... Product overview
- RP42 is a 42 mm planetary gearbox / gear motor designed for demanding industrial automation and robotic applications. Standard ball-bearing support, radial load up to 200 N, axial load
Backlash: 2.5 rad
Gear ratio: 4.44 unit - 2,510 unit
... Overview
RP48 is a 48 mm planetary
gear motor /
gearbox designed for high-load industrial drives, winches and robotic chassis. Standard ball-bearing output supports radial loads up to 200 N. Available
gear ...
Gear ratio: 3.6 unit - 307 unit
... Product Overview
RP56 is a planetary
gearbox (planetary
gear motor / gearbox) designed for heavy-duty mobile platforms and industrial lifting equipment. Nominal outer diameter: 60 mm (confirm final outer-dimension ...
Rotational speed: 3,500 rpm - 15,000 rpm
Backlash: 0 rad - 0 rad
Gear ratio: 11 unit - 40 unit
... Introduction
The FHG-II series strain wave drive integrates a cross‑roller bearing coupling on the wave generator to enable automatic fine adjustment of coaxiality. The cam‑shaft bore can be tailored to the customer's motor; the ...
Suzhou Honpine Precision Industry Co., Ltd.
Gear ratio: 50, 80, 100, 120 unit
Weight: 0.51 kg - 4.6 kg
... information about HONPINE harmonic drive reducers, please visit: https://www.honpine.com/Harmonic-Drive- Reducer.html To view HONPINE harmonic drive reducer drawings, please check: https://www.honpine.com/Harmonic-Drive- Reducer_zlebvo.html ...
Suzhou Honpine Precision Industry Co., Ltd.
Rotational speed: 4,000 rpm - 15,000 rpm
Backlash: 0 rad - 0 rad
Gear ratio: 11 unit - 120 unit
... design with multiple connection options
Suzhou Honpine Precision Industry Co., Ltd.
Rotational speed: 3,000 rpm - 10,000 rpm
Backlash: 0.02 ° - 0.12 °
Gear ratio: 3 unit - 100 unit
... Precision Planetary
Gearbox for Servo Moto
Model:42\60\90\115\142\180
Ratio:3 - 100
Backlash: ≤1arcmin -≤7 arcmin
Nominal Output Torque: 18 - 1140 Nm
Product Overview
NB series adopts the design of integrating its ...
DESBOER
Rotational speed: 2,000 rpm - 10,000 rpm
Backlash: 0.02 ° - 0.12 °
Gear ratio: 4 unit - 200 unit
... Right-Angle High-Precision Planetary Gearbox
Product Overview:
DESBOER NDR Series takes high-precision flange
gearbox with spiral bevel
gears, 2–9 arcmin backlash, 4-star performance, and high torque/load capacity ...
DESBOER
Rotational speed: 2,000 rpm - 10,000 rpm
Gear ratio: 3 unit - 100 unit
Weight: 0.6 kg - 60 kg
... DESBOER NE Series Precision Planetary
Gearbox for Servo Motor
Product Overview:
DESBOER NE Series is a cost-effective, high-precision
gearbox designed for universal servo applications. Combining high positioning ...
DESBOER
Rotational speed: 1,000 rpm - 8,000 rpm
Backlash: 0 ° - 0.08 °
Gear ratio: 3 unit - 100 unit
... customers, NIDECSHIMPO is now off ering Washdown and Food Grade à la carte options for our inline and right-angle planetary reducers. These options provide ultimate fl exibility without sacrifi cing on precision and performance. Upgradeable ...
Power Ace India
Rotational speed: 2,000 rpm - 8,000 rpm
Backlash: 0 ° - 0.08 °
Gear ratio: 3 unit - 100 unit
... to assemble the gearhead onto their machinery. The positional accuracy and torque handling capabilities are an ideal fit for packaging machinery, medical equipment, and custom assembly cell automation. The VRB Series planetary gearbox ...
Power Ace India
Rotational speed: 3,000 rpm - 5,000 rpm
Backlash: 0 ° - 0.25 °
Gear ratio: 3 unit - 81 unit
... intelligent selection for a higher performance planetary gearbox at an ultimate value for standard duty motion control applications. The VRSF utilizes a lightweight aluminum frame, helical cut gear, and bearing span that ...
Power Ace India
... Planetary
gear
reducer by custom-made
We flexibly design reduction ratios and mounting shapes according to customer requests.
The product can also be used as a increaser.
High transmission efficiency
・high ...
... according to customer requests. The product can also be used as a increaser. High transmission efficiency ・high prescision gears ・smooth tooth surface Excellent packaging ・Smallsize ・lightweight Typical specification ・Reduction ...
Backlash: 0.1 grad - 0.6 grad
Gear ratio: 13,600 unit
... ACBAR eccentric gears are indestructible and allow greatest gear ratios in minimal space. What ACBAR eccentric gears especially characterized. • Compact and indestructible • Ratios up to 13‘600:1 single ...
AKIM AG
... What AKIM Straightening & Swivel Gears especially characterized. • Construction according to customer specifications • Multi-stage construction • Low or adjustable backlash available • Nominal torque up to 60‘000 Nm • High repetitive ...
AKIM AG
Backlash: 0.02 grad - 0.5 grad
... AKIM two-Disc Gears are robust, strong and reliable – even for rough use. They are available in two versions: with output side shaft end or with hollow output shaft to put on. What AKIM two-disc gears especially characterized. • ...
AKIM AG
Rotational speed: 7,300, 3,650 rpm
Gear ratio: 50 unit - 120 unit
... Nexen’s revolutionary Harmonic Gearhead (HG) is the ideal combination of size and precision. The Harmonic Gearhead integrated with Nexen’s Roller Pinion System creates a true backlash-free solution from the motor to the ...
Power: 0 kW - 22 kW
... Our shaft mounted gears and geared motors are especially designed for universal application and can be supplied with either a solid or hollow shaft. The housings are produced from first class grey cast iron with rugged walls. The product ...
Rehfuss Drive Solutions GmbH
Power: 3.3 kW - 190 kW
Gear ratio: 4, 3, 2, 5, 1 unit
... that uses the following application information to select a bevel gearbox. • Bevel Gearbox Input Speed (rpm) • Bevel Gearbox Output Speed (rpm) • Bevel Gearbox configuration • Required Output Torque ...
Gear ratio: 12.94 unit
... NEMA 23 Input, 90 in-lbs Torque Specifications Gearing: Hardened Steel, AGMA Class 9 Housing: Precision Machined Die Cast Aluminum Lubrication: Grease Filled, Sealed and Gasketed Bearings: Needle and Thrust Ball Shafts: Hardened Steel Mounting: ...
BISON
Rotational speed: 1,420, 1,730 rpm
Power: 200 W - 3,700 W
Gear ratio: 3 unit - 80 unit
... surface hardness of the gear reaches HRC62 after carburizing and quenching, so as to obtain the best wear resistance and impact toughness.. The bevel gear part of the reducer adopts the structure of hypoid ...
WANSHSIN SEIKOU (HUNAN) CO., LTD.
Rotational speed: 2,100 rpm - 7,000 rpm
Backlash: 0.02, 0.03, 0.05 °
Gear ratio: 5.5 unit - 220 unit
... High Torque Optimized Output Torque & Inertia Moment High Precision Long Service Life Low Noise Limited Temperature Rise Support Flange/Curvic Interface Suitable for Rack & Pinion Applications ...
Apex Dynamics
Rotational speed: 2,000 rpm
... with G series new sizes of reducers are introduced in standard and hollowshaft design to broaden portfolio nad application range of TwinSpin reducers. It comes in two variants, with sealed output only or as a fully sealed ...
SPINEA
Power: 0.06 kW - 4 kW
... It is the best solution for the resistance to corrosion. Suitable for all applications. Entirely in stainless steel with smooth surfaces for easy cleaning. Also available with stainless steel motor SPM series ...
CLEAN-GEARTECH
... indicators. • Available versions: - Gear reducer - for threaded shaft (shaft not supplied) - with magnetic sensor - with permanent magnet motor - with permanent magnet motor and magnetic sensor - with gearmotor - ...
FIAMA
Rotational speed: 400 rpm
Power: 0 kW - 600 kW
... Series is specially designed for applications and sectors that request high torque within restricted area. The design of our IPR gear units not only provide high performance ratings into compact dimensions, but the large range of configuration ...
I-MAK Réducteurs
... cleanliness and/or for a drive solution with a low noise level? Thanks to their non-contact power transmission, magnetic gearboxes offer a truly innovative solution. The availability of different ratios and sizes gives you additional ...
... -V / H-EThe PSC-V / H-E sub-assemblies are particularly low-backlash gearboxes and are mainly used in the field of robotics. More about our sub-assembliesYour advantage:The gearboxes can be mounted directly to your equipment ...
Melior Motion GmbH
... Onvio's Dojen™ cycloidal speed reducer has been providing engineers with the highest precision servo reducer available on the market for more than 25 years. It offers TRUE Zero backlash by combining a compound reduction ...
ONVIO
Rotational speed: 450 rpm - 6,000 rpm
Backlash: 0 ° - 0.16 °
Gear ratio: 3 unit - 100 unit
... We supply the suitable gear box for your motor; just use your servomotor. max® planetary gear units We can supply you with German branded gear boxes which can be fitted to almost all motors without ...
... PUL servo planetary gearbox series are developed according to one-piece principle to offer precise and reliable operation. One-piece components, the gearbox, planetary gears carrier and sun gear, features ...
Sesame Motor Corp.
... Basic model with different gear wheel arrangements 8000 Nm max. torque Coaxial and right angle input and output ...
TANDLER
... SINGLE STAGE GEARBOXES [ ONE-STEP GEAR ] FEATURES AN IDEAL PRE-REDUCTION Item for any gearbox APPLICATIONS Pump mixers and screw conveyors ideal applications AN ALTERNATIVE An ideal alternative ...
HYDROMEC
... precision gears and transmission components Custom-made precision gear units: Spur gear units Worm gear units Bevel gear units Change-speed gear ...
ATLANTA
Rotational speed: 2,000 rpm - 10,000 rpm
Backlash: 0.02 ° - 0.12 °
... robust bearings Single-piece design for ring gear & housing Single-piece design for sun gear & input shaft ensuring high concentricity Full complement solid uncaged needle roller bearings for planet gears All ...
GEARKO
Rotational speed: 6,000, 8,000 rpm
Backlash: 0.08 ° - 0.22 °
... ECONOMICAL, RELIABLE, PRECISE Access is a low-backlash planetary gearbox designed for moderate to medium-duty applications with variations of torque. It is popular in cartesian pick&place robots. Acceleration capacity+++ Fast reversals+++ Radial ...
RECKON DRIVES INTERNATIONAL S.A.S.
Power: 4.5 kW - 10,000 kW
Weight: 30 kg - 20,000 kg
CMD
Power: 0 kW - 140 kW
Gear ratio: 6.8 unit - 597 unit
... Overview
Bevel-helical (bevel helical) and parallel shaft
gearboxes in the H series are designed for heavy-industry applications requiring continuous duty or elevated driving torque. The design supports high transmission efficiency ...
TRAMEC
... The compact Float-A-Shaft® 1:1 low torque right angle gearbox offers maximum torques up to 100 in-lbs (11.3 Nm) depending on input RPMs. Models available with standard and foot mounts. • Slides along shafting limited only by keyway ...
Tolomatic, TOL-O-MATIC
Backlash: 0.05 °
Gear ratio: 61 unit - 121 unit
... Planetary gear units from STOBER: The premier class of drive technology. Since the 1980s, STOBER has specialized in the development of planetary gear units, the premier class of drive technology! At the end of 2019, ...
STÖBER
Gear ratio: 64, 16, 1,024, 256 unit
... Gearhead is a mechanism that can reduce (decelerate) the rotation speed of a motor and increase torque. When a gearhead is attached, the approximate number of revolutions can be calculated using the following formula. ...
Citizen Micro Co., Ltd.
... • 4 Sizes K 5.13 to KV 60.13 • Ratios K 5.13 - K 25.13 in 1: 1; 2: 1; 3: 1 • Ratios KV 60.13 in 1: 1; 1,5: 1; 2: 1; 3: 1; 4: 1 and 5: 1 • For multi-screw lifting systems • Efficent design, with cast-on base strips • Cast housing with prime cated ...
Pfaff Silberblau
Power: 459 kW
Gear ratio: 2.91 unit
Weight: 18,500 kg
... wheelset systems, CAF MIIRA gearboxes optimize life cycle cost, by means of light, reliabale and low noise solutions. Backed by a strong Rolling Stock Group, a worldwide service network gets us closer from customers. CAF MIIRA’s Gearbox ...
... 2SP78.. was developed to operate in conditions where the highest quality of control is an absolute prerequisite. Key features: -Unsurpassed level of precision: Max. 0.2° tolerance -Continuous duty: Meets Class D requirements of EN 15714-2 ...
Power: 350 kW
Gear ratio: 7 unit - 70 unit
... The Heavy Duty Stirrer Unit is designed for robust industrial applications. Radicon offers gears and transmission solutions from an extensive product range, catering to a wide range of industries.Robust construction for heavy-duty applicationsSuitable ...
Radicon
... Gearboxes for rail applications Tram / Light Rail We understand that our customers are looking for high quality gear systems which are value engineered to lower total cost of ownership. Walks the walk, talks the ...
Rotational speed: 1,800, 1,400 rpm
Power: 0.5 kW - 24.9 kW
Gear ratio: 5 unit - 100 unit
... flanges in die cast aluminium • Motor flexible coupling • Gears in cemented and hardened alloy steel • Support hub in grey cast iron • Synthetic oil for lifetime lubrication of the gears • RCA oil seal in NBR • ...
VARVEL
the best suppliers