Inner diameter: 50 mm - 300 mm
Outer diameter: 62 mm - 316 mm
Pressure: 15 bar - 60 bar
... coiled flat. Smooth inner tube to optimize flow. Bendable and collapsible hose design. Overview Inner tube oil resistant NBR, black, smooth Reinforcement synthetic ...
Inner diameter: 1.9 mm - 250 mm
Outer diameter: 31 mm - 280 mm
Pressure: 16 bar - 64 bar
... robust and flexible. Cover particularly resistant to hydrocarbons, abrasion, atmospheric conditions and ozone. Electrical conductivity assured by the inner tube compound. Overview Inner tube oil ...
Inner diameter: 16, 21, 19, 25 mm
Outer diameter: 25, 37, 31 mm
Pressure: 16 bar - 48 bar
... supplied ready fitted and tested with end fittings. Overview Inner tube petrol resistant NBR, black, smooth Reinforcement synthetic textile, braided Cover oil and weather resistant ...
Inner diameter: 2.9 mm - 8.4 mm
Outer diameter: 4 mm - 12 mm
Pressure: 0 bar - 15 bar
This device is highly resistant to temperature as well as to microbes, hydrolysis and chemicals. It works at a temperature-dependent operating pressure of -0.95-16 bar. It has an outside diameter of 4 to 12mm and an internal ...
Inner diameter: 1.6 mm - 30 mm
Outer diameter: 4.76 mm - 45 mm
Temperature: -60 °C - 135 °C
Formulated to withstand extreme temperatures from -75°F to 275°F, Tygon E-65-F tubing will not crack or deteriorate when used in demanding food and beverage applications. Extremely flexible, it resists kinks and retains its shape while ...
Inner diameter: 2.5 mm - 14 mm
Outer diameter: 4 mm - 16 mm
Temperature: -20 °C - 150 °C
... Temperature range -4 to 302 °F (-20 to +150 °C) - Free of plasticizer and PWIS - Resistant to UV, hydrolysis, microbes and solvents - Stable against thermal degradation - Resistant to weld spatter - ...
Outer diameter: 10 mm - 150 mm
Temperature: -30 °C - 150 °C
The PAL range of hoses, manufactured by ContiTech, stand for reliability, security and long service life. The hose covers are resistant to abrasion, ozone and UV and electrically conductive ...
Inner diameter: 9 mm - 150 mm
Outer diameter: 18 mm - 172 mm
Pressure: 16, 10 bar
Chemical and solvent hoses according to EN 12115 are highly flexible hoses for more than 75% of all industrial chemicals, technical solvents, water soluble paints, alskalis etc. Limits ...
Inner diameter: 13 mm - 50 mm
Outer diameter: 25 mm - 68 mm
Pressure: 18, 25 bar
Steam hose Type SD with steel braids is suitable for wet saturated steam up to 18 bar ( 210° C ) and hot water up to 120° C. Also usable for cold water up to 25 bar. Minimum burst pressure 180 bar ( 1 : 10 safety factor ...
Inner diameter: 4 mm - 100 mm
Outer diameter: 6 mm - 103 mm
Pressure: 6 bar - 250 bar
... stainless steel and PTFE. The hose ends are a result of careful calculations, and optimised through years of industry experience. ensuring a flexible pipe connection that will remain ...
Inner diameter: 55 mm - 900 mm
Pressure: 0.01 bar - 0.58 bar
Temperature: -150 °C - 280 °C
Material wall: multi-layered, PTFE laminate, electrically conductive < 106 Ohm clip profile spiral: hot-dip galvanised steel band Applications Phamaceutical industry Chemicals industry Low pressure range Danger ...
Inner diameter: 38 mm - 900 mm
Pressure: 0.016 bar - 0.94 bar
Temperature: -40 °C - 175 °C
... electroconductive, outer layer: HYPALON®-coated polyester fabric Applications Danger zones, which require electrically conductive hoses Phamaceutical industry Chemicals industry Low pressure range ...
Inner diameter: 50 mm - 900 mm
Pressure: 0.009 bar - 0.85 bar
Temperature: -70 °C - 250 °C
... conductive hoses Phamaceutical industry Chemicals industry Low pressure range Suction and conveyance of aggressive media, explosive gases and fumes Paint, wood and paper industry Solvent extraction Properties ...
Inner diameter: 40 mm - 900 mm
Temperature: -150 °C - 250 °C
Inner diameter: 75 mm - 900 mm
Temperature: -20 °C - 1,100 °C
Inner diameter: 50 mm - 900 mm
Temperature: -20 °C - 650 °C
Inner diameter: 51 mm - 406 mm
Pressure: 0.01 Pa - 0.18 Pa
Temperature: -20 °C - 100 °C
Plago Technical Hoses T99TERMO Heat-Resistant Suction and Delivery Hose The data reported in this table is approximate. The data of pressure and depression relate ...
Inner diameter: 1 mm - 50.8 mm
Outer diameter: 1 mm
Temperature: 316 °C
Constructed from silicone, the TUB range of high temperature protective caps are specially designed for use in working temperatures as high as 316º C (600.8º F). These caps are ideal for masking long pins and studs where ...
Inner diameter: 2 mm - 10 mm
Outer diameter: 4 mm - 12 mm
Pressure: 6 bar - 24 bar
... workplace environments. Among its advantages are non-ageing characteristics, chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, ...
Inner diameter: 15 mm - 102 mm
Outer diameter: 23 mm - 113 mm
Pressure: 0 Pa - 500,000 Pa
... corrugated outside, black color. Structure: EPDM synthetic rubber resistant to heat, wire loop, synthetic textile reinforcements, cover with EPDM grooves for extreme FLEXIBILITY, resistant ...
Inner diameter: 10 mm - 102 mm
Outer diameter: 20 mm - 122 mm
Pressure: 0 Pa - 2,000,000 Pa
Structure: substrate synthetic rubber EPDM heat-resistant black synthetic textile reinforcements, EPDM synthetic cover in heat-resistant and aging-coated fiberglass vulcanized ...
Inner diameter: 10 mm - 60 mm
Outer diameter: 20 mm - 75 mm
Pressure: 0 Pa - 1,000,000 Pa
Structure: EPDM synthetic rubber heat-resistant, reinforced synthetic textiles, synthetic covering resistant to aging and weathering. Appearance: black exterior smooth wrapped finish, ...
Inner diameter: 6 mm - 25 mm
Outer diameter: 13 mm - 34 mm
Pressure: 58 psi - 83 psi
... performance. The hose is flexible for easy routing and installation, resists the elevated temperatures common to engine compartments. Markets • General Industrial • Transportation Features/Benefits • ...
Inner diameter: 6.4, 12.7, 8, 9.5 mm
Outer diameter: 14.1, 21.4, 15.7, 18.1 mm
Pressure: 220, 250 bar
... water hose is a high-pressure cleaning equipment compatible with water, mineral oil (up to + 100°C) and water-oil emulsion media. It has outer synthetic rubber (environmentally safe), an inner synthetic rubber layer ...
Pressure: 20.7, 13.8, 17.2 bar
Temperature: -40 °C - 232 °C
... the steam service industry, only hoses that are manufactured from highest grade materials can take up to the high temperatures and pressures. Eaton steam hoses are contrived with high-class elastomers ...
Inner diameter: 6.6 mm - 51.1 mm
Outer diameter: 13.5 mm - 63.3 mm
Pressure: 40 bar - 225 bar
Wire Braid Hydraulic Hose exceeds EN 853 1 SN, with hot oil resistant hose liner TubeSynthetic rubber, resistant against hot oil, hydraulic fluids (HL, HLP, HLPD, HVLP, ...
Inner diameter: 11 mm - 87.8 mm
Outer diameter: 13 mm - 91.4 mm
Pressure: 50 bar - 2,000 bar
The EXTREME hose family are high performance products, designed for high demanding applications with superior abrasion and weather resistance, long lasting ozone resistance and many other features. The EXTREME hose ...
Inner diameter: 6.4 mm - 25.4 mm
Outer diameter: 13.7 mm - 34 mm
Pressure: max 20.68 bar
... applications. Non-conductive, minimum electrical resistance, greater than (1) megohm per inch of hose length at 1000 Volts DC. Inner Tube: Chemivic© oil and heat resistant synthetic ...
Inner diameter: 20 mm - 508 mm
Outer diameter: 27 mm - 522 mm
Pressure: 0.25 bar - 4.305 bar
The AIRDUC® HT-PUR 355 from Norres is a suction and transport hose for industrial use with high pressure and vacuum-resistance. It also serves good resistance to high temperature up to 150°C. Also, it ...
Inner diameter: 19 mm - 101.6 mm
Outer diameter: 32 mm - 116 mm
Pressure: 2 bar - 21 bar
TUBE : HYDRAULIC OlL RESISTANT SPECIAL NBR RUBBER REINFORCEMENT : HIGH TENSILE SYNTHETIC TEXTILE AND STEEL WIRE HELIX. COVER : OIL.HEAT,ABRASION,OZONE AND WEATHER RESISTANT ...
Outer diameter: 30 mm - 400 mm
Pressure: 0.2 bar - 1.8 bar
Temperature: 0 °C - 140 °C
Product description Very high heat resistance, smooth bore Material: Soft-PVC, translucent Single Length: 10 and 15 m Temperature Resistance: 0° up to + 140° Application: The spiral hose ...
Inner diameter: 102 mm - 1,240 mm
Pressure: 0.007 bar - 0.245 bar
Temperature: -70 °C - 280 °C
... Highly flexible • Excellent weather resistance • Construction is qualified for application in 94/9/EC-zone 0/20 • Hose wall with non stick surface • Surface resistivity Ro<106 Ohm • Small bend ...
Due to the manufacturing process of these Moldflon™ Thermoplastic materials, extruded tubes made from Moldflon™ offer significant advantages over PTFE-tubes. Essential Advantages: Customized shape Large scale production Short ...
Inner diameter: 10, 8, 6, 4, 2 mm
Outer diameter: 12, 10, 8, 6, 4 mm
Pressure: 22.5, 15, 10, 8, 6 bar
Inner diameter: 3 mm - 22 mm
Outer diameter: 4 mm - 25 mm
Temperature: -65 °C - 260 °C
PFA Hose FEATURES 1.High weathering and heat resistance 2.Excellent chemical resistance,anti-acid/alkali,anti-fouling,and anti-stick performance 3.Working temperature range:-65℃~+260℃ 4.Smooth surface ...
Your suggestions for improvement:
Receive updates on this section every two weeks.