Knife mills

Output: 60, 40, 70 kg/h

The Junior Double Rotor is used for processing and machining large sprues as well as parts. It comes with two rotors which are located in the cutting chambers. These rotors are intended to process substantial sprues or parts. The double ...

Rotational speed: 2,000 rpm - 10,000 rpm

The knife mill GRINDOMIX GM 200 is perfectly suited for grinding and homogenizing foodstuff and feedstuff. It accepts sample volumes up to 0.7 liters and homogenizes substances with a high water, oil ...

Rotational speed: 700 rpm - 3,000 rpm

Cutting mills are designed for grinding soft, medium-hard, tough, elastic, fibrous materials, as well as heterogeneous mixes of products. The heavy-duty Cutting Mill SM 300 excels especially in the tough ...

Rotational speed: 1,500 rpm

The Cutting Mill SM 100 from Retsch is an economical unit especially designed to achieve powerful and quick grinding of materials for routine applications. It offers defined fineness due to the bottom sieves with aperture ...

Output: 65 kg/h

The SINCRO EKO line is the generation’s new ultra-granulator for copper and aluminum cable processing. This machine is available in four diffrent models, each has a capacity range from 50 to 400 kgs/h. Due to the evolution of this machine, ...

Output: 130 kg/h

Guidetti’s 315 EKO Systems are part of the company’s Sincro Eko line of granulators. These devices are generally utilized for applications that involve processing operations of aluminum and copper. They permit minimization of manufacturing ...

Output: 200 kg/h

The improved generation of compact granulators for copper and aluminum cable processing, the SINCRO EKO line comes in 4 version, with a capacity range from 50 to 400 kgs/h. The evolution of the SINCRO EKO has permitted a comprehensive ...

The Kongskilde MultiDicer cuts thick paperboard down into sizes below 75x75 mm. These dimensions can be conveyed in Kongskilde's normal conveying systems typically with a pipe diameter of 160 mm. This means that paperboard skeletons from ...

The Kongskilde Inline Granulator KG has been developed specifically to granulate plastic foil and, thereby, enable process waste to be reclaimed and reintroduced into the production process. Typical applications are in connection with ...

The finest cut! General Fine Cutting Mills of the type SecoMy® S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting ...

Output: 220 kg/h - 820 kg/h

Cutting Mills of the type SecoMy® are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. Application areas include materials that must be finely ...

Rotational speed: 1,300, 1,070 rad.min-1

CONDUX CS-Z Fine Cutting Mill is the ultimate device used in the size reduction of non-friable and soft products. The device is capable of providing fine cuts, thanks to their maximum level of cutting stroke combined ...

Output: 50 kg/h - 1,500 kg/h

... and don't need any sharpening process. The gaps between the rotor blade perimeter and screen is maintained by changing the knife size using some tools. This helps in reducing friction and thermal stress of material. Changing ...

Output: 150 kg/h - 8,000 kg/h

... chance for the rotor knives to lift or loosen during heavy shock loads. The knife bolts attach to a removable and replaceable threaded clamp. The rotor flights nor the knife carrier are threaded preventing ...

... Noise emissions and energy consumption is reduces due to double angle cut. There is no need for special knife sharpening as all the knifes are straight sharpening. All the different cutting knives ...

Rotational speed: 1,500 rpm

Rotational speed: 50 rpm - 3,000 rpm
Output: max 60.0 kg/h

... sample material The NEW Universal Cutting Mill from FRITSCH is ideal for size-reduction for a wide range of different materials due to variable adjustment of the rotational speed of the rotor, various knife ...

Rotational speed: 2,000 rpm - 14,000 rpm

Laboratory Mixer - Industrial-Grade Mill Homogeneous samples in the shortest time: With four cutting edges the FRITSCH innovation grinds even problematic samples! The new FRITSCH PULVERISETTE 11 is the ideal Knife ...

Rotational speed: 2,800 rpm - 3,400 rpm
Output: 50 kg/h

For a wide range of common applications The FRITSCH Cutting Mill PULVERISETTE 15 is ideal for the comminution of dry sample materials with soft to medium-hard consistency, for fibrous materials or cellulosic materials, ...

... Greemman granulator is applied sealed room design for main housing and knife, so noise during operation is controlled in low level as well, in addition, stagger and step type of knifes make scrap are ...

Rotational speed: 600 rpm - 6,000 rpm

... adjustability. The raw materials are consistently filled into the mill chamber via an oscillating valve. The fast rotating knives mill the product either by cutting or pounding. Subsequently, the mill ...

The scrap chopper is provided to cut the edge strip produced during the edge-trimming process to short pieces for removal by transport conveyor. The most essential parameters - Automatic adjustment to strip widths ...

Rotational speed: 420, 500 rpm
Output: 600 kg/h - 1,200 kg/h

With the aggressive intake zone in the cutting chamber, seizes even thickwalled stock outages or large hollow shapes reliably; the noise level remains low. High throughput is attained by virtue of the optimal ratio between rotor diameter ...

CONVERTS LARGE INTO SMALL PERFECT FOR CUTTING INTO SMALL GRANULES The THM CM Cutting Mill is the right choice for cutting of pre-size-reduced parts into smaller granules. Size reduction takes place by a wear resistance ...

The vertical agitated medial mill contains a cylindrical grinding chamber packed with grinding beads (minute size in mm). The ratio of grinding beads to product is modified to fill all spaces. The particle size of the ...

Output: 50 kg/h - 100 kg/h

The L line is a high capacity small granulator that has a robust and efficient design which features a slow-speed engine. It produces quality granule with a real helical cut. It is equipped with a sturdy motor, a high rotation torque ...

... Universal Cutting Mill USM granulates precisely and quickly material already pre-shredded. The results are defined, pure-grade granule sizes of secondary raw materials, which can be used for the production of new products. ...

Output: 70 kg/h

... model MAS2. The unit features a reduced rotational speed of 200rpm which ensures a uniform regrind and minimal fines. The knife is found above the screw and the larger auger trough of 600 x 280mm is used for wider runners.

The CPM Wolverine Proctor Shredding Mill is engineered for future expandability. This high-capacity machine provides superior throughput while ensuring biscuit uniformity. Its Programmable Logic Controller (PLC) makes ...

... Upgradeable With Cail & Fletcher heavy duty in-line shredder the existing carrier can be used when upgrading. Mills are protected from rocks and metal. Mill roll wear is significantly less than with ...

The SML 16 models are a series of particularly wide machines with smaller rotor diameters for the processing of thin-walled panels and skeleton waste, directly in the deep drawing line. The very low design of the granulator makes it suitable ...

The Knife Mill, type PS is used for single-step size reduction of different types of rubber that are easy to shred, such as NBR, SBR and EPDM in standard bale size. The rubber can be cut into granule ...

Output: 227, 318 kg/h

BTP Series Beside-the-Press Granulators offer solutions for processing edge trim, runners, and rejects in a compact footprint. BTP Series Granulators are offered in a range of sizes and throughput to deliver the right solution for your process.

Rotational speed: 120 rpm
Output: 40,000 kg/h

... Multicrusher is an effective, universal chopping unit for use with liquids containing solids. The basic design of the twin-shaft chopper is based on the proven Börger Rotary Lobe Pump. With the wide spectrum of 5 series ...

Rotational speed: 150 rpm

... grinders such as low noise characteristics and near dust-free product, GSL 180/120 to GSL 180/430 stand out due to their special knife, rotor, ‘quick-snap’ opening and good accessibility features.