Monobloc valves

Pressure: 2 bar
Temperature: 0 °C - 70 °C
Flow rate: 60 l/min

NIV series multi-channel gradient valves feature multiple 2-way, normally-closed PTFE media isolation valves connected around a central body. This unique design provides significant reduction in internal ...

DN: 100 mm - 140 mm
Pressure: 2.5 bar
Temperature: -20 °C - 90 °C

VW Butterfly Valves are the ideal solution for the interception of gravity-fed or pneumatically conveyed dry powders or granules in a variety of bulk solids handling and processing plants. VW Butterfly Valves ...

Pressure: 400 bar
Temperature: -30 °C - 80 °C

... are made with anti-corrosion treatment, BSP or NPTF inlet and outlet tread. The Metering Valves can be supplied with adjustable or fixed discharge. The Valves with adjustable discharge are fitted with ...

DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C

Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in ...

DN: 0.25, 0.5 in
Pressure: 300 psi
Temperature: -10 °C - 60 °C

The Multi-Port Monoblock valves is mostly preferred for industrial machineries with multi-port configurations suitable for low and high pressure applications. It can be automatically operated or pneumatically. ...

DN: 0.25 in - 4 in
Pressure: 16, 25 bar
Temperature: -10 °C - 120 °C

Ball valves, Ball valves on brass PN 25/40 (CW617N) In order to use the valve, the threaded parts and body need to be cleaned. If compressed air is present, use it for cleaning. Make ...

DN: 50 mm - 1,200 mm
Pressure: 10 bar
Temperature: -10 °C - 120 °C

... Surface drainage Suspended solids treatment Tank cleaning Waste water Waste water transport Water Design Knife gate valve to DIN/EN with wafer-type single-piece or two-piece body made of grey cast iron, bi-directional, ...

DN: 8 mm - 100 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 143 °C

The externally controlled diaphragm valve Type 2033 consists of a pneumatically operated piston actuator, a diaphragm and a tank bottom valve body. The proven and robust actuator with a plastic housing ...

DN: 50 mm - 1,800 mm
Pressure: 10 bar

... indicated by the arrow, intermediate flange valve can be used as end valve. Mounting Flange DIN EN 1092-1, PN 10, ANSI 150 Body material Cast iron GG 25, rust and acid resistant stainless steel 1.4408 Gate ...

DN: 40 mm - 80 mm
Pressure: 0.2 bar - 10 bar

The BERMAD Flow Control and Pressure Reducing Valve is a hydraulically operated, diaphragm actuated control valve that limits system demand to the designed maximum allowed value; reduces downstream pressure ...

DN: 20 mm - 110 mm
Pressure: 10 bar

Cepex offers a complete range of ball valves in PVC-U and PVC-C (both manual and automatic), featuring the “Antiblock” system which prevents ball jamming. Valves are 100% hydro tested prior to leaving ...

DN: 0.125 in - 1 in
Pressure: 63 bar
Temperature: -20 °C - 180 °C

Mini stainless Steel bail valve monoblock with reduced bore for Chemical industries, petrochemical industries, hydraulic installation, heating, water distribution and compressed air. 2 FKM O rings on ...

DN: 12 mm

This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging ...

DN: 60 mm

... male thread 2.5" NST-NH. Metal-seated valves will not guarentee total waterproofness. Maximum working pressure: PN16 Valve type: gated valve Operation: by flywheel Material: aluminium ...

DN: 8 mm - 50 mm
Pressure: 138 bar
Temperature: -20 °C - 160 °C

Barstock ball valve monobloc type class 800 in stainless steel A479 316/316L, full bore, F/F ISO 7/1 threading or F/F NPT, Fire safe, Antistatic device.

DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C

One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...

DN: 15 mm - 150 mm
Pressure: 16 bar

Pneumatic compact ball valve is investment casting made wafer type flanged ball valve, has super short monoblock compact structure, design with ISO 5211 platform to make the actuator ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. ...

DN: 50 mm - 600 mm
Pressure: 3 bar - 10 bar
Temperature: -30 °C - 120 °C

V306 Series slurry knife gate valves are monoblock type, bidirectional design with easy replaceable dual side metal reinforced rubber sleeves suitable for handling of abrassive slurries in mining applications, ...

DN: 25 mm - 200 mm
Pressure: 10, 16 bar

VALPRES PN16 CAST IRON GG25/BRASS BALL VALVE WITH DOUBLE ACTING PNEUMATIC ACTUATOR 2 way full bore ball valve with adjustable stem packing - VALPRES brand - Cast Iron GG25 body, nickel plated brass ball ...

DN: 50 mm - 600 mm
Pressure: 6, 8, 3, 4, 10 bar
Temperature: 230, 120, 200, 105 °C

Ductile cast iron with solid monobloc housing find a use where stainless steel shut-off-valves are not necessary available in various seal types areas of application: one part gate valve ...

... spectrum of temperature ranges. The modular monoblock design allows using an arrangement of ball valves and/or needle valves in the same valve body. For applications ...

... shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. Injection ...

... two shut-off valves to separate the process from the instrument side and a vent valve. The modular monoblock design allows using an arrangement of ball valves and/or ...