Pick-and-place machines

The lightline Pickerline is designed to perform key pick & place applications – with all the efficiency and quality you expect from a TLM system from Schubert. Thanks to the preconfigured sub-machines, the picker line is not only very ...

The QM 1500 features an estimated 2,000 to 2,500-pph, with dual-sided liner guide ways for x and Y. The Ball Screw (rather than lead screw) measures 13"×17" working zone and the placement of 0402 standard (overhaul for more diminutive ...

Description: The QM3000 is our largest automatic pick and place machine model with a full vision inspection system. This model has been in the SMTmax line up for over 10 years and our top seller. The 56 feeder capacity and 18"(457mm) ...

The Automatic Pick and Place Machines QM2000, being 38"x40"x21" in dimensions and 180lbs. in weight are equipped with a single Y-direction servo motor instead of two, which consequently prevents any misalignment. These machine make ...

Full automatic Pick and place machine M6 M6 introduction： 　　1、What is M6？M6 is Mounter with 6 heads，mean six-head mounter. 　　2、M6 is a small high-speed placement machine 　　3、M6 can mount the min component 0603,the max IC of SOP24. 　　4、M6 ...

1. What is T8? The homophonic of T8 is Post Hegemony. It is the real" Patch Overlord" in SMT industry in the future. 2. T8 is also the eighth mounting products of TERMWAY with model T8. 3. T8 is a landmark product in the medium-speed ...

T4 Product Explanation: • The one and only high accuracy pick and place apparatus that has typical configuration to mount 0201 parts • The optimal dimension of the T4 is QFP:48 x 48mm • It could mount more than 0.4mm pitch QFP and ...

Specification: 1 Maximum PCB size 400*300mm 2 Z axis maximum moving range 40mm 3 Maximum pick and place speed 6000 cph 4 Average pick and place speed ...

Features: 1. Costeffective Two head pick and place machine, the most suitable for large quantities of resistance and capacitance components and SOP, SOIC, QFP and other mixed production. 2.Unique Y axis belt transmission structure, ...

Specification: 1 Maximum pcb size 420×305mm 2 Z axis maximum moving range 40mm 3 Maximum pick and place speed 11000 cph 4 Average pick and place speed 7000 cph 5 ...

The placeALL®610 has a modular structure and can be used for the assembly of prototypes and small series. With a wide range of handled components, ranging from chips model 01005 up to FP-parts with a pitch of 0.3 mm and BGAs, even complex ...

The placeALL®515 is a modular Pick&Place system and especially useful to build prototypes and small series. It supports a large range of components (chips, FP-components and BGAs), so even the most complex tasks can be handled. An intelligent ...

The universal assemblystation MP904 combines the easy and flexible operation of a manipulator with the high standards of exact placing of Fine-Pitch components. The unrivalled smooth-running guide of the mounting head helps to place ...

The high speed multi-functional placement machine Atom takes Europlacer’s legendary flexibility to new heights, with speeds up to 104,000 CPH and wide device ranges.

Technically speaking, iineo+ is a multi function SMT Pick and Place platform , with the highest level of flexibility and feeder count in the industry. It is widely configurable without the need to compromise on feeder count, placement ...

Our xpii+ pick and place machine is a refreshing new approach to modular pick and place. Incorporating technology from Europlacer’s innovative award winning iineo platform, xpii+ benefits from low maintenance linear motors, high resolution ...

Manual pick & placer M1 compact / standard Technical data Pick & Place system M1-compact contains Table support for PCB’s Two magnetic placeholders for PCB’s Arm support, anti static Built in vacuum pump with air switch. Vacuum ...

TECHNICAL DATA Working area max. 540x480mm Component range from 0201 to 40x80mm min pitch 0,4mm components packgage tapes / sticks / trays / bulk Components centering non-contact alignment Placement rate up to 1200 ...

TECHNICAL DATA working area max. 500x480mm Component range from 0201 to 40x80mm min pitch 0,4mm components packgage tapes / sticks / trays / bulk Components centering non-contact alignment Placement rate up to 1100 ...

The Panasonic NPM-D2 Dual Lane Assembly delivers a seamless and efficient electronics assembly production process, all via a singular-platform. It features a switchable, plug-and-play placement head collection, an adhesive dispense (ADH), ...

The KAYO 1706-3DSG is an automatic SMD report station. Compact it can accommodate 60 tape feeders as well as 8 placement and positioning cameras. The placement accuracy is 0.01 mm for a placement capacity of 13000 components per hour(max). Quick ...

SIPLACE TX: Performance and precision in a tiny footprint The SIPLACE TX placement modules are the new standard in high-volume production. No other placement solution features this level of precision (22 µm at 3 sigma) and speed (up ...

Protoplace S is a semi-automatic pick and place system manufactured by LPKF. This device is designed for the professional assmebling of SMT printed circuit board prototypes. It enables a faster assembly of SMT boards. Users may control ...

Clippy automatically dispenses products thanks to the suction mechanism using a Venturi vacuum generator: coupons and objects are sucked and inserted as products advance. It is available in the pneumatic version or with brushless motor, ...

Manipulator for the production of prototypes and small series. The patent-registered Pick & Place head enables the comfortable handling of SMD-components. The modular-built system can be configurated for every use. It realizes the complete ...

DP2006-2 Features Full automatic with computer vision alignment Windows based control software, friendly user interface X and Y axes precision 0.002" Speed: 2000 parts/hour with SX-2 feeders; 2500 parts/hour with SX-3 or PX feeders Smallest ...

Most flexible pick and place model with Vision offers technologically advanced features and automation with a 13" x 32" (330mm x 813mm) work area, 88 single feeder positions (up to 132 feeder positions using bank feeders), where quick ...

Description Compact 2-axis unit for a faster run of a typical Pick & Place motion. Field of application For use in clean and slightly polluted environment. For a faster and precise shifting or controlled press-in operation of workpieces ...

Description Compact 2-axis unit for a faster, flexible running of any curve on one plane Field of application For use in clean and slightly polluted environment. For a faster and precise shifting or controlled press-in operation ...

Specifications: Vertical stroke: max. 60 mm Horizontal stroke: max. 150 mm Positioning accuracy: +/- 0,02 mm Repeat accuracy: +/- 0,01 mm Handling weight: max. 1,5 kg Pulse rate: max. 100 1/min.