Power: 32, 55 W
Intensity: 1.85, 3 A
Torque: 0.18, 0.11 Nm
... Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible ...
Kählig Antriebstechnik GmbH
Power: 48 W - 73 W
Intensity: 2.84 A - 7.9 A
Torque: 0.3, 0.22, 0.18, 0.14 Nm
... Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible ...
Kählig Antriebstechnik GmbH
Power: 4.7 W - 14.2 W
Torque: 0.015 Nm - 0.04 Nm
Rotational speed: 2,900 rpm - 3,400 rpm
... Brushed DC motor - M36 Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated – Ball bearings – Mounting holes to DIN standard 42016 General ...
Kählig Antriebstechnik GmbH
Power: 30 W
Intensity: 2.9 A
Torque: 0.08 Nm
... • Brushless motor with integrated freely programmable servo controller • High dynamics and efficiency through field-oriented control (FOC) • Logic supply: 15-36 V; • Magnetic singleturn absolute encoder with 4096 I / rev. (12 bit) • ...
Technosoft
Power: 30 W
Intensity: 2.9 A
Torque: 0.08 Nm
... • Brushless motor with embedded drive and motion controller • Brushless motor with integrated freely programmable servo controller • High dynamics and efficiency through field-oriented control (FOC) • ...
Technosoft
Power: 50 W
Intensity: 3.1 A
Torque: 0.16 Nm
... • Brushless motor with integrated freely programmable servo controller • High dynamics and efficiency through field-oriented control (FOC) • Logic supply: 15-36 V; • Magnetic singleturn absolute encoder with 4096 I / rev. (12 bit) • ...
Technosoft
Power: 87, 150, 120 W
Intensity: 0.9 A - 6.6 A
Torque: 0.44, 0.32, 0.16 Nm
... Outer-rotor brushless DC motor available in three stack-lengths The KinetiMax 062 High Power Density (HPD) is an outer-rotor brushless DC motor that comes in frameless stator-rotor ...
Allied Motion The Netherlands
Power: 250, 149, 203 W
Intensity: 1.3 A - 9.5 A
Torque: 0.95, 0.34, 0.68 Nm
... Outer-rotor brushless DC motor available in three stack-lengths The KinetiMax 072 High Power Density (HPD) is an outer-rotor brushless DC motor that comes in frameless stator-rotor ...
Allied Motion The Netherlands
Power: 400, 231, 308 W
Intensity: 1.7 A - 11.9 A
Torque: 1.63, 0.58, 1.13 Nm
... Outer-rotor brushless DC motor available in three stack-lengths The KinetiMax 083 High Power Density (HPD) is an outer-rotor brushless DC motor that comes in frameless stator-rotor ...
Allied Motion The Netherlands
Power: 0.55 kW - 30 kW
Intensity: 2 A - 67.2 A
Torque: 3.5 Nm - 95.5 Nm
... Neri Motori unveils his first high-efficiency IE4 IEC synchronous motor, an innovative solution in terms of energy and cost savings related to the motor lifecycle. Advantages •Cost reduction; •Reduced ...
Intensity: 10.92, 6.97, 5.31 A
Torque: 0.28 Nm
Rotational speed: 7,845, 7,673, 7,844 rpm
... series (cup coreless winding - 2 poles)
Vishan Motor
Intensity: 2.64, 1.34, 0.67 A
Torque: 0.0045 Nm
Rotational speed: 25,858, 26,308, 26,201 rpm
... Configuration / Customization:
- Hall sensor: optional (with or without)
- Performance: customized within the continuous operating range
- Bearing: preloaded ball bearing
- Flange: standard front & back; flange customization
Vishan Motor
Intensity: 1.24, 0.64 A
Torque: 0.0105, 0.01 Nm
Diameter: 10 mm
... >Overview
EC1025 is a compact brushless
DC
motor with a hollow-cup rotor, nominal size Φ10 mm × 25 mm. It is intended for compact precision
drive applications and supports mechanical and
electrical ...
Vishan Motor
Power: 0.17 kW - 0.92 kW
Intensity: 6.56 A - 32.2 A
Torque: 0.3 Nm - 9.51 Nm
... Introduction
HONPINE FM1 frameless Brushless
DC (BLDC)
motors are compact, high-performance industrial actuators provided in multiple size variants. Available sizes cover approximately φ50 mm to φ115 ...
Intensity: 8, 18, 15 A
Torque: 0.8, 2.6, 3.85 Nm
Rotational speed: 1,500, 3,000 rpm
... compact industrial automation
Technical specifications
- Series: BR
- Motor type: Multi-pole brushless motor
- Intended use: Direct drive applications (e.g., AGVs)
- Design
Torque: 0.3 Nm - 78 Nm
Rotational speed: 2,000 rpm - 10,000 rpm
Diameter: 40 mm - 190 mm
... Overview
The XtraforsBL family provides a range of brushless standard
motors characterized by a high torque-to-inertia ratio, enabling very high acceleration. These compact
motors are designed for industrial motion ...
Power: 0.01 kW
Intensity: 0.32 A
Rotational speed: 23,450 rpm - 27,600 rpm
... Overview
BD-1338 is a high-speed brushless
DC
motor designed for compact industrial applications. Data are measured with an aluminium board (57×57×5 t) attached to the
motor flange. Gearhead ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 0.01 W
Intensity: 0.33 A
Torque: 0.00465 Nm
... Product name
BD-1350 —
DC
motor for industrial/precision applications (Manufacturer: CITIZEN CHIBA PRECISION CO.,LTD.)
Overview
The BD-1350 is a compact 2-pole
DC
motor ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 4.1 W - 10.2 W
Intensity: 0.76 A
Torque: 0.0101 Nm - 0.0113 Nm
... stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings last. ・Smooth revolutions Thanks to the ...
CITIZEN CHIBA PRECISION CO., LTD.
Rotational speed: 3,000 rpm
... Tecoo BLDC motor of integrated brushless motors are mechatronics products developed to cooperate with the field of industrial automatic control. ...
Power: 100, 120, 60 W
Intensity: 3.1, 5.2, 6.25 A
Torque: 0.2, 0.32, 0.38 Nm
... Tecoo 57 series brushless DC motors have the advantages of small size, light weight, high efficiency, low energy consumption, etc., and are widely used in various industrial automatic control fields. ...
... Waterproof brushless DC motors have the advantages of fast response, high reliability, good stability, and strong adaptability, and are widely used in industrial control sites with waterproof requirements. ...
Power: 15 W
Intensity: 0.82 A
Torque: 0.002 Nm
... from flange] - N - 4.7 [5] Miscellaneous: Rotor inertia g cm2 - 0.06 Typical noise level [rpm] dB(A) 40 [50,000] Weight of motor g - 13 ...
Boreasa Technologies Co., Ltd
Power: 9 W
Intensity: 0.51 A
Torque: 0.004 Nm
... static) Max. radial load [mm from flange] Rotor inertia - g cm2 - 0.122 Typical noise level [rpm] - dB(A) 30 [25,000] Weight of motor - g - 13 ...
Boreasa Technologies Co., Ltd
Power: 28 W
Intensity: 1.47 A
Torque: 0.011 Nm
... flange] - N - 6 [5] Miscellaneous: - - Rotor inertia - g cm2 - 0.556 Typical noise level [rpm] - dB(A) 30 [25,000] Weight of motor - g 32 ...
Boreasa Technologies Co., Ltd
Power: 0 W - 5,000 W
Intensity: 0.5 A - 80 A
Torque: 0.0001 Nm - 8 Nm
... Brushed DC Motors/tubular DC motors/PMDC motors/DC tubular motor/electric motor/carbon brush DC motor/permannent ...
Zhejiang Dongzheng Motor Co., Ltd.
Power: 47, 52, 58, 60 W
Intensity: 5,800, 3, 2, 1,400 mA
Torque: 0.155, 0.17 Nm
... Compact design brushed DC motor The 52ZY125 model of brushed DC motor can be equipped with Planetary/Spur/Worm/Right Angle gearbox Options Planetary/Spur/Worm/Right Angle gearbox Magnetic ...
Zhejiang Dongzheng Motor Co., Ltd.
Power: 7 W - 13 W
Rotational speed: 1,470 rpm - 3,700 rpm
... Characteristics 50ZY DC BRUSH MOTOR TYPICAL SPECS. · Motor OD: 5 · Voltage: 100V DC · Power: 7 ~ 13W · On-load Speed: 1470 ~ 3700RPM · Without Gearbox · Customized shaft ...
Zhejiang Dongzheng Motor Co., Ltd.
Power: 400 kW - 1,000 kW
Rotational speed: 75 rpm - 1,500 rpm
... Number of poles: 4-80 poles Rated voltage: 6KV, 10K (V) This series of synchronous motors utilizes computer optimization design, new materials, and new processes to meet the relevant requirements of users. They have ...
Jiangsu Dazhong Electric Motor CO., Ltd
Power: 0.55 kW - 375 kW
Operating temperature: -15 °C - 40 °C
... series ultra efficient three-phase variable frequency permanent magnet synchronous motor must be used in conjunction with a vector frequency converter. The rotor of this series of motors adopts a built-in ...
Jiangsu Dazhong Electric Motor CO., Ltd
Power: 0.55 kW - 315 kW
... speed regulation three-phase permanent magnet synchronous motor Frame number: H80-H355 Rated voltage: 220V~1140V. Energy efficiency execution standard: GB 30252-2013 Permanent magnet synchronous motor ...
Jiangsu Dazhong Electric Motor CO., Ltd
Power: 0.72 kW
Torque: 2.3, 4.6 Nm
Rotational speed: 3,000 rpm
... compatible drive pinouts. The motors can be supplied with or without brake. IP 65 as a standard be can be ordered with IP 67. The technology with integrated coupling, enables even more compact installation of servo motors. For ...
Power: 0.75 kW - 45 kW
Rotational speed: 3,000, 1,000, 1,500 rpm
Diameter: 80 mm - 225 mm
... IE5 high-efficiency motors, fully compliant with DIN IEC 60034-30-1 as of 01/2015. Synchronous reluctance motors (SynRM) are optimized for industrial users who prioritize both performance and energy ...
Power: 18.5 kW
Rotational speed: 4,000 rpm
Operating temperature: -20 °C - 80 °C
... Responding to global industry demands, we offer our IE4 and IE5 explosion-protected motors. Provide an outstanding solution compared to conventional systems, delivering ROI in less than two years. As one of the pioneers in the field, ...
Power: 0.55 kW - 7.5 kW
Intensity: 2.2 A - 14.2 A
... is the all new Nastec range of submersible motors for best quality, highest efficiency borehole applications. The technical characteristics and materials adopted in SUMMAG motors represent a nocompromise solution. Everything ...
Power: 50 W
Torque: 0.3 Nm
Rotational speed: 2,800 rpm - 6,400 rpm
... Motor M42: DC motor with permanent magnets 12 and 24 Volt, with starting torque up to 0.3 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output power, are available on ...
OSLV ITALIA
Power: 100 W
Torque: 2, 2.5 Nm
Rotational speed: 1,200 rpm - 7,000 rpm
... Motor M62: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, noload speed and output power, are available ...
OSLV ITALIA
Power: 350, 120 W
Torque: 2.5, 2 Nm
Rotational speed: 5,000 rpm
... Motor M76: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output power , are available ...
OSLV ITALIA
Power: 375 kW - 1,100 kW
Intensity: 220 A
Torque: 3.7 Nm - 23 Nm
... protection level （IP67) High efficiency, ultra-low energy consumption design 30 to 50% energy saving than Asynchronous motor Long life, low noise maintenance-free, high reliability design Low backlash 1-stage, P≤1.5arcmin; ...
WANSHSIN SEIKOU (HUNAN) CO., LTD.
Power: 0.73 kW - 7.12 kW
Intensity: 1.17 A - 13.3 A
Torque: 14 Nm - 816 Nm
... new KTY series of housed synchronous torque motors not only sets a new benchmark with regard to maximum drive system torque and stiffness, but they are also extremely compact. The KTY series is a useful ...
GEORGII KOBOLD
Power: 15 kW - 54 kW
Torque: 320 Nm - 595 Nm
Rotational speed: 400 rpm - 1,000 rpm
... Synchronous permanent magnet motors IP23 eand IP54, IC06,IC416 and IC9W7 ...
COMER S.r.l.
Power: 3 W - 40 W
Rotational speed: 990 rpm - 1,550 rpm
... The Torque Motor Inner- Motor Type: The voltage regulator is stored inside the terminal box, there it can control the motor speed easily with the speed controller it is attached to. No need to attach ...
Torque: 140 Nm - 390 Nm
Rotational speed: 2,000 rpm
... SERVO MOTORS • Up to 30% increased power density • Up to 20% reduced dimensions • Sophisticated design, intended for extreme torque stability and precision Sophisticated design in ultra compact dimensions. This series of servomotors ...
Lafert
Power: 19.5 kW - 41.5 kW
... Permanent magnets brushless motors with high power-to-weight ratio With its highest power-to-weight ratio and torque constant, specially adapted to robots, mobile or borne applications with high power, the 136 OEP motors ...
ALXION
Power: 5,000 kW - 42,000 kW
... of explosion-proof motors - dependent on the hazard potential (zone 1 and zone 2). At present we provide the ignition protection classes Increased Safety e and n (non sparking)(zone 2) for our low and medium capacity motors; ...
VEM motors
Power: 2.85 W - 10.8 W
Intensity: 87.7 mA - 2,140 mA
Torque: 0.0039 Nm - 0.0531 Nm
... It is no exaggeration to say that DC motors are used in every corner of the environment surrounding our lives. It is widely used in various forms. For example, in terms of living, air conditioning equipment such as air ...
Citizen Micro Co., Ltd.
the best suppliers