Threaded valves

DN: 20 mm - 25 mm
Pressure: 13 bar
Temperature: -30 °C - 80 °C

... quickl valve can be installed in the piping and some important position such as outlet of compressor and upstream of pneumatic tools .Good for the separation ,adjustment and maintenance . Quick install . Provide ...

Pressure: 20 bar - 200 bar

Volumetric Metering Valves AXDV-C Ultimate process reliability at lowest dosage volumes – made possible by the new ABNOX Valve. It allows accurate placing of minute quantities of your complex lubricant ...

DN: 6 mm - 100 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

This series consists of two and three way, threaded-end shut-off valves, with the body in AISI 316 and a floating ball, manufactured in accordance with the most severe product standards. They are available ...

DN: 0.25 in
Pressure: 414 bar
Temperature: -40 °C - 93 °C

316 SS, BF Series Ball Valve, CNG fast-fill, PEEK Seats, 1/4 Female NPT, 6000psig(414bar), -40°F to 200°F(-40°C to 93°C), 0.75 Cv, 3-way, 90° actuation, Low-temperature Service Body Material316 Stainless Steel Port ...

DN: 20 mm - 63 mm
Pressure: 10 bar

... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness.

DN: 6.35 mm - 19.05 mm
Pressure: 350 bar
Temperature: -20 °C - 80 °C

... Equipped with a valve body with BSPP-GAS threaded ports, the VBCL overcenter valves are designed to be installed in-line within the hydraulic system in compliance with the spaces available ...

... patent-pending technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve ...

Pressure: 280 bar
Flow rate: 20 l/min

... the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages Operation Counterbalance Valve with pilot assist are meant to control ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...

DN: 0.25 in - 1.102 in
Pressure: -800 mbar - 2,000 mbar

... pressurization of large volumes of liquid for your microfluidic application. This cap is compatible with any lab bottle with a standard thread GL-45. It is compatible with Fluigent’s pressure controllers: the MFCS™ series ...

DN: 15 mm - 200 mm
Pressure: 2.5 MPa - 4 MPa

Steam Pressure Reducing Valve Body, Bonnet: Ductile Iron, WCB Disc: 2Cr13 Seat: SS410, 2Cr13 Plug: SS410, 2Cr13 Stem: 2Cr13, SS410 Diaphragm: 321 S.S. Adjustable Spring: UNS G92600, 1Cr18Ni9Ti Flow ...

DN: 6.35 mm - 50.8 mm

... piece, full port ball valve with NPT ends and an ISO 5211 compliant direct mount actuation pad. The 2WE20 is rated to 2000 WOG in sizes ranging from ¼” to 1” while the 5WE20 is rated to 1500 WOG in sizes ranging from ...

DN: 0.375, 0.5, 0.18, 0.25, 0.75 in
Pressure: 0 psi - 20,000 psi
Temperature: -26 °C - 204 °C

NPT Connections with MAWP up to 15,000 PSI (1034 bar) Flow Pattern: 2-Way, 3-Way Switching, 3-Way Diverting Features Bidirectional trunnion style for optimal performance Three standard mounting options Options ...

DN: 10 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 150 °C

Stainless steel valve FPM shaft “o-ring” PTFE+15%GF ball seats BSP threaded end connections (SW and BW on request) NP63 Working pressure: 16 Bar* Fluid temperature: -20°C +150°C* Actuator temperature: ...

DN: 15 mm - 65 mm
Temperature: 260 °C

... engineering design Self relieving seat technology Patented stem seal technology ISO compliant bonnet Multiple end connections (Threaded, socket weld, butt weld, custom) High quality Benefits Very long service ...

DN: 15 mm - 100 mm
Pressure: 40, 25 bar
Temperature: -60 °C - 80 °C

Body: carbon steel 20 (1.1151) Stem: stainless steel (AISI 420) Ball: stainless steel DN 15-32: AISI 420; DN 40-65: AISI 304; DN 80-100: AISI 409 Stem sealing: FVMQ Stem sealing/washer: PTFE Ball sealing: ...

DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C

PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three ...

Pressure: 28 bar

The main functions of the Shut-Off Valve are to start or stop fluid within the particular circuit it is installed. Applications The Henry Technologies’ range of Globe and Angle Shut-Off Valves is ...

DN: 0.125 in
Pressure: 0 bar - 400 bar

Mini Needle Valve, Tradinco T1700 Special instrumentation-needle valve for vacuum and pneumatic pressures up to 400 bar. Excellent feel and low torque allows high accurate control of vacuum or pressure. Low ...

Pressure: 200 bar
Temperature: -20 °C - 65 °C

Key advantages - High pressure brass cylinder valve for Inert, Inert mixtures and flammable gas service - Permanent gas tight seal - π marking according TPED directive - Tested according EN ISO 10297 and CGA V9 standards - ...

DN: 8 mm - 80 mm
Pressure: 16, 25, 40, 64 bar

AISI 316 2-PCS BALL VALVE WITH DIRECT ISO PAD AND DIN SHAFT 2 way full bore Stainless Steel ball valve ATEX II2 G/D CT3 - PN64 - Body, ball and stem in AISI 316 - TFM1600 seats - FKM o-ring - Threaded ...

DN: 40 mm - 200 mm
Pressure: 20 psi - 300 psi

... installations. The DV-5a Valves are offered with the DV-5a Valve and separately ordered semi-assembled trim shown in Figures 7, 8, and 9, or, for ease of installation, with the DV-5a Valve ...

DN: 0.25 in - 3 in
Pressure: 0 bar - 40 bar

Electro-pneumatic 2-3-ways NC-NO-Universal Port: 1/4" to 3" and with flanges PN16/PN40 Pressure: 0 to 40 bar

DN: 8 mm - 47 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 120 °C

DESCRIPTION • 2-way ball valve BSP female threated • Body and Ball Brass MS58 chromium plated • Seats PTFE • O-rings Viton® • Lever aluminium epoxy coated • Working pressure maximum 40 Barg up to 95° C., 25 Barg ...

... machined, and a flat valve face on the upstream and downstream sides of the valve, valves have threaded inserts at both sides of the valve body. This ...