DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
... industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded acc. to DIN-259. ...
ABV
DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C
... shut-off valve is arrested even without a shift lever. Various additional flanges and parts permit direct fixing to an oil tank (T-flange) or incorporation in a pipe ( threaded bush). Thanks to the lateral recesses ...
DN: 0.5 in - 4 in
Pressure: 16, 25, 40 bar
... STANDARDS OF MANUFACTURE ISO228-1 GAS THREADED MATERIALS BODY DN½”÷1” – PRESSED BRASS EN 12165 DN1”¼÷4” – BRONZE EN 1982 DIAPHRAGM NBR EN 681-1 SEAT AISI303 STAINLESS STEEL EN 10088-1 GASKETS NBR EN 681-1 CERTIFIATES D.M. ...
ACMO S.p.A.
DN: 0.25, 0.375, 0.5, 0.75, 1 in
Pressure: 0 bar - 400 bar
Temperature: 0 °C - 240 °C
... Indumart Needle Valves are high pressure isolation valves suitable for shutting-off the impulse line and for mounting to pressure instruments. They are mostly used in oil, gas, Chemical, petrochemical, power génération ...
DN: 0.25 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F
... pressure 1/4"~2" 1000 psi W.O.G; 2-1/2"~3" 800 psi W.O.G; 4" 600 psi Temperature range -20° to 450°F End types threaded with Locking device Locking lever handle ...
BUENO TECHNOLOGY
DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F
... Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite ...
LOCKWOOD
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -10 °C - 130 °C
... Brass butterfly valve full bore, F/F threaded with throttling. ...
BONOMI GMBH
DN: 0.5 in - 3 in
Pressure: 150 psi
... SIZE: 1/2＂～3＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) WORKING PRESSURE: 150PSI ...
Xiamen Keheng Plastic Co., Ltd.
DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar
... Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating temperature ...
Evoguard GmbH
DN: 1 in
... Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red) ...
Unidelta S.p.A.
DN: 0.5 in
Pressure: 25 bar
Temperature: 70 °C
... Pressure gauge push-button valves with DVGW approval, PN 25 / gas max. PN 4 bar SKU MXT-341MSPB Body material Brass-nickel-plated ...
DN: 1, 1.25 in
... Our Eco Line gate valve is our gate valve in composite material with high strength and metal-like properties. The material technology and product design give the gate valve extremely long life and safe ...
DN: 15 mm - 250 mm
Pressure: 16 bar
Temperature: -46, -196 °C
... The medium temperature of the cryogenic ball valve is very low, which is used for the control system of cryogenic medium. The valve produced by a special low-temperature process to ensure the low-temperature performance ...
pneumaticairactuator.com
DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° C and 16 bar working pressure. ...
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -10 °C - 130 °C
... balancing, Metering station Connection - Olive and Nut, ISO 228/1, ISO 7/1 DZR brass metering station Threaded M/F ISO 7/1 Rp (F side threaded ISO 228/1 on DN15 and DN20) Olive & nut kit (O/N) for European copper ...
VIR
DN: 0.5 in - 24 in
Pressure: 100 bar - 420 bar
... Pressure Seal Gate Valve Provider: Pressure Seal Bonnet Gate Valves, API 600, API 602, ASME B16.34, DIN 3202, 1/2-24 Inch, 600-2500 LB, PN100-PN420, Cast or Forged Steel. Med Pressure Seal Gate valves ...
China MED Valve Co., Ltd.
DN: 15 mm - 200 mm
Pressure: 10 bar - 40 bar
... food industry Execution with 3 seats up to DN 1"1/2 / with 4 seats from DN 2" Body material from bar (A105 or AISI 316) Threaded body-cover Flanges drilled acc.to DIN - UNI - ANSI norms Possibility of equipment with handlever, manual ...
THERMOMESS S.r.l.
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
... The range of applications for dosing valves are mainly in the extrusion area. With this specific valve different additives and auxiliary materials can be purposefully inoculated into the plastic at a defined place. Both ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 100 °C
... The Siral 3VT- 2000 series is an array of ball valves that can deliver pressure of up to 16 bar in thermal range of up to 100 °C. These ball valves have 3 "T" female threads that measures 1/4" up to 2". They integrate ...
SIRAL
DN: 25, 32, 40, 50 mm
Pressure: 60 bar
Temperature: 70 °C
... gaskets O-ring - “DRY THREAD” - replaceable under pressure. Stainless steel spindle with rolled thread and bearing. Total sufrace rubberizing. Gate valve with full bore. All parts are protected against corrosion. ...
VARIMEX-VALVES Poland Sp.z.o.o.
DN: 15 mm - 100 mm
Pressure: 6, 10 bar
Temperature: -40 °C - 60 °C
... materials Compact structure, light installation, high-cost performance. Please close the valve before installation. Using a rubber gasket instead of an inner plug, the valve torque and tightness can be adjusted by ...
Ningbo Baodi Plastic Valve Co., Ltd.
DN: 1.5, 2, 2.5, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h
... This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, in the “close” ...
A.G.P. VALVULAS 10 SL
Pressure: 0.1 bar - 6 bar
Temperature: -30 °C - 100 °C
... . Ø available: ¼’’ and ½’’ Thread connection ISO 228-1 Metal parts AISI 304L Pivot lock PTFE O-ring NBR External surface finish Electropolished Upper level valve. Upper level valve drain ...
DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C
... proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: - 0 - 10 volt voltage: - 24V DC (+/- 10%) actuating ...
NieRuf Gmbh
the best suppliers