Flow: 0 m³/h - 13.2 m³/h
Pressure: 0 bar - 8 bar
Head: 2 m - 8 m
... operated diaphragm pump is an environmentally friendly alternative to the traditional air-operated diaphragm pump. It is designed for gentle pumping of the most aggressive media, including those containing abrasive particles. This ...
Flow: 24 l/min - 125 l/min
... The Tapflo drum pump is ideal for mobile use. It is fitted with a drum tube in polypropylene (PP) or PTFE and a handle in stainless steel AISI 316L. The drum tube is delivered in any length up to 2 m. Tapflo diaphragm drum pump ...
Flow: 90 m³/h - 8,000 m³/h
Head: 10 m - 50 m
Power: 2.5 ch - 13 ch
... building material and other industries. They can be used as Circulating Pump of FGD Absorbing Tower, Limestone Slurry Pump, Gypsum Slurry Pump, Waste Water Pump and Leakaged Slurry Pump. The ...
Flow: 55, 50 l/min
Head: 6.9, 7.8 m
Power: 0.48 kW
... pump is a single-phase portable self-priming residue drainage pump incorporating a submersible motor. The suction attachment, supplied as standard, makes the pump drain water down to floor level. The ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 1.1, 2.4, 3 m³/min
Head: 0 mm - 60 mm
Power: 0.4 kW - 22 kW
... is a basic heavy-duty, submersible sewage and wastewater pumps providing excellent solids matter passing capability with reliable operation. They offer a wide lineup of discharge bores ranging from 50 - 300 mm and motor ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 4 m³/min
Head: 0 m - 35 m
Power: 1.5 kW - 15 kW
... submersible sewage and wastewater pumps that is designed with a shrouded single/two-channel impeller and wide passages of over 3 inches (76.2 mm) in diameter to minimize trouble due to clogged solids. In addition, as ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar
... The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed air connection ...
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
... Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades of excellent service. Applications - ...
Emile Egger & Cie SA
Flow: 180 l/s
Pressure: 16 bar
Head: 100 m
... without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge with a high content of fibers - All viscous media - Suspensions with a high content of ...
Emile Egger & Cie SA
Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m
... The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications - Demanding fluids in the chemical ...
Emile Egger & Cie SA
Flow: 0 l/h - 500 l/h
Pressure: 0 bar - 2 bar
Power: 0.37 kW
... solid-laden, high S.G. media and where the process line requires good suction lift and may run dry intermittently. Typically, ROLLIT pumps would be installed where there is a need for higher flow, medium pressure requirements.The rollit ...
Verder Liquids
Flow: 0 l/h - 2,200 l/h
Pressure: 0 bar - 2 bar
Power: 0.37 kW
... solid-laden, high S.G. media and where the process line requires good suction lift and may run dry intermittently. Typically, ROLLIT pumps would be installed where there is a need for higher flow, medium pressure requirements.The rollit ...
Verder Liquids
Flow: 0 l/h - 6,000 l/h
Pressure: 0 bar - 2 bar
Power: 1.5 kW
... solid-laden, high S.G. media and where the process line requires good suction lift and may run dry intermittently. Typically, ROLLIT pumps would be installed where there is a need for higher flow, medium pressure requirements.The rollit ...
Verder Liquids
Flow: 0 m³/h - 400,000 m³/h
... >
- LFP6012-1 (Brushless DC centrifugal pump)
- LFP6012-6 (Brushless DC centrifugal pump)
- LFP5024-2 (Brushless DC centrifugal pump)
- LFP5012-2 (Brushless DC centrifugal pump)
Images ...
ZHEJIANG LEFOO CONTROLS CO., LTD
... brushless-dc-centrifugal- pumps-6.webp; lfp5012-4-brushless-dc-centrifugal- pumps-3.webp; lfp5012-4-brushless-dc-centrifugal- pumps-4.webp; lfp5012-4-brushless-dc-centrifugal- pumps-5.webp; ...
ZHEJIANG LEFOO CONTROLS CO., LTD
... brushless-dc-centrifugal- pumps-lfp5012-2.webp; brushless-dc-centrifugal- pumps-lfp5012-2-5.webp; brushless-dc-centrifugal- pumps-lfp5012-2-6.webp; brushless-dc-centrifugal- pumps-lfp5012-2-3.webp; ...
ZHEJIANG LEFOO CONTROLS CO., LTD
Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel material for ...
... *CV-series are designed for solid handling submersible pumps, enclosed with vortex impeller with spherical clearance 35mm and 56 mm are ideal for pumping sewage, wastewater and fibrous solids. *Motors are protected to ...
... Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor is made of metal with circular cross section, while the stator is of elastic material ...
Flow: 0 m³/h - 16.8 m³/h
Head: 0 m - 24 m
Power: 1.1 kW - 2.2 kW
Pumps with three channel impeller and innovative grinder system particularly suitable for agricultural purposes (slaughterhouses, stables), but which are also used in residential / civil sewages. The grinder shreds the solids in suspension ...
Flow: 0 l/min - 810 l/min
Head: 0 m - 12 m
Power: 0.37 kW - 2.2 kW
Pumps with VORTEX impeller suitable for domestic and industrial use to dispose of clean, slightly dirty water, sewages or similar liquids. Thanks to their robustness and reliability are the best choice in construction/building field.
Flow: 0 l/min - 900 l/min
Head: 0 m - 17 m
Power: 0.37 kW - 2.2 kW
Pumps with double-channel opened impeller suitable for handcraft and industrial use to dispose of clean or slightly dirty water or similar liquids. The strong cast iron strainer on the bottom inhibits to solid parts which may damage the ...
Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m
... The pump housing can be open in few minutes without tools, for inspection of the impeller and the pumping chamber 38 L/min @ 140 Bar 30 L/min @ 140 Bar 20 L/min @ 140 Bar • Can be operated by small power packs or by ...
Flow: 60 l/min - 8,000 l/min
Pressure: 17 bar - 350 bar
Head: 39 m
... • Pump everything! The shearing impeller can shred and pump branches, algae, rags, ropes, bags and solid objects with dimensions up to 55 mm • High performance, weight/size/power ratio unmatched by other types ...
Flow: 66 m³/h - 144 m³/h
Head: 196, 240, 218, 245 m
Power: 37, 45, 55 kW
... Overview
Vertical lineshaft
pumps 6" and 8" in AISI 316 cast stainless steel with flanged drive heads for IEC standard motors.
Range
Extreme
Applications
- Offshore platform
- Oil
Rovatti Pompe
Flow: 85, 200, 130 m³/h
Head: 16.5, 18, 20.5 m
Power: 3.2, 9.5, 5.5 kW
... Electric submersible wastewater pumps with vortex impeller. Designed for free-standing wet installation (with rigid or flexible pipeline connection) and for wet installation on automatic coupling foot. Suitable for handling ...
Rovatti Pompe
Flow: 475 m³/h
Head: 25 m
Power: 18.5 kW
... Overview
Electric submersible
pump
for wastewater equipped with a double-channel impeller. Suitable for free-standing wet installation (rigid or flexible pipeline connection) and for wet installation on an automatic ...
Rovatti Pompe
Flow: 50 l/s
Head: 40 m
Power: 7 kW
... D ELECTRIC SUBMERSIBLE PUMPS FOR DRAINAGE Electric submersible pumps designed for raising drainage water. Thanks to their amenity and sturdiness they are used for draining out excavations even under the harshest working ...
Caprari
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
Input diameter: 0.25 in - 0.5 in
... Variable speed peristaltic pump designed to handle liquids of low to high viscosity. Ideal for laboratory, processing, and OEM applications. Design Features Economical Compact design for small ...
Aalborg Instruments
Flow: 30 us gal/min
... Up until now, users of scale removal chemicals have had to rely on rudimentary re-circulating pump systems that are awkward to use and require constant attention when operating. There has been a great need for a system that is specifically ...
Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar
... Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign materials. The low-pulsation ...
WANGEN PUMPS
Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m
... High efficiency IE3 electric pump VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters ...
Zenit
Flow: 0.0039 l/min - 3 l/min
Pressure: 5 psi - 50 psi
Fluid temperature: 60, 49 °C
... is maintained over the entire flow range of the pump. Standard Bellows Metering Pumps are designed to displace both corrosive and non-corrosive fluids. Accurate to ± 0.5% from stroke to stroke, when pump ...
Flow: 0 us gal/min - 5,000 us gal/min
... The tens of thousands of pumps distributed by Smith & Loveless already, who are responsible for conveying wastewater around the world, providing reliable service every single time. The design is a bold type one, retaining ...
Smith & Loveless Inc.
Flow: 44 l/min - 55 l/min
Head: 6, 7, 8, 9 m
Power: 42 kW - 78 kW
... Circulating pumps are referred to as circulation pumps, which are designed to generate a forced fluid circulation in a closed system. Examples that apply circulation system for water filter machine or coffee machine. ...
LEFOO Group
Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m
... Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution 150 lbs ANSI B 16.5 available Outstanding ...
Johnson Pump
Flow: 0.08 l/h - 3.6 l/h
Pressure: 2 bar
Power: 5 W - 12 W
... Compact, low-flow dosing pump for continuous dosing at low speed or intermittent dosing. Its design has been thought to facilitate the change of hoses, without tools. Ease of use The transparent hinged cover allows the wear condition ...
Siebec
Flow: 70 l/min
Pressure: 8 bar
Head: 7.5, 4.5 m
... Diaphragm pump in aluminum series AAB-12 with membranes in EPDM, balls and seats in acetal FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE | WINDSHIELD FLUID | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK ...
Flow: 200 m³/h - 5,500 m³/h
Head: 5 m - 70 m
... The Fairbanks Nijhuis solids handling pumps have an international reputation for their solid handling capacity combined with high efficiencies. These pumps are available with a single channel impeller as well as a ...
Fairbanks Nijhuis
Flow: 0 us gal/min - 300 us gal/min
Pressure: 7 bar
Head: 19.8 m
... air-powered dewatering trash pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1½" (40 mm). This high-capacity, low-head centrifugal pump provides one of the highest flow rates of ...
WARREN RUPP
Flow: 2.2 us gal/min - 22.7 us gal/min
Pressure: 20 psi - 60 psi
... FEATURES Manual regulator provided with deep well packages. Corrosion and abrasion resistant. Shipping and carrying weight of the Quick-Set Jet is less than most conventional brands because heavy bolton or cast-on ...
RED JACKET
Flow: 20,000 us gal/min
Head: 250'00"
... Horizontal and Vertical Solids-Handling Sewage Treatment Vertical Design with Elevated Driver Coupled Directly to the Pump Design Recommended where Floor Space is Not Available and Flooding Chances are Low Vertical Design ...
Flow: 4.9 l/h - 76 l/h
Pressure: 1.7 bar - 20.7 bar
... Safety Comes Standard with Every Pump Designed for environments that demand additional safety features, the E7 Explosion-proof chemical metering pump delivers the protection your chemical application requires. Built ...
LMI Milton Roy
Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m
... fertilizer processing, biodiesel, general industry, air treatment, waste water treatment and desalination. Reliability: The CCL offers a wide range of shaft sealing and the pumps are also equipped with reliable bearing ...
CDR Pompe
Flow: 0 us gal/h - 39 us gal/h
Pressure: 0 bar - 207 bar
Power: 0 kW - 0.18 kW
... Our time proven PULSA Series® 680 is a leak-free, hydraulically balanced diaphragm metering pump. It is engineered for precise dosing and long-term dependability to deliver superior value. Our flat diaphragm or unique HYDRAcone® head ...
Pulsafeeder
Flow: 3 m³/h
Pressure: 0 bar - 20 bar
Power: 4 kW
... ceramic piston pump is often used for pumping thick slurry, especially for stone wastewater, kaolin slurry, ceramic wastewater and mining thick slurry. This slurry pumping transfer machine also could ...
Fujian Nanxing Environmental Technology Co.,Ltd
Flow: 5,000 m³/h
Head: 65 m
Power: 1,000,000 W
... The giant for corrosive and abrasive service environments NPC Mammut centrifugal chemical pump For pumping tasks beyond the norm: the NPC Mammut centrifugal pump is the problem solver for extreme tasks. Here, MUNSCH ...
MUNSCH Chemie-Pumpen GmbH
Flow: 2.4 m³/h - 6.5 m³/h
Head: 0 m - 7 m
Power: 0.32, 0.2 kW
... run dry, the pump is automatically vented via an opening in the discharge elbow. The U3 K(S) must not be used for pumping wastewater containing faeces or wastewater from urinal systems If submersible ...
JUNG PUMPEN
Flow: 1.2 m³/h - 9 m³/h
Head: 1.5 m - 7.6 m
Power: 0.25 kW
... submersible pump with mechanical seal in oil bath and oversized oil chamber. Possibility of fixed or mobile installation and suitable for domestic applications and large industrial drainage installations. AISI 304 stainless steel submersible ...
EBARA PUMPS EUROPE
Flow: 0.02 us gal/min - 450 us gal/min
Pressure: 0 psi - 2,100 psi
Fluid temperature: 260, 350, 210, 185 °F
... For nearly 50 years, versatile L-Frame pumps have stood the test of time meeting thousands of application challenges with performance-enhancing, cost-saving features. Features Low total cost of ownership Simple pin-type universal ...
Moyno
Flow: 12 m³/h - 60 m³/h
Head: 20 m
Power: 11 kW
... hundreds of installations. Materials selected for TF-TOP DIMACO pumps are compatible with hydrocarbons, solvents and corrosive supernatants; TF-BOTTOM is suitable for leachate and DNAPL. Pumps can be fitted with customized ...
Flow: 0 m³/h - 3,600 m³/h
Head: 100 m
Power: 1.3 kW - 310 kW
... submersible pumps and in dry installations
Suitable media
- Sewage
- Raw water
- Cooling water
- Settlements
- Rainwater
- Industrial
Proffico sp. z o.o.
... Podale Pumps can provide reasonable and cost-effective fluid transfer solutions according to the application and customer needs. Applications ●Industrial/Municipal Wastewater Treatment ●Ceramic Coatings/Glazes ●Chemical/Petrochemical ●Biotechnology ...
Guangzhou Huayue Automation Equipment Co., Ltd
Flow: 10 m³/h - 50 m³/h
Pressure: 950 bar
... conditions - Operates even with temporary absence of fluid - Effective suction thanks to vacuum - Multi-purpose for all types of fluids - Works like a vacuum truck but in a compact format - Made in Italy - ...
Flow: 10 m³/h - 100 m³/h
Head: 7 m - 40 m
Power: 2.2, 3, 4, 5.5 kW
... material application, etc. of submersible electric pumps for sewage and sand discharge. It has more than 20 patent technologies, applied many latest research results, and formed a mature motor and electric pump manufacturing ...
Shoutai Industry
the best suppliers