The milling tool SWINGCUT 1000 can be used for the economical deburring and fettling of metallic as well as nonmetallic parts. The spindle is freely compliable in two directions. The pressure against the part edge can be set from the robot program.
Article-No.
3120.211
Power
1.3 kW (1.74 hp)
Idling speed
25'000 rpm
Rated speed
20'000 rpm
Compliance radial in two directions
± 3.8° / ± 15 mm (at collet)
Compliance toque
16.6 Nm (12.2 ft lbs) bei 6 bar (87 psi)
Compliance force
72 N (16.2 lbs) at 6 bar (87 psi) (at collet)
Feed forward rate
10 - 300 mm/sec.
Air consumption
28 l/s (59.3 cfm)
Collet
Ø 8 mm, 5/16
Weight
7.6 kg (16.8 lb)