Stainless steel indexing plunger K1502 series

Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. Some examples of this are for length, height and position locking in machine, furniture and special vehicle construction. Indexing plungers with remote actuation are used where inaccessible assembly spaces are making it difficult to operate, or where remote actuation is required for ergonomic or safety reasons. The indexing plunger is connected to the operator side by a Bowden cable. The combination of indexing plunger and actuating element forms a complete system which can be used for many types of application. As an alternative to the actuating element, the supplied screw nipple (Ø5 x 7 mm) can be used to integrate an individual actuating element into the system. The Bowden cable is available in various lengths. To ensure an exact fit in the application concerned, the Bowden cable can be shortened as required when installing. Corrosion protection is provided by selecting a suitable material for coating application. The wire cable or cable casing can be replaced easily if required.Material:Indexing plunger: Threaded sleeve stainless steel 1.4305. Indexing pin stainless steel 1.4034. Actuating element stainless steel 1.4305. Mushroom grip thermoplastic Wire cable stainless steel 1.4401. Steel wire casing with plastic casing inside and out. Brass end sleeves, adjusting screws and screw nipples. Version:Indexing pin, hardened, ground and bright. Bowden cable casing, black. Mushroom grip, thermoplastic dark grey.