Steel workbench E-ATEB-1500-500H.11

for workshopswith shelvesmetal

Product overview

• Worktop with high-pressure laminate (HPL) surface, thickness 30 mm.
• Top layer: 0.8 mm light-grey HPL (according to DIN EN 438). Splash-proof and dirt-resistant. High abrasion resistance, scratch and impact resistant. Resistant to weak acids and alkalis and common household chemicals and solvents. Surface normally flammable (B2) according to DIN 4102. Core: particleboard to EN309/EN312 (emission class E1). Underside with balancing layer. All-around light-grey antistatic ABS edge.
• System substructure, W 1500 x D 500 x H 630–980 mm.
• 4-leg frame with two pairs of frame feet in profile steel tube (45 x 45 x 3 mm) including central depth braces. Feet bottom with end-piece including level adjustment and anti-slip studs for secure support.
• Top of frame feet with integrated height adjustment using aluminium profile (40 x 40 mm) with profile groove for stepless height setting.
• Cross braces of profile steel tube (35 x 35 x 2 mm) under the worktop (front, rear) and depth braces of angle iron (40 x 35 x 2 mm) with mounting adapter (left, right).
• Frame feet prepared for fitting/retrofit of castor set.
• Note: This base table can be combined with an extension table of same or smaller depth and/or a corner table.

Equipment (shelf / system supports)

• Assembly kit with 2 system supports: aluminium profile 40 x 40 mm, mounting adapter for attachment to frame foot. Profile groove on all 4 sides for versatile use. System supports height 1400 mm (usable height depends on base table setting). Load capacity max. 100 kg.
• Shelf dimensions D 310 x H 75 mm.
• Shelf made of melamine resin coated board (22 mm, light grey) with ABS edge, support beam of profile steel tube (40 x 40 x 2 mm) and 2 outriggers of profile steel tube (50 x 20 x 2 mm). Mounted to system supports from front or rear; installation height infinitely adjustable. Load capacity max. 30 kg.
• Shelf can be mounted in front of or behind a perforated panel; with additional support rail it can serve as a rear stop.
• Note: Additional accessories can be attached to the system supports.

Technical data
Width: 1500 mm
Depth: 500 mm
Height adjustable: from 650 mm to 1000 mm
Top type: high-pressure laminate (HPL) worktop
Top thickness: 30 mm
Static surface load: 450 kg
System supports height: 1400 mm (usable height depends on worktop height)
System supports load capacity: max. 100 kg
Shelf dimensions: D 310 x H 75 mm
Shelf load capacity: max. 30 kg