Axial fan HC serieswall-mountedextractor230VAC
Add to favorites
Compare this product
Characteristics
- Installation
- wall-mounted
- Configuration
- axial
- Function
- extractor
- Supply voltage
- 230VAC, 400 VAC
- Drive mechanism
- with asynchronous motor
- Material
- plastic, fiberglass
- Other characteristics
- anti-corrosion, IP55, IP54
- Air flow
Max.: 54,000 m³/h
(1,906,992.003 ft³/h)Min.: 1,300 m³/h
(45,909.067 ft³/h)- Rotational speed
Max.: 2,750 rpm
(17,279 rad.min-1)Min.: 890 rpm
(5,592 rad.min-1)- Noise level
Max.: 88 dB
Min.: 51 dB
Description
Wall mounted axial fans with fiberglass reinforced plastic propeller.
Fan:
• Steel sheet support frame.
• Fibreglass reinforced polyamide-6 impeller.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Models 71, 80, 90 and 100: The protection grid is supplied as an accessory.
• Airflow direction from motor to impeller.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings. IP55 protection. Except single-phase models from size 45 to size 63, with IP54 protection. 1 or 2 speeds depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +60 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Motor, impeller and grille assembly (F version), except models 71, 80, 90 and 100, which are supplied without a grille.
• Motor, impeller assembly (version G).
• Airflow direction from impeller to motor.
• Special windings for different voltages.
Catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.