Axial fan HGT/CL serieswall-mountedventilation230VAC
Add to favorites
Compare this product
Characteristics
- Configuration
- axial
- Type
- wall-mounted
- Function
- ventilation
- Supply voltage
- 230VAC, 400VAC
- Drive mechanism
- electrically-powered
- Material
- aluminum
- Other characteristics
- reversible, IP55, corrosion-resistant, ATEX
- Air flow
Min.: 51,300 m³/h
(1,811,642.403 ft³/h)Max.: 207,500 m³/h
(7,327,793.345 ft³/h)- Rotational speed
Min.: 705 rpm
(4,430 rad.min-1)Max.: 1,480 rpm
(9,299 rad.min-1)- Noise level
Min.: 70 dB
Max.: 99 dB
Description
Large diameter tubular axial fans with direct drive motors
Tubular axial fans equipped with 6 or 9 blade aluminum propellers with various angles of inclination.
Fan:
• Airflow direction from motor to impeller.
• Impellers made of cast aluminium with 6 or 9 blades with adjustable angle of inclination.
• Tubular casing in sheet steel.
• The long casing version is equipped with an inspection hatch.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Airflow direction from impeller to motor.
• 100% reversible impellers.
• Special windings for different voltages.
• ATEX certified Category 2.
• 2 speed motors.
• The support feet are supplied as an accessory.
Catalogs
No catalogs are available for this product.
See all of SODECA‘s catalogsOther SODECA products
Axial Fans
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.