Fandis fans
Air flow: 13,500 m³/h
... downrods and blades of different sizes are available, making it possible to adapt ceiling fan ICF to almost all applications. Ceiling fan ICF pushes the warm air from the ceiling and thus lowers the ...
Air flow: 19,300 m³/h
Application Ceiling fans are used primarily to equalize the temperature in rooms with high ceilings. Ceiling fan ICFX is designed for demanding environments, for example industries or workshops, where ...
Air flow: 0 m³/h - 18,000 m³/h
Diameter: 18 in
... each fan component – the casing, the impeller and motor – enables us to create fans that perfectly meet the requirements of high performances and low power consumptions.The wide range of different versions ...
Nicotra Gebhardt
Coral
Air flow: 100 m³/h - 13,000 m³/h
Metal sheet steel fan complete with inlet and outlet flanges
EXHAUST FILTER/fan module according to NFX 15-211 norm ( Filter not included )
The industrial fan Recube plug fan for extraction is a fan able to put the user in depression, so as to realize vacuum or depression in test chambers or extract air at high pressures ...
Rimor
... solvent or humidity measurement systems inside the system. The Recube plug fan is a circuit of soundproof and insulated industrial fans with inverters. The Recube plug fan by Rimor ...
Rimor
... the Recube fan fan double fan it is possible to disassemble one unit without the other one stopping allowing maintenance during the operation of the other industrial fan. The ...
Rimor
Air flow: 10,000 m³/h - 50,000 m³/h
The Rare Blade Cell/Cabinet Fans are manufactured with the double-walled panels. The special chassis with 150 mm height are used under the units. The fan and the motor system are connected to the device ...
POINT KLIMA
Air flow: 2,000 m³/h - 20,000 m³/h
Cell/Cabinet type Fans and Ventilators are produced in series in the desired suction and blowing directions in the capacity range of 1.000-75.000 m3 / h. The cells are made of the stone wool insulated, double walled and ...
POINT KLIMA
In case of a potential fire, the smoke extract fans provide rapid smoke evacuation; Thanks to the specially designed blade structure and adjustable wings, it is possible to reach the high pressures and flow rates. IP55 ...
POINT KLIMA
Air flow: 60 m³/h - 250 m³/h
Rotational speed: 2,760, 2,850 rpm
Noise level: 45 dB
Fans for a powerful and safe ventilation of safety storage cabinets. • Housing and impeller made of polypropylene • Sealed against gas emission • Connecting fitting DN 75 • Protection class IP 55 ...
Air flow: 250 m³/h - 600 m³/h
Noise level: 56, 49, 41 dB
Safe technical ventilation of hazardous material work stations in accordance with regulations. • Impeller and housing made of PPS • CE compliant • Incl. mounting bracket with shock absorber • Also available as explosion ...
... supply air handling equipment to supplement and enhance the quality of the air needed to convey the product. Air handling fans for dust extraction, conveying and silo venting applications. Radial bladed and backward ...
Exhauster packages are available for pneumatic conveying, aeration systems and industrial processes. You can specify your choice of components or simply tell us your air requirements, and let us do the work. Either way, you get the most ...
Air flow: 8.5 m³/h - 1,000 m³/h
Noise level: 33 dB - 75 dB
... mounting system, for plates from 1 mm to 3.7 mm thick. The installation of FF Series filter fans does not require the use of tools. • The FF Series filter fans connect very quickly using a cage clamp ...
Fandis
Air flow: 87 m³/h
Diameter: 99 mm
Rotational speed: 2,691 rpm
... In usual extract fans the vibrations are transmitted to the surrounding areas while in SILENT extractor fans the vibrations are absorbed by the Silent Blocks. Interchangeable bars colours Interchangeable ...
Soler & Palau
Air flow: 1,250 m³/h - 95,000 m³/h
Use : Draws fresh air in and expels smoke. Designed for use in commercial and industrial buildings. Description : Short (standard) or long (optional) galvanised steel casing Multiblade aluminium impeller with adjustable-pitch ...
CIAT
Air flow: 38 ft³/min - 560 ft³/min
Designed for outdoor weather where resistance against falling rain, ice formation, and UV degradation is important to ensure operation of apparatus inside enclosure. Maintains a UL Tested NEMA Type 3R seal against enclosure without need ...
Diameter: 200, 160, 125 mm
... Mounting The P-Max fans fit the different extractors in the following ways; 1. The wall bracket directly: Flexi Extractor Arms, Pro-Flex PRSV and Super-Max SMSV. 2. Together with Fan Bracket ...
Air flow: 1,300, 2,100, 3,000, 4,600 m³/h
The Plymoth V-Max central fans are designed specially for smoke. gas and lighter dust. Our fans are made of heavy steel plate and come complete with stands for mounting on floors, walls or ceilings. Energy ...
Mobile Fan for Smoke, Gases and lighter Dust Mobi-Fan is a powerful ventilator, which is easy to bring with you on service, repair and other temporary work. Perfect for extracting welding fumes, gases, ...
External fan units for asynchronous and direct current motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) -Various ...
External fan units for servo motors above size 63 -High volume flow though flow-optimised design -Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) -Various connection ...
Built-in axial fans up to 300 mm diameter -Multifunctional use industrial fan /axial fan -High volume flow -Small number of versions thanks to multi-voltage design 230 V (single-phase) ...
Air flow: 3,000 m³/h
Vekita+ – In-line units Easy to install. 5 models up to 3000 m3/h. Can be installed indoors and outdoors. Soundproofed version available. Multi-connection version up to VEKITA+ 450. Ultra-flat model VEKITA+ 300. Single-phase motor with ...
Aldes
VC – Duct fan units Small dimensions. Maximum simplification of ductwork due to linear air discharge. Installed inside ducts. Closed synchronous motor with external rotor – single-phase 230 V / 50 Hz – Class E thermal ...
Aldes
Air flow: 5,000 m³/h - 72,000 m³/h
Helione – Axial fans CE marking-compliant. Class F200 (200 °C- 120 min) and F400 (400 °C – 120 min) in accordance with EN 12101-3. Large range for car parks, commercial and industrial premises. Multiple accessories for ...
Aldes
Air flow: 0.29 m³/min - 0.57 m³/min
Rotational speed: 5,000 rpm - 20,000 rpm
Noise level: 36 dB - 60 dB
- 40mm square x 28mm frame sizes - - - - - - Thermal/Lock protection type - - - - - - Rib type housing - - - - - - - - RoHS Compliance - - - - - - - - Weight 5g - - - - - - - - - Operating Temperature ...
Dongyang Fan Co. Ltd.
Air flow: 2.46 m³/min - 3.99 m³/min
Rotational speed: 2,000 rpm - 3,200 rpm
Noise level: 37 dB - 49 dB
- 127mm square x 38mm frame sizes - Thermal protection type - Flange type housing - UL/cUL/TUV agency listed - RoHs Compliance - Weight 355g - Operating Temperature -10℃~70℃ - Long Life Ball Bearings - Custom added-value options(i.e. ...
Dongyang Fan Co. Ltd.
Air flow: 2.5 m³/min - 4.46 m³/min
Rotational speed: 2,000 rpm - 3,600 rpm
Noise level: 34 dB - 39 dB
- 120mm square x 38mm frame sizes - Thermal protection type - Flange type housing - UL/cUL/TUV agency listed - RoHs Compliance - Weight 336g - Operating Temperature -10℃~70℃ - Long Life Ball Bearings - Custom added-value options(i.e. ...
Dongyang Fan Co. Ltd.
Air flow: 0.103 m³/s - 0.241 m³/s
Diameter: 250 mm
Rotational speed: 1,795, 1,410, 800 rpm
Plate Mounted Axial Flow Fan • Standard size 250mm • Air volume flow rates up to 0.241 m3/s • Static pressures up to 86 Pa • IE5 Highly efficient, EC motors • Fully speed controllable • Suitable for operating temperatures ...
ELTA FANS
Air flow: 0.33, 0.273, 0.221 m³/s
Diameter: 250 mm
Rotational speed: 1,460 rpm
Plate Mounted Axial Flow Fan • Standard size 250mm • Air volume flow rates up to 0.33 m3/s • Static pressures up to 63 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for ...
ELTA FANS
Air flow: 0.679, 0.602, 0.523, 0.411 m³/s
Diameter: 350 mm
Rotational speed: 1,360 rpm
Plate Mounted Axial Flow Fan • Standard size 350mm • Air volume flow rates up to 0.679 m3/s • Static pressures up to 95 Pa • Highly efficient, lightweight induction motors • Fully speed controllable • Suitable for ...
ELTA FANS
HD-V high-pressure fans The two automatic axes allow the system to cover large areas. The HD dust removal fan is a stationary unit that, guided by sensor or remote control, moves to any area as needed. Options ...
... That is how we make sure that our fans perform the best within your circumstances, in terms of efficiency, capacity and noise. Concerned with the energy use and noise production of the fans? Let us ...
Air flow: 28,800 m³/h - 85,320 m³/h
... reversible models provide flexibility for jet fan layout in a car park The jet fans have a circular silencer at the both sides to provide a laminar air flow besides reducing noise level. The uni-directional ...
Venco Havalandirma
... wide range of applications from custom-designed, heavy-duty fans for use in locomotives and off-highway vehicles to standardised, light duty commercial air handling fans. We make OEM axial fans ...
Howden BC Compressors
Centrifugal fans store significant amounts of energy when running, and if the fan is not correctly matched with the operating conditions the consequences for the plant operator can include excessive power ...
Howden BC Compressors
... Howden SX fan's acoustic output is up to 20 dB(A) lower than comparable conventional cooling fans and in many cases eliminates the need for expensive and bulky sound attenuation equipment. The blades ...
Howden BC Compressors
Air flow: 4,320, 2,940, 2,040 m³/min
HANIL Electric Co.,Ltd
HANIL Electric Co.,Ltd
Air flow: 17 m³/min - 72 m³/min
HANIL Electric Co.,Ltd
Air flow: 6,000 m³/h - 40,000 m³/h
Industrial polypropylene vacuum serve as link to galvanic plants and the scrubber.
• Centrifugal fans made of anti-acidic material • Case made of: PP – PVC • Impeller made of: PP – PVC – FE – AISI316 • Flow rates and prevalence: on request • Atex class fans available on request
... wide range of mine ventilation requirements. Seven base fan sizes combined with six different hub sizes offer the right fit for all requirements with lower costs and short lead times Total fan efficiency ...
One of the most common fans in Tunnel and Metro ventilation is the Jet Fan. Based on decades of experience and extensive R&D,TLT-Turbo has developed a new generation of standardized and modularized Jet ...
Air flow: 1,000 m³/s
... for supplying fans that are highly energy efficient and able to operate within the harshest environments. For this reason, designing fans that are purpose-built for use in thermal power plants is one ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining