- Hydraulics - Pneumatics >
- Valve >
- Control valve >
- mass flow
Mass flow control valves
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... (air) or 3.5 LPM (water) Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are ...
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F
... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure applications. These valves may also be utilized ...
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
... GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 60 °C
... 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm - 25 mm
Pressure: 0 bar - 8 bar
Temperature: -10 °C - 100 °C
Diaphragm valve GEMÜ 650TL is a manual tapping valve with automatic closing function which is pneumatically operated. The "keep-closed" override of manual operation is via a stainless steel handwheel. ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -50 °C - 180 °C
Two-piece stainless steel ball valve with screwed ends. Low pressure loss due to full and extremely smooth passage. Blow-out proof switching shafts are inserted from the inside. The ball valve does not ...
GEFA Processtechnik
The 2/2 way ball valve of the T-EAV901 Series is electric actuated with an AISI 316 stainless steel body and a screwed connection. The valves come in two different type such as on-off controlled electric ...
SMS-TORK
Pressure: 16, 40 bar
Temperature: -20 °C - 160 °C
... -EAV902 series 3/2 way ball valves are actuated by electric current and have a tough AISI 316 stainless-steel build, available in versions including electric-actuated with on-off control ...
SMS-TORK
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 130 °C
... T-EAV800 electric actuated butterfly valves is a series of valves that works on different mediums: water,hot water, air, aggressive fluid, food industry, gas, oil and steam among others. The TORK wafer ...
SMS-TORK
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 120 °C
L or T ball Locking handle with integrated PLS (Praher Labelling System) Machined ball Cushion O-Ring for PTFE seat Double sealed shaft Simple upgrade to automatic actuation Connections - flange, fusion socket, fusion spigot, threaded ...
Praher Plastics Austria GmbH
DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: -10 °C - 65 °C
Position feedback integrated in hand lever! Mechanical limit switch IP67 in AG-NI NO Mechanical in AG-NI NC, AU NO, AU NC on request Inductive NPN/PNP on request Namur on request Adjustable ...
Praher Plastics Austria GmbH
DN: 6 mm - 9.525 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C
Safety locking ring for handle PTFE ball seat Connection set (BSP, NPT) Assembling set Seal materials - EPDM, FPM Connections - female thread – male thread
Praher Plastics Austria GmbH
Part 0006522676 air fill valve for portable stainless steel tanks.
Haws AG - Headquarters for Europe, Middle East and
DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C
... , Chemical & Petrochemical Industries, Coolant Control For Machine Tool, Fuel, Ink & Paint Dispensing, Industrial Compressor, Laundry Equipment,Nuclear Energy, Pollution Control Equipment, Process Control ...
Rotex Automation Limited
Pressure: 0 bar - 10 bar
Temperature: -40 °C - 125 °C
Used in speed governing systems for cutting down flow of fuel when the speed limit is reached.
Rotex Automation Limited
Pressure: 0 bar - 12 bar
Temperature: -40 °C - 125 °C
These valves are available in various sizes and orifices. The application is to cut off the fuel flow to fuel pump and thereby stopping the engine.
Rotex Automation Limited
DN: 0.5, 0.75, 1 in
Pressure: 500, 350, 400 bar
Temperature: -20 °C - 125 °C
Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options.
DN: 0.75, 0.5 mm
Pressure: 0 bar - 350 bar
Mechanical valve to control the cylinder’s position.
DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C
FLOW CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► ...
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
DN: 0.5 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,000 °F
This globe control valve features a 1/2" body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight ...
Badger Meter
DN: 6 mm - 63 mm
Pressure: 350 bar
... provide an extensive range of male and female standard and super Staple-Lock ball valves with swivel females and the cost effective compact fixed female option. Ball valves are supplied with various handle ...
DN: 25 mm - 500 mm
Temperature: -198 °C - 593 °C
... Neles globe valves designed to provide the best possible control accuracy and wide rangeability with economical high-performance. Standard units are equipped with linear actuators and ND9000 intelligent ...
Pressure: 0 bar - 13.6 bar
Magna™ Flow Control Valve Series 608 Flow Control Valve For Gases or Liquids The Magna Flow Control Valve with an easy to read ...
DN: 16 µm - 250 µm
A 5-port valve utilizing a soft spool and is environmentally resistant (unfiltered air) and compatible in a wide range of fields. [Compatible cylinder] Dia.6 to Dia.250
CKD
DN: 3, 4, 6 in
Pressure: 14.2 psi - 170.6 psi
Temperature: -15 °C - 80 °C
... pilot control allows on-site pressure adjusting. Application of Groove End Pilot Control Pressure Reducing Valve Our Groove End Pilot Control Pressure Reducing ...
Elite Line Industrial Corp.
DN: 1.5 in - 12 in
Pressure: 1 bar - 13 bar
Model DTR / DFR, Diaphragm pilot control Pressure Reducing Valve reduces pressure of inlet flow into desired outlet pressure. Pressure Reducing Valve can prevent damage within pipelines ...
Elite Line Industrial Corp.
DN: 2.5, 1.5 in
Pressure: 2 bar - 7 bar
Model HRTL/HRTR, Fire Hydrant Pressure Reducing Valve, function similar to landing valve, attached in hydrant box serve as connector between pipeline and hydrant hose. Our Fire Hydrant Pressure Reducing ...
Elite Line Industrial Corp.
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
EXCESSIVE FLOW VALVE The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...
Tecnidro
Pressure: 17.2 bar
The FDV is a Fire Protection control valve for Deluge fire sprinkler systems, designed for installations in hazardous environments. The FDV-PC0 is a pressure control Deluge system, actuated ...
Raphael Valves Industries (1975) Ltd
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: 70 °C
The RAF 7R flow rate control valve is line pressure hydraulically actuated, 3-W plastic pilot. Normally the valve is partly open to allow constante flow rate. The head loss across the ...
Raphael Valves Industries (1975) Ltd
DN: 25 mm - 150 mm
Pressure: 0.8 bar - 10 bar
Temperature: 70 °C
The RAF 8R pressure sustaining control valve maintains a minimum upstream pressure, as set on the 3-W pressure sustaining plastic pilot, regardless of flow changes. The RAF 8R will fully open should upstream ...
Raphael Valves Industries (1975) Ltd
DN: 10 mm - 40 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
2-way FF PVC with connection kit Version with threaded or to-be-glued connections
Comparato Nello S.r.l.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C
2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43
Comparato Nello S.r.l.
DN: 20, 25 mm
3 way MMM BRASS Diamant ball valve 90° – DIVERTING / MIXING 3 vie MMM in OTTONE con codoli e calotte Passaggio totale PN16
Comparato Nello S.r.l.
Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C
• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.
... ] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. ...
DN: 10 mm - 50 mm
Pressure: 10 bar
• Control valve for pressure reduction • We obtain constant work pressures • Low vibration and behavior control • PVC, PP and PVDF materials • PTFE membrane, EPDM or FPM gaskets Advantage • ...
DIVATEC,SL
DN: 10 mm - 50 mm
Pressure: 10 bar
• Control valve for pressure reduction • We obtain constant work pressures • Low vibration and pressure control from 0.5 to 9 bar • PVC, PP and PVDF materials • PTFE membrane • PN10 ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...
DIVATEC,SL
DN: 20 mm - 80 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 60 °C
... modulating valves Modulating valves LMV are used in combustion processes that require linear adjustment of air or gas flow. The flow varies proportionally to the opening angle of inner mechanism, therefore ...
Elettromeccanica Delta S.p.A.
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection ...
Swissfluid AG
DN: 15 mm - 150 mm
Pressure: 16, 40, 50 bar
Temperature: -40 °C - 280 °C
Fully lined or stainless steel Sampling Valves for safe and representative sampling of corrosive and aggressive process media from pipelines, pressurized or under vacuum. Gaseous samples can be provided by means of the ...
Swissfluid AG
DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -40 °C - 200 °C
Fully lined Ball Valves for shut-off and control of corrosive, permeating liquids or gaseous media. Main features • Two-piece body, metal-to-metal joint • Anchored lining with positive locking to ...
Swissfluid AG
DN: 0.5 in
Pressure: 250 bar
Temperature: -20 °C - 80 °C
This type of valves allows the fast and exact regulation of the flow in a sense. Roquet commercializes regulators of 2 and 3 ways with connections with threaded fittings or plate.
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C
special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics
ASV Stuebbe GmbH & Co. KG
DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h
Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...
ASV Stuebbe GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C
Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator
ASV Stuebbe GmbH & Co. KG
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining