- Hydraulics - Pneumatics >
- Pump >
- Stainless steel pump >
- WOMA
WOMA stainless steel pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 22 l/min
Head: 0 m - 6.7 m
Power: 200 W
Chemical pump - B2 Vario Niro 0207-030 for liquid lubricants and cleaning agents The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing ...
Lutz Pumpen GmbH
Flow: 0 l/min - 45 l/min
Head: 0 m - 8 m
Power: 260 W
Chemical pump - B2 Battery Niro The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister ...
Lutz Pumpen GmbH
Flow: 0 l/min - 80 l/min
Head: 0 m - 8 m
Power: 260 W
Lutz Pumpen GmbH
Designed to fit large drums or containers, PowerMaster III pump units are ideal for lubrication systems using substantial quantities of lubricant. The modular combination of various air motors with pump ...
Flow: 7 m³/h - 725 m³/h
Pressure: 20, 18, 15, 14 bar
Head: 0 m - 150 m
W+ is a comprehensive range of premium sanitary end-suction centrifugal pumps designed with maximum operating benefits and minimal life cycle costs in mind. Reliable and heavy duty design Energy efficient ...
APV
Flow: 32 us gal/min - 2,300 us gal/min
Pressure: 14, 20, 25, 18 bar
Head: 17'00" ft - 450'00"
W+ centrifugal pumps from SPX FLOW are designed to achieve total cost optimization with high efficiency and product dependability. They are installed in countless process facilities around the world helping producers ...
APV
Flow: 522 m³/h
Pressure: 25 bar
Head: 0'00" ft - 155'00"
... its entire operating range. The inducer further enables the Wi+ pump to handle viscous or gaseous products beyond the range of other centrifugal pumps. The Wi+ is unique among inducer pumps, ...
APV
Flow: 8 l/s - 4,500 l/s
Power: 500 kW
... has supplied more than 1,500 Archimedean Water Screw Pumps all over the world reaching diameters of up to four metres. in 1978 WAMGROUP started manufacturing PA-type Archimedean Water Screw Pumps. ...
Flow: 0 m³/h - 250 m³/h
Power: 7.5 kW - 22 kW
Length: 3 m - 5 m
CHIOR VPH Long-Shaft Cutting Pumps with suction from above and double chopping tool excel through their high pumping capacity and cutting efficiency. The design of the pump housing, either made of cast ...
Flow: 12 l/min - 60 l/min
Head: 8.5 m
... fluoride, Stainless steel ► Media / Fluids: Acids, Alkalis, Aqueous salt solutions ► Seal: sealless ► Container: Small containers, Hobbocks, 200 l drums Product attributes ...
FLUX-GERÄTE GMBH
Flow: 27 l/min - 57 l/min
Head: 8.5 m
... design handle ► Low weight ► Small outer tube diameter ► Holding hook for hand nozzle at pump discharge ► With integrated holder for the pump Benefits ► ...
FLUX-GERÄTE GMBH
Flow: 240 l/min
Head: 13 m
The horizontally installed, compact container pump MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can ...
FLUX-GERÄTE GMBH
Pressure: 100, 200 bar
PFH-N Stainless steel manual pump Medium: oil Drive: manual Dosing volume in cm³/stroke: 3 max. delivery pressure in bar: 100 / 200 Number of ...
Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar
The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless ...
ARO, Ingersoll Rand
Flow: 0 l/min - 189 l/min
Pressure: 0.7 bar - 8.3 bar
... that have not been available in one pump solution. It's time to EVOlve your expectations of what a pump can do for you. MODEL: EP10X TYPE: Standard & Hazardous MATERIALS OF CONSTRUCTION: Aluminum, ...
ARO, Ingersoll Rand
Flow: 0 l/min - 197 l/min
Pressure: 1 bar - 8 bar
1” metallic air operated diaphragm pump The ARO metallic 1” PX10X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully ...
ARO, Ingersoll Rand
Pressure: 10, 30 bar
ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...
Pressure: 40 bar
ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...
Head: 8 m
Power: 3 kW
The PR 250 pumps are made of AISI 304 stainless steel and are suitable for transferring grapes and marc. The product is introduced into the hopper auger inside the pump ...
Flow: 0 l/min - 120 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
Diaphragm pumps Fluid connections: 1” BSP Air connection: 3/8” BSP Max delivery head: 80 m Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 4 mm Noise level: 72 ...
Fluimac srl
Flow: 0 l/min - 250 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
Diaphragm pumps Fluid connections: 1” 1/4 BSP Air connection: 1/2” BSP Max delivery head: 80 m Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 7,5 mm Noise level: ...
Fluimac srl
Flow: 0 l/min - 700 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
Fluid connections: 2” BSP - DN 50 Air connection: 3/4” BSP Max delivery head: 80 m Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 8,5 mm Noise level: 78 dB Max Viscosity: 50.000 cps Displacement per ...
Fluimac srl
Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW
STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...
SAER
Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW
PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation ...
SAER
Flow: 0 m³/h - 1,700 m³/h
Head: 0 m - 500 m
Power: 0 kW - 500 kW
PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation ...
SAER
Flow: 130 l/min
Pressure: 8 bar
Fluid temperature: 65 °C
Diaphragm pump in polypropylene and AISI 316 stainless steel series PPIB-1, membranes in Teflon® and Hytrel®, balls in Teflon® and seats in AISI 316 stainless steel FLUIDSWASTE ...
RAASM SpA
Flow: 150 l/min
Pressure: 8 bar
Fluid temperature: -10 °C - 65 °C
Diaphragm pump series APPB-12 in polypropylene and aluminium with sunction tube in stainless steel for drums 180 ÷ 220 kg FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE | WINDSHIELD FLUID ...
RAASM SpA
Flow: 65 l/min
Pressure: 8 bar
Fluid temperature: 65 °C
Diaphragm pump in polypropylene series PPB-12 with multi ported inlet/outlet, membranes and balls in Hytrel® and seats in AISI 316 stainless steel and polypropylene FLUIDSWASTE OIL ...
RAASM SpA
Flow: 400, 1,000 m³/h
Pressure: 0 bar - 24 bar
... MR-0-175. One pump, several versions: In the twin version, the suction and discharge connections of the pumps are fitted with manifolds so that there is only one process connection for the inlet and ...
Flow: 500, 1,000 m³/h
Pressure: 0 bar - 72 bar
... necessary to transport gas and liquid to the central collection stations. Multiphase pumps allow you to pump without initial phase separation. In addition, by using the pumps, you conserve ...
Flow: 0.2 m³/h - 13 m³/h
Pressure: 10 bar
... time: With its innovative design, the PERIPRO® hose pump in food version enables you contamination-free conveying in the food industry as well as effortless cleaning. The food version of the hose pump ...
Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve ...
Maximator GmbH
Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C
ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 50 bar
Fluid temperature: -20 °C - 100 °C
ECO.pump external gear pump Competent at metering viscous media up to 200,000 mPas, the ECO.pump lends itself to many common applications. The stainless steel ...
Flow: 0 l/min
Pressure: 0 bar
Head: 0.5 m - 10 m
Electromechanical assembly in AISI 304 chrome-nickel steel, for submerged operation, fitted with 2 (two) opposing mechanical seals in silicon carbide and alumina graphite in oil sump with food-grade oil lubrication, and ...
Zenit
Flow: 0.5 l/s - 18.4 l/s
Pressure: 0 bar
Head: 0.96 m - 14.9 m
Electromechanical assembly in CF-8M (AISI 316) stainless steel, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals assembled opposing and with oil lubrication. Oil bath motor.
Zenit
Flow: 0.5 l/s - 12.5 l/s
Pressure: 0 bar
Head: 0.92 m - 17.8 m
Electromechanical assembly in CF-8M (AISI 316) stainless steel, for submerged operation. Seal set comprising 2 (two) silicon carbide mechanical seals assembled opposing and with oil lubrication. Oil bath motor.
Zenit
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Aalborg Instruments
Pressure: 0 bar - 0.848 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 m³/min - 6 m³/min
Head: 0 m - 180 m
Power: 22 kW - 110 kW
The LH-14-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1 m³/min
Head: 0 m - 120 m
Power: 11, 22 kW
... LH-W-14-series is a submersible stainless steel casting high head corrosion-resistant pump having dual impellers designed for handling aggressive and corrosive liquids. The all wetted ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 2.2 m³/min
Head: 0 m - 45 m
Power: 0.4 kW - 11 kW
The SFQ-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...
Waukesha Cherry-Burrell
Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...
Waukesha Cherry-Burrell
Flow: 1.8 m³/h - 150 m³/h
Pressure: 10.3 bar - 34.5 bar
Fluid temperature: -40 °C - 149 °C
... 316L stainless steel product contact surfaces standard; 316L stainless steel or electropolish of all product contact surfaces optional Stainless steel ...
Waukesha Cherry-Burrell
Pressure: 0.06 MPa
Weight: 500 g
... resistance of the pipette pump components: (1) Pump head material: aluminium alloy; (2) Piston material: stainless steel. 06 End position optical detection End ...
Flow: 50 l/h - 990 l/h
Pressure: 0 bar - 10 bar
Weight: 38, 48 kg
... left-hand side. dosing pumps with the head on the right-hand side can be supplied. Duplex dosing pumps are available with the head combinations shown in the following tables. The heads are arranged in ...
Flow: 2.4 l/h - 30.7 l/h
Pressure: 1.5 bar - 20 bar
Power: 25 W
The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven ...
Flow: 2.4 l/h - 30.7 l/h
Pressure: 3 bar - 20 bar
Power: 25 W
Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision ...
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Flow: 0.5 m³/h - 8 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 45 m
... ranging between 0.5 to 8 m³/h, and cannot be realised with a reactor pump. For this reason, Egger has developed a pilot pump S that meets all requirements for commercial process pumps. ...
Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C
... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, ...
MOUVEX
Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm
... Series Eccentric Disc Pumps have been designed to provide premium performance and the ultimate in full containment and safety in chemical-processing applications. They feature a unique seal-less design with a double stainless-steel ...
MOUVEX
Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm
... Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely hygienic operations. They feature a unique seal-less design ...
MOUVEX
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 14 l/h - 140 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW
... - TUBE PUMP / ALBIN PUMP Specifications: Flow rate: up to 140 l/h (97 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, NBR, ...
Albin Pump
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable ...
Johnson Pump
Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m
Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution ...
Johnson Pump
Flow: 0 m³/h - 280 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m
... magnetic drive horizontal centrifugal pump to ISO 5199 and ISO 2858 /EN 22858 100% leak free Long life cycle, reduced maintenance costs Flanges according to ISO 7005 PN 16 For stainless ...
Johnson Pump
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining