|
|
|
The Tiger joystick transmitter for remote controlling of cranes and other hoisting equipment has duplex, CANopen and Modbus abilities. Together with your application it can communicate with an external unit, e.g. a weight sensor. It has 2 joysticks with 2 speeds or 2 joysticks with 4 speeds.The transmitters stop function is approved according to SIL3 IEC 61508 and it transmits on 433-434 MHz with 69 available channels. Tiger is certified in accordance with CSA .
|
|
Remotus Mercury 100 is built to handle everything from standard solutions to highly sophisticated machines. It’s primarily used for larger industrial applications and for the most complicated cranes. The Mercury 100 has two joysticks that can control up to four movements. It can also be ordered with indicators for information from the crane. Enormous effort went into making the user-friendly Mercury 100 operate smoothly.
Åkerströms’ Remotus Mercury line contains customized products for remote control of cranes and overhead cranes and for other machine control, for example, in manufacturing, steel works, mines, and the processing industry. These products have a modular design and are easily adapted to your operation’s specific requirements. Functions, frequencies, design, and layout are easily tailor made.
|
|
The HETRONIC NOVA family of transmitters sets the standard for today's industrial radio remote controls.
The small and sturdy design of the NOVA-M is not too small to allow operations with gloves. No compromises are made in regards of functionality and operator friendliness.
The NOVA-M is available with either two dual axis joysticks (digital or proportional) or with one dual axis joystick (digital or proportional), leaving room for auxiliary functions. It comes standard with a battery charger and two rechargeable batteries.
|
|
|
|
|
|
ELITE Series Radio Controls
ELITE Overview
Kar-Tech's ELITE series radio remote controls offer the OEM a rugged, ergnomic enclosure with plenty of room to fill with controls. ELITE's are typically used in applications requiring multiple joysticks or paddles for proportional control. The ELITE series radios provide the operator up to 1000' or more range, and are backed by the same quality protections that are included standard with all of Kar-Tech's controls.
At A Glance:
- Long-range operation: 33mW of output power combined with a super-sensitive receiver provides up to 1000 feet of range
- Spread Spectrum: Interference is virtually eliminated
- Built To Last: Receiver sealed to IP-67, all sealed switches, joystics on transmitter.
- Configurable: Single or dual-axis joysticks, paddles, thumbwheels, switches, buttons, etc. all available to configure your control experience.
Basic Technical Info:
The ELITE series operates between a range of +9 to 35VDC, and is protected for voltage spikes and reverse battery. It has an operating temperature range of -40C to 85C, and runs on a rechargeable battery pack capable of a full charge in one hour.
Typical Applications:
- Concrete Pumps
- Crane Controls
- Digger Derricks
- Drilling
- Road Equipment
- Forestry Equipment
The Elite has been used successfully in hundreds of different market sectors.
|
|
PLANAR-NL SMJ Serie
-various remarks with max. 3 joystick or on/off switches, as well as, push buttons, turn-switches or toggle switches, potentiometer,
-frequency change 67 channels,
-optional data feedback,
-energy saving function,
-display pixel-amount: 128 x 64, display size: 47,34mm x 26,86mm,
-console remote control,
-AA batteries (1,2/1,5V),
-(also available as dual-axis-proportional),
-SMJ-Technology (Surface-Mounted-Joystick)
-Protection class IP 65
|
|
|
|
|
|
LINAK has introduced a series of different control boxes - from small control boxes suitable for operating one or two actuators to sophisticated basic control boxes with microprocessors suitable for operating six actuators.
The most simple and the most advanced control boxes
The most simple control boxes are only able to convert control signals from the handset into operating voltage for the actuator whereas the most advanced control boxes have functions such as parallel running of several actuators and memory drive. Moreover, the most advanced control boxes are those controlled by microprocessors. These can be delivered with customised software.
Furthermore, some control boxes are designed for connection to the mains, for example, mains voltage of 100, 120 or 230 / 240 V AC for use in different countries; others have an internal or an external battery. Versions with both battery and mains are available too.
Safety features
Most LINAK control boxes are designed to provide Electronic Overload Protection (EOP). This means that it protects the actuator against overload by disconnecting the current when the actuator is fully extended or retracted or if an overload occurs during operation. The control boxes are also designed so that they will short-circuit the motor terminals (poles) when the actuators are not running. This solution gives the actuator a higher self-locking ability.
|
|
The controls are the units used when you want the LINAK system to perform a movement. They determine whether the control box make the actuator move in or out. There are more variants of LINAK controls such as handsets, Foot Switches, Desk Panels and attendant control panels.
All the handsets are available in both black and grey.
|
|
The ZEUS B2 transmitter combines the advanced ergonomic design and functional features required in standard application fields such as tower cranes, factory cranes, small concrete pumps, high pressure and vacuum pump vehicles and any other kind of machine for witch double-axis joysticks represent the ideal type of movement command.
The ZEUS B2 console has a compact size but nevertheless it reserves ample space for on/off and proportional commands making it an easily customisable transmitter for special applications.
|
|
The universal Demag DRC-MP radio control:
Wherever you use radio control systems to control cranes, hoists, machinery and installations, you benefit from much greater flexibility than with wire-connected controls.
|
|
|
a portable TRANSMITTING UNIT which communicates to the receiving unit, the sequence of digital data that is necessary for carrying out the command selected by the operator using the command devices (pushbuttons, selectors, joysticks).
|
|
|
The THOR B4 transmitter is similar to the B3, but with the addition of a fourth, double axis joystick. This makes it an ideal system for High Integrity factory cranes, 7-8 functions hydraulic cranes, crawler lifting machines and other special machines. In addition to the 4 double axis joysticks, the THOR console has space available for several on/off and proportional commands making it an easily customisable transmitter for special applications whether AC or DC powered.
|
|
JAY Electronique's new ORION radio remote controls are designed to satisfy the needs of a wide range of standard and industrial applications, including simple and multifunction uses, in the field of :
- industrial equipment
- industrial lifting : hoists, small winches
- industrial vehicles
- building industry equipment
- infrastructure equipment
- agricultural equipment
The ORION range comprises a broad range of transmitters and receivers, fitted with numerous features and significant technological breakthroughs :
- European frequency band of 433-434 MHz, with 18 possible frequencies
- FM radio link
- simultaneous commands
- programming of different functions by jumpers in receivers or using
buttons on transmitters
- mechanical protection of buttons
- "on/off" button (on some models)
|
|
|
|
|
|
The Tyro Pyxis, the advanced and versatile hand-held transmitter
The Tyro Pyxis 8-fold hand-held transmitter particularly stands out thanks to two properties. Firstly they have been developed with a high level of technology and they are very flexible to use, and secondly they have been produced in such a way that they continue to function trouble-free even in the toughest conditions and as a result of their sturdiness have a long life.
With this 8-fold hand-held transmitter the user has a choice of two different keyboard lay-outs and the client can choose his own company symbols to go on the keys at his own discretion. Here, too, it is possible to program up to a maximum of 36 functions using a menu structure so that it is still easy and clear how to operate the hand-held transmitters with the aid of a menu option using four LEDs.
These hand-held transmitters also stand out due to their particularly short reaction time and they have a back-lit keyboard that facilitates use in the dark or in bad weather.
Up to a maximum of 36 functions thanks to a menu structure
Guaranteed safety (EMC/E11 Certificate/R&TTE/CE)
Ergonomic design, impact-resistant and shockproof
Back-lit keyboard
Your choice of symbols on the keys
Keyboard possible on the Auriga receiver
Receiver with IO board
|
|
|
MD model with up to 31 digital commands, configurable joysticks with 1 to 5 step for each semi-axis. Highly customizable options, a rugged structure and comfortable design make this Transmitting Unit suitable for a wide range of industrial applications. The Receiving Unit bus structure makes service time shorter and reduces the number of spare parts needed. Automatic frequency change is performed from the transmitter. Plastic housing, resistant to external agents, IP65 protection degree, comfortable design that eases control operations. Available options: Range Limiting Infra red Start-up Data Feedback
|
|
|
|
|
|
IKUSI provides global services and solutions for the remote control, maintenance and monitoring of machines. It therefore researches, innovates and develops solutions for safe and remote handling of cranes and lifting machinery.
IKUSI TM703/4/5/6/7/8: Radio Remote Control Systems with console box transmitters for hoisting machinery and mobile applications with On/Off and/or analogue control
Main characteristics:
Available bands: 433/870/915/419/447/918 MHz
NiMH rechargeable batteries
Fast and intelligent CB70 battery charger
Main mechanisms:
- Two axes multi step or stepless joysticks configurations: opened and crossed.
Auxiliary mechanisms:
- 1-0-1 position selector switches with maintained position or forced return to 0 position
- 0-1 position selector switches with maintained position or forced return to 0 position
- 6, 16 and 24 positions binary and rotary switches
Easy and fast working frequency channel change by software and/or automatic working channel selection -LBT: Listen before talking-
CAN bus receiver with serial port available
Fully compatible with other field buses: IQAN, J1939 and Profibus
LCD70 display –optional- for feedback information from the receiver, including LA70 range limiter
|
|
|
The THOR B3 transmitter has been designed for use with a vast range of complex and high integrity machines, such as, 4-5 booms concrete pumps, full accessory equipped factory cranes, 6 functions hydraulic cranes, special tower cranes, drilling and tunnelling machines. In addition to the 3 double axis joysticks, the extra wide THOR console has capacity for several on/off and proportional commands making it an easily customisable transmitter for special applications whether AC or DC powered.
|
|
|
To satisfy all the functions normally required by a numerical control, OSAI have introduced a new operator console that can be connected to the CNC either through the new OS-WIRE proprietry bus, or the standard CANOpen interface. With the combination of WinMedia + operator console we offer an imaginative and innovative example of a numerical control “front end”. As well as the ability to customise the existing pushbuttons, in the electronic interface with standard components, the flexibility of configuration to suit the entire operator interface for most types of application is guaranteed.
|
|
|
|
|
|
Wired Pendants
Wired Pendant Overview
Kar-Tech's wired pendants are the industry standard in machine control in the mobile crane market, and have been successfully used across the construction equipment industry. Made of high-impact plastics, and using only the most ruggedized & sealed switches, buttons, and indicators, these are products designed to take whatever the job site can throw at them. Standard configurations run between two and ten switches with or without variable speed trigger for precise machine control, but variations are common and easily accomodated. Kar-Tech's pendants are available in a range of colors, and with different user-interfaces and connectors easily available and integrated into the final design. Our pendants can be as simple as switched power, or incorporate our best-in-class electronics for advanced features.
At A Glance:
- Built to LAST: High-strength, impact-resistant plastics.
- Built for YOU: Wide range of colors and options available.
Basic Technical Info:
Kar-Tech's wired pendants are built of a high-strength, impact-resistant plastic, and if electronics are incorporated, operate between -40 and +85C. Only top-of-the-line sealed switches, paddles, connectors, etc are used to prolong the pendant's life.
Typical Applications:
- Stick Boom Cranes
- Gantry Cranes
- Road Machinery
- Drilling
- Agricultural Equipment
- Forestry Equipment
Our wired pendants have taken a beating in hundreds of different market sectors.
Available Options
- Variable Speed Trigger: Proportionally control your valves!
- In-pendant valve driver electronics
- Custom colors, connectors, decals
|
|
|
|
|
|
HD and WP stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.
PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.
CPB pendant stations are our most compact, ergonomic pendants. Available in single or two speed operation with NEMA 4X construction and CSA & UL Approval.
PBP pendant stations are weatherproof, heavy duty rubber stations with plug in pushbutton inserts, from one to five speeds. Components are readily available from our stock.
PBM pendant stations are lightweight and ergonomic and use 22mm operators. One through five speed buttons are available. Enclosures are NEMA 4X construction with CSA & UL Approval.
|
|
COMPAUT specialist recognized in the electronic cranks, offers a very complete range of generators d’ impulses to be gone up on desk or to integrate out of mobile case.
The company also carries out all types of button boxes and cases of remote control, according to your schedule of conditions.
In addition to the usual functions, these portable cranks and these button boxes can receive various possible options:
• Touch dead man
• Posting by RS 232
• Keys proportional
• Side validation
• Potentiometers
• Binary selectors
• Joystick….
For more than 15 years COMPAUT has answered the most various projects of l’ study with manufacture.
NEW: Time reduced by the control in its workshops of all the phases of the realization.
|
|
|
|
|
|
Handheld terminal HBG_20
- Decor-membrane / short-travel keys 3 x 3-key matrix
- Integrated three-step consent switch
- Integrated EMERGENCY OFF, two-channel 2 NC, 1 NO
- 2 x rotary selector switch, 6-step BCD for example, for preselection
- Integrated cable: length 5m
- Integrated hand wheel (100 graduations, magnetic indexing)
- Housing made of impact-resistant plastic / protection class IP65
- Connection kit
- Universal magnetic mounting
- Option: customised printing, customer logo
Handheld terminal HBG_20
- Membrane keyboard 2 x 3-keys, operated individually
- Hand wheel (100 graduations, magnetic indexing)
- Integrated EMERGENCY OFF, two-channel 2 NC, 1 NO
- 3 x rotary selector switch, 6-step BCD for example, for preselection, override
- Integrated cable: length 5m Various connection options
- Housing made of impact-resistant plastic / protection class IP65
- Connection kit
- Universal magnetic mounting
- Option: integrated three-step consent switch
Option: customised printing, customer logo
|
|
|
The THOR M8 transmitter is equipped with up to 8 single-axis joysticks and is specifically designed for machines moved by proportional electro-hydraulic valve banks such as, 7-8 functions hydraulic cranes, crawler lifting machines and other special machines. In addition to the 8 single axis joysticks, the very wide THOR console has room for several on/off and proportional commands making it an easy to customise the system for complex DC powered applications.
|
|
Portable Transmitter Console RC7
RADIO REMOTE-CONTROL FOR INDUSTRIAL EQUIPMENTS, CRANES, HANDLING MACHINES, CABINS,…
Light, compact and ultra-tough case.
Up to 30 ON/OFF and/or 7 proportional channels.
Plug-in Lithium battery (long lasting, 4 h charge).
Personalized controls and control panel.
TRANSMISSION:
European ISM band, license-free use, radiated power 16h in continuous use, recharge: 80% in 2h, 100% in 4h.
Charger: power supply 12/24Vdc or 110/230Vac, cord 1.2m.
Ambient temperature during charge: +5 to +50°C.
Signaling on charger: 1 Led = power supply, 1 Led = battery charge level (fixed during charge from 0 to 80%, flashing from 80 to 100%, unlit: battery charged).
MECHANICALS:
Elastomer-filled polyamide case measuring: 160 x 240 x 150mm, weight: 1.6Kg.
Nylon strap.
|
|
|
The intelligent teach pendant (ITP) is a portable console unit that can be connected to the 10 Series CNC system to so that the operator can input and output typical system commands. The ITP is also available with a mushroom emergency stop pushbutton and a “live man” switch to ensure safety when in use.
|
|
|
At the heart of every electrical system is the control station. Even under the most adverse conditions, CEAG's control stations can be used and operated reliably.
|
|
1 to 4 keys 1-way and 2-ways radio remote control
* Wireless control for 1 to 10 logical status up to 400m
* 1-way and 2 ways versions
* 433.92 or 868MHz
* Specific marking on demand
* Comply with the European standard RTTE EN 300-220 / EN 301-489
Receivers
* RS232 or USB serial decoder, 4 relays or 4 binary outputs receivers
* 433.92 or 868MHz
* Comply with the European standard RTTE EN 300-220 / EN 301-489
* Available in IP65 box ready for use for some referencesConsumer market,
tertiary and industrial applications
Home remote controls (gate, vehicle, roller shutters…)
Home automation
Access control
Security – alarm
Remote control
Automatics, robotics…
DemoKit - Integration kit including : demoboard, module, remote control, RS232 cable, power supply available for this product
* Evaluate the products
* Perform RF measurements
* Develop a prototype
|
|
The whole Transmitters/Receiver of the radio apprears under the shape of a button box or a pupitre.
These radios work on the new “proper” frequencies. These utilisations are innumerable, from the hoist to the travelling carne, central concrete, automaton…
Very compact : 200g for the smallest ; range 200m, endurance 25h ; until the pupitre with variable configuration according yours specifications.
|
|
Remotus MB-28 is a totally new, unique transmitter with eight two-stage pushbuttons and two joysticks incorporated into the same model. The transmitter is easy to maneuver with one hand—making it better for certain situations in which functionality of a joystick transmitter would otherwise be needed.
Remotus MB-28 is designed for remote control of various mobile applications such as load changers, salvagers, concrete pumps, and more.
Remotus MB-28
• Hand transmitter with buttons and joysticks in one model
• Well-conceived, ergonomic design
• Can control 4 analog and 8 digital functions in 2 steps
• Opportunity to extend the functions with a selection button
• IP65 classed
• Easy to configure and functional
• Portable configuration via CIM-card
|
|
|
|
|
|
Remotus T-Rx is Åkerströms Björbo’s mobile platform for radio remote control of mobile applications. The Remotus T-Rx receiver line is modular and flexible—so it can be customized for your specific needs. The line consist of three different receiver models and one transmitter model.
The Remotus T-Rx receivers are designed to control all mobile applications with up to 8 analogue functions, PWM (0-2 A) or analogue outputs (0-10V or 0-20 mA). The system can also be used to equip wheel loaders, excavators, mobile cranes etc. with radio remote control. The system is adapted for tolerating tough conditions such as drastic temperature differences, dust, vibrations, oil, and dampness.
Remotus T-Rx 100, is a CANopen based receiver for control via existing PLCs. It is designed to control all mobile applications with up to 8 analogue functions.
The Remotus T-Rx 1000 receiver is designed to control all mobile applications with up to 24 on/off functions.
Remotus T-Rx 1500 is a complete receiver designed to control all mobile applications with up to 8 analogue functions, PWM (0-2 A) or analogue outputs (0-10V or 0-20 mA).
|
|
|
Cavotec Micro-control offers a wide range of radio remote controls for the crane, steel, offshore, mining & tunneling, maritime and the process industries. The high quality, service-friendly, ergonomic design together with a technological leadership and vast sales and service organization gives us the opportunity to meet the specific requirements of our customers, in a quick and cost-efficient way.
|
|
|
|