|
|
|
The KTC system is used to create a high-speed, high-safety wireless link for up to 20 commands or status signals. Inputs connected to the transmitter are output at the receiver with a response time of < 100ms. The system may be used for the transmission of status or alarm signals, or connected to a control panel for remote control of a machine. A fail-safe STOP command and a START command are also provided to allow the construction of full-safety remote control systems using conventional control panels - but wireless.
|
|
|
The M8 transmitter is designed for mounting on a DIN rail, and is the ideal solution for applications requiring wireless transmission for on/off and/or proportional commands coming from sensors or RS232 and RS485 ports. The DIN rail mounted transmitter should be placed inside a control box for clean and trouble free installation, and is supplied complete with an external antenna for the radio communication. In addition to the 21 on/off + 4 proportional commands, Start, Stop and Frequency Change input are available as for traditional radio control commands.
|
|
The Light series pushbutton handsets are distinguished by their low weight (420g including battery) and their small dimensions (185x80x43mm.). Much emphasis has been placed on the operator comfort in high-usage applications - the transmitter's weight distribution, key and clip systems are all ergonomically designed. The system uses light weight Ni-Mh rechargeable batteries, which power the transmitter for up to 12 continuous hours and recharge in 4 hours in an intelligent charger. Each system is supplied complete with 2 batteries and a charger. The system is fail-safe to Category 3 of EN 954-1 for Stop.
|
|
I-syon, smaller, lighter and more versatile: these characteristics sum up the I-syon range, which completes and reinforces Ikusi’s catalogue of remote-control units. The company can now offer a full range of remote controls capable of meeting the needs of the many different markets in which it operates currently and
plans to operate in the future.
The I-syon range which Ikusi is now launching on the market is the result of an intense process of development that has led to major innovations in software, hardware and mechanical design.
|
|
|
The pushbutton radio type M550 WAVE S range is available with 4, 6 or 8 double-step pushbuttons for the movement commands. In addition, and always present is a Start/Klaxon button and a STOP mushroom-head button. The radio remote also has space for one optional command which can be a multi-position rotary switch, a single-step button or an analogue potentiometer. IMET have paid special attention to the ergonomic design of the WAVE transmitter bearing in mind the practical aspects of compact overall size, large pushbuttons suitable for operations with gloves, easy access and protected STOP button. This make the WAVE S an ideal tool for the control of hoists, overhead cranes and small tower cranes. The possibility of customisation extends the possible uses of this type of transmitter to a large variety of machines equipped with on/off control boxes whether AC or DC powered.
|
|
|
|
|
|
POCKET Series Radio Controls
POCKET Overview
Kar-Tech's POCKET series radio remote controls offer the OEM or end-user an affordable way to quickly and easily control many on/off and proportional outputs from a distance of up to 1000' feet or more. This remote is built to withstand hell, encased in a solid plastic protective boot, with a sealed enclosure and all sealed components used. It's big enough to fit solidly in an operator's hands, and the typically used pushbuttons provide great tactile and audible feedback for the operator. Full two-way communications are used so that error codes and signal and battery indication is displayed on the transmitter, similar to all other Kar-Tech products.
At A Glance:
- Long-range operation: 33mW of output power combined with a super-sensitive receiver provides up to 1000 feet of range
- Spread Spectrum: Interference is virtually eliminated
- Built To Last: Epoxy-potted receiver, and silicon coated electronics
Basic Technical Info:
The POCKET series operates between a range of +9 to 35VDC, and is protected for voltage spikes and reverse battery. It can provide many outputs capable of supplying 5 amps per. The transmitter runs on 9v batteries or a rechargeable battery pack with a nominal lifespan of several months.
Typical Applications:
- Telehandlers
- Small Concrete Pumps
- Feed Trailers
- Bale Wrappers
- Spraying Equipment
The POCKET has been used successfully in wide-ranging market sectors.
Available Options
- Different color protective boots
- Belt clip
- Custom decals/product branding
|
|
|
|
|
|
CBX Series are industrial connection boxes designed to speed up installation, configuration and maintenance tasks of Datalogic Automation’s 1D/2D code readers.The complete range of optional modules provides connectivity to the most common fieldbus systems while extending communication capabilities.
• COST EFFECTIVE
CBX Series features an extremely low cost of ownership by reducing installation time, and, in case of replacement, minimizing system downtime. CBX Series is the standard connectivity solution for Datalogic Automation product offer.
• EASE OF INSTALLATION
Installation is simplified thanks to accessible through-holes for mounting screws with closed box. Optional adapters are available for fast fixing to Bosch profiles and DIN rail mounting.
• EASE OF WIRING
Pinout standardization simplifies wiring to the appropriate terminal block. In
addition, the accessible spring clamps allow easy cabling operation.
• EASE OF MAINTENANCE
Fast access to service interface allows comfortable analysis and sw parameters optimization alongside with standard reading operation. When quick and reliable replacement is needed, CBX Series takes advantage of the optional Backup module. This memory unit simplifies Backup and Restore procedures
while granting secure and rapid replacement.
• INDUSTRIAL STRENGTH
CBX Series features IP65 (NEMA 4)protection class and an operating temperature up to +50°C (+122 °F).
|
|
|
a portable TRANSMITTING UNIT which communicates to the receiving unit, the sequence of digital data that is necessary for carrying out the command selected by the operator using the command devices (pushbuttons, selectors, joysticks).
|
|
|
The transmitter ZEUS NJ has been developed for use with high complexity machines where proportional potentiometers, push-buttons and selector switches represent the ideal types of movement commands. The spacious console has room for a large number of commands making ZEUS NJ flexible and customizable for complex AC and DC powered applications.
|
|
|
|
|
|
Joystick transmitter Mercury 500
Mercury 500 takes on very highly sophisticated equipment. It’s primarily used for larger industrial applications and for very complicated cranes. The Mercury 500 comes with three joysticks (standard) that can control up to six movements; four joysticks are possible, and they can control up to eight movements. The Mercury 500 can be ordered with various background-lit displays for showing information from, e.g., scales, position indicators, and PLCs that are mounted on cranes.
Joystick transmitter Mercury 300
The Mercury 300 is our mid-size model that works with everything from off-the-shelf solutions to advanced equipment. It’s primarily used for larger industrial applications and for the most sophisticated cranes. The Mercury 300 has two joysticks that can control up to four maneuvers. It can be ordered with various background-lit displays for showing information from, e.g., scales, position indicators, and PLCs that are mounted on cranes.
Åkerströms’ Remotus Mercury line contains customized products for remote control of cranes and overhead cranes and for other machine control, for example, in manufacturing, steel works, mines, and the processing industry. These products have a modular design and are easily adapted to your operation’s specific requirements. Functions, frequencies, design, and layout are easily tailor made.
|
|
The Sesam 800 has various usage areas like remote control of doors, gates, barriers, fans, floodlights, and more. The system
can also be used for winches and other non-safety relevant automotive applications. It is robust, flexible, straightforward, and uses modern digital technology.
Sesam 800
• Flexible, simple and robust
• Several transmitters and receivers
• Utilizes the 869 MHz (or 926.5) frequency band
• Feedback function indicates active relay
• Based on 16,7 million unique codes
• Protection class IP65
• Checksums ensure error-free message transmission
• Encrypted authentication for extra high security
• Receiver with LCD character display and detachable memory card as an option
• Big range of carrying devices
|
|
|
If security and convenience are two of the major attributes your customers demand for the electronics in their vehicle doors. TriMark has the answer. Full functionality and state-of-the-art design and manufacturing means you can depend on TriMark electronics to be working many years down the road.
|
|
Pit bottom switches with knob or interlocked lever, recall drive units with socket outlets,
inspection boxes from 4 up to 8 functions.
Fully compliant with EN81..EN60068-2-6 - Resistance to vibrations - EN60068-2-27
Resistance to shocks. All components of the GM series are designed to the relevant
standards, hence ensuring the correct creepage and clearance distances
after possible vibrations and shocks.
|
|
ComEx is a flexible system offering standard as well as customer-specific local control and indicating units.
You have the choice between three standard enclosures which can accomodate up to three different control and indicating devices. Combinations of up to three ComEx enclosures are possible.
Either stuffing box glands in M20 x 1.5 and M25 x 1.5 made of plastic or cable glands made of metal are available for the electrical connection. The plastic glands require no lock nuts. Metal glands are screwed into a metal earth plate sheet inside of the enclosure. Maximum amount of cable clands: two off M20.
To ensure easier operation on site, each enclosure can be equipped with an individual info-label. For offshore applications special oil-resistant attachments are available.
|
|
Control, display and regulation devices are assembled in a clear layout in 8146 series control stations. The number of units fitted depends on the control station size and the space required to fit each device. It is not possible to standardize this.
Explosion protection to CENELEC, IEC
Can be used in Zone 1 and Zone 2, Zone 21 and Zone 22
Enclosure in glass fibre reinforced polyester resin, in galvanized sheet steel or stainless steel
Different enclosure sizes
Different enclosure heights
Can be combined to larger units
Equipped with built-in units for snap-in fitting (control units, indicating lamps, illuminated buttons, control switches, ammeters, voltmeters
Different options (Flanges, Cover hinges, Flanges enclosure, Brass plates for metal cable entries)
|
|
In order to answer the requirements related to the use of equipment in potentially explosive atmospheres, JAY Electronique has developed a new series of ex-proof radio remote controls : the XD series, that can be used in zones 1 & 2 (gas) and zones 21 & 22 (dust) explosive atmospheres.
Typical applications :
- industrial equipment
- industrial vehicles
- industrial hoisting devices
Industrial sectors :
- chemistry
- petrochemistry
- pharmacy
- metallurgy
- sugar and cereal industry
Protection mode : Transmitters : intrinsic safety
Receivers : Ex-proof + intrinsic safety
Products complying with the European Directive ATEX Manufacturer 94/9/CE – LCIE certificate
|
|
|
The system consists of transmitter, receiver and battery charger and also includes the Listen Before Transmit feature allowing the Mito to automatically scan, find, and lock onto a clear and available frequency upon pressing of start button.
|
|
|
T50-Cheetah GSM1 transmits via the mobile phone network, which means that it has a largely unlimited range. It can be used advantageously for applications where there is a requirement for longer range, e.g. to control heating and lighting, alarms indicating faults, to mention a few. It supports the EGSM 900, DCS 1800 and PCS 1900 mobile networks, i.e. triple band. GSM1 communicates with a mobile phone either via a telephone call or via a coded text message.
|
|
|
|
|
|
Aqualink is a GSM data logger which can be used for (AMR).
Device can be connected to any energy, water, gas or electrical meter, presure, level .... sensors.
The device is batery powered and periodicaly sends consumption data through an encrypted SMS to a processing server.
Aqualink is a low power device, intended for transferring small pockets of data from measuring devices, to the remote server. The basic device has two pulse inputs (active low with pull-up resistors), on which we can connect HRI, reed, Cybel or other measuring device with pulse output. The device is supplied from latest technology, high power LiSOCl battery, which is its only source of power and it is calculated to last six years, when transmitting one SMS message per day.
Aqualink works in two different modes. The first mode, which is mainly applied, works as a pulse counter with a very low power consumption of approx. 200A. In this mode a RTC (real time clock) is also operating. The microcontroller wakes up from sleep mode every hour to update counters and store information to memory. Also at that time the hour check is engaged and if current time (hour) matches the setting stored when the device was configured, the message composition and sending is engaged. The GSM module integrated on board is quad band and works in all continents. On the beginning of sending cycle the GSM module powers up and searches the appropriate GSM network. When it finds the network and registers to one, the SMS message is transmitted. The data in the message is encoded and holds the following information:
• current time and date
• firmware version
• GSM signal strength
• battery status
• error codes
|
|
1)Working in VHF or UHF band.
2) Excellent transmission performance, the reliable control distance in-line-of-sight > 500m
3) With embedded linear DC power source to make the RF transceiver work more stable and reliable.
4) Adopting anti-jamming circuit overcomes the interference of the relay contact fire, which makes the operation more stable and reliable.
5) LCD design and friendly man-machine interface makes the operation more visualized, convenient and easy.
. Main Functions
1) Controller unit has Bistable output with lock-type switch.
2) Handset remote control can control single or multi channels (Maximum 6 channels)
3) Address of controller units can be changed from 1 to 65534.
Present status of the controller units can be read in two-wire mode.
4) The port address of the controller units in the effective distance can be scanned.
|
|
|
The TeleChief Series TM - 2 Speed - HT is a compact, hand-held radio remote control system that is suited for (but not limited to) hoist and trolley applications.
|
|
Our Hand Held (HH) systems are designed with the primary focus on applications which require a single hand operation. The easy to use transmitters fit right in the palm of the operator's hand and are light-weight, yet very sturdy.
The push button versions are ideal for, but not limited to control hoists and monorail systems.
The toggle switch versions are mainly used for smaller sized service and telescopic cranes. In addition to digital switches, it offers a single proportional output. This proportional output is activated by a trigger or a potentiometer on the transmitter.
|
|
Push button stations for small hoist applications, for control circuits in both single or double
row versions, for control and direct switching power circuits, for tail lifts control.
|
|
|
Control Chief's Raymote® infrared technology offers wireless remote control without radio interference because of this there is no need for FCC license. Raymote® systems use infrared light that provide line of sight safety. Raymote® systems can be operated side by side without cross talk interference. For correct use of this infrared technology it is necessary to use a transmitter (style options available), an infrared sensor, and an interface module.
|
|
|
The MJ joystick controller allows the operator freedom not possible with pendant cables or fixed control panels. Versions are available with 14 to 20 channels (not including START and STOP). The transmitter may be fitted with 2 or 3 Joysticks plus toggle switches, or toggle switches only. A Data Feedback option is also available.
|
|
|
|
|
|
PRO-M
The PRO-M is a fully-proportional controller optimized for use on mobile machines. The receiver is extremely compact to fit into the limited space available on vehicles. The wide-range power supply suits either 12V or 24V vehicles, and copes easily with the harsh electrical conditions encountered. The transmitter may be fitted with up to 3 dual-axis joysticks, or 6 single-axis paddles as well as up to 12 discrete commands. The proportional outputs may directly drive either voltage or current-controlled valves, and are programmed from the transmitter using a sophisticated teach-in mechanism that can be disabled to prevent tampering.
PRO-M + KSI
The PRO-M controller may be retrofitted to machines without electro-valves with the use of the KSI control kit. The kit comprises a small self-contained hydraulic system comprising a pump, tank, filter, and proportional actuators. These small actuators connect to the control shafts of the main machine valves, and allow fully-proportional control without the cost and complexity of upgrading the main hydraulic controls.
|
|
|
a portable TRANSMITTING UNIT which communicates to the receiving unit, the sequence of digital data that is necessary for carrying out the command selected by the operator using the command devices (pushbuttons, selectors, joysticks).
|
|
|
The ZEUS M6 transmitter utilises the same transmitter body as the B2, combined with specially designed proportional joysticks for applications such as hydraulic proportional cranes, telescopic handlers, crawler vehicles and any other kind of machine for witch single-axis joysticks represent the ideal type of movement command. The ZEUS M6 console has a compact size but again, reserves plenty of space for additional on/off and proportional commands making it an easily customisable transmitter for special applications
|
|
|
|
|
|
New range of radio remote controls with joysticks, OMNICONTROL Series.
This system integrates numerous configurations and possibilities in terms of :
• number of joysticks (2 or 3)
• type of joysticks (notches 1, 2, 3, 4 speeds or proportional, with adjustment on each direction)
• type of buttons for auxiliary functions (pushbuttons, selectors with 2 fixed positions, selectors with 3 fixed positions, selectors with 3 positions and automatic return)
• number and type of outputs (up to 25 function relays and 6 analogue outputs)
Designed to facilitate the operator’s control tasks :
• ergonomic transmitters
• functions identified by pictograms
• adjustable carrying
• enhanced endurance of transmitters and fast, easy-to-replace plug-in battery
• 30 available frequencies in the 433/434 MHz band and 64 available frequencies in the 868/869 MHz band (10 mW)
The receiver is also very easy to install :
Compact receiver
Screw-type connection terminals
LCD display (current frequency, coding, activated outputs,…)
Additional function : Start-up by infrared validation
Safety :
• each transmitter/receiver set has its own specific code contained in a plug-in memory
• message quality is ensured by a high-level communication protocol
• joysticks and function buttons mechanically protected to prevent unintentional actions
• overload protection by fuses
• category 3 safety stop as per EN 954-1
• a passive shutdown device shuts down the system if the radio link is jammed
• a “dead man” function shuts down the transmitter after 5’30” if no command has been generated
|
|
|
|
Control boxes and remote controls
