|
|
| The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Cocks. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting manufacturer of valve actuator operation. |
|
The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Cocks. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation.
|
|
| The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Cocks. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting manufacturer of valve actuator operation. |
|
| The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Cocks. This rugged, feature-rich platform, offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation. |
|
Closed loop controlled current Power supply supplier included in a very compact enclosure with integrated Din track fixing system.
Current regulation based on microcontroller technology, offering accurate current output control, high level of protection against transients (short circuits & circuits opening), and very easy setting-up.
|
|
| Our FX38DBB electronic ignition Full Sequence Controller is capable of controlling two industrial burners simultaneously |
|
Operational reliability through integrally safe and stable systems
comes from a wealth of expertise in industrial burner management and
control techniques.
HCE systems are designed to optimise performance and
efficiency while maintaining operation within given classification
specifications. This is provided at all levels to suit bespoke
requirements, from relay logic controls, to integrated PLC MANUFACTURERS
systems with fail safe monitoring and multiple variable PID
control. |
|
| The Helios Technology's charge regulators are authentic "Made in Italy" products, designed and manufactured to manage the energy produced by photovoltaic modules and stored in 12 or 24 V solar professional batteries. Besides, an internal microprocessor allows these devices to control the charged/discharged state of the batteries using special algorithms which increase their average operating life. |
|
The SCR Marine charge regulator has been especially designed for the Superwind 350 wind industrial generator and guarantees optimum charging of the batteries. The secondary function of the SCR Marine is to electronically keep the wind generator under load. When the batteries have reached their maximum charging voltage, the SCR Marine´s PWM circuit automatically diverts the industrial wind turbine´s surplus power to the dump resistors. Thus with batteries even fully charged, the wind turbine continues operating and provides useable power as soon as electric consumers are switched on. This state of charge is indicated by a LED.
The SCR Marine is suitable for lead acid batteries, gel batteries and AGM batteries (AGM = Absorbed Glass Professional mat) and has temperature compensated charging characteristics. For special applications, the maximum charging voltage can be adjusted to customer requirements.
The charge regulator SCR Marine is completely sealed and effectively protectet against the marine environment.
It has two separate outputs, which can be used to charge two battery sets separately (eg. starter battery and service battery on a yacht).
|
|
Combustion control and Industrial monitoring systems
Combustion and emission control, why?
In 1997 with the Kyoto's Conference and its regulations, the Governments decided to pay more attention to the CO2 flue gases reduction.
The European target for CO2 reduction is 8% compared to the year 1990 values.
Ascon is one of the leaders of this new conscience of environmental effects, managing, energy and financial saving.
Four guide lines have been defined: energetic renewable resources , diffusion of implementations to improve the final energy use, electrical energy production, and urban road traffic reduction.
One of the most important steps is to improve the plants efficiency by means of the continuous control of the flue gases oxygen content.
This type of control enables:
combustion efficiency optimisation by means of the control of the air/fuel ratio (energy saving);
check of correct plant working under different operating conditions, simple identification of possible anomalies and then relevant corrections (safety);
reduction of Nitrogen oxide pollution (to reduce environment impact).
Remember, a correct combustion means: economy, safety, cleaning.
Clean Combustion = Energy and money saving
At present each moderate investment on this matter enables a considerable energy saving with the consequent money surplus which means a quick pay-back of the investment and more. |
|
For Maximum Combustion Efficiency Through Complete Mixing Of Fuel Gas And Air.
Selas Combustion Controllers equipped with PosiMix® Mixing Cocks are precision premix systems for blending fuel gas and air. They are suitable for most fuels, mixing them with room air and compressing the mixture to deliver a precise, preset gas/air ratio at uniform pressure to the industrial burners.
FEATURES & BENEFITS
Completely self-contained
Capacities available from 500 to over 150,000 cfh of mixture
Output pressure to 6 psi
Precise gas/air ratio maintained over a wide turndown
Available with automatic ratio control
Low installation cost - single pipe delivery system for one or more control zones
For use with any clean commercial fuel gas containing less than 40% hydrogen
Rugged - provides years of trouble-free operation
Low maintenance |
|
At ITT Water & Wastewater we produce practical and easy to use monitoring and control systems for many different pump and industrial mixer applications. Our systems offer reduced operational costs, total overview, less report handling and better environmental control.
As well as supplying the hardware, such as pump regulation, sensors, electrical start equipment and cables, we also have professional software for running the system. The ITT Water & Wastewater AquaView SCADA system provides precise and effective monitoring and control.
Each control system comes with a host of well-thought-out functions. Good examples are comprehensive pump control functionality, advanced supervision of pump condition, accurate flow calculation and cleaning functionality. All functionalities are based on international experience in municipal wastewater. |
|
Automation of pumps and cocks helps to cut costs on a permanent basis and safeguards the reliable operation of your installations.
PumpDrive is the first variable speed control system that comes in a uniform housing design for three mounting methods and offers the user a comprehensive solution across a wide performance range. It allows quick, precise and continuously variable speed adjustment of a pumping's drive. Thanks to absolutely reliable rotational speed optimization in line with demand, energy savings to the tune of 50% can be achieved.
LevelControl is an intelligent level control unit for single or double pump systems in applications that require reliable level control. LevelControl professional monitors and documents switching cycles. It ensures even distribution of pumping hours and optimum pump operation. This reduces downtime, maintenance and servicing.
PumpExpert combines three elementary functions. It is the first diagnostic system capable of issuing clear recommendations for action in the event of a disturbance or malfunction.
|
|
The Universal Power Cell uses Hall effect sensors that are not affected by odd waveshapes or frequencies. Also, no Voltage or Current Transformers are used.
The UPC is field scalable to match your pump motor. Complete information at loadcontrols.com.
The PMP-25V Pump Load Control takes the 0-10 volt load signal from the UPC, professional displays the Pump Load, and has the Set Points, Timers and Relay and Analog Outputs. |
|
The components presented here have been developed and optimised for increased requirements in close co-operation with our customers over a period of several years. ifm electronic now supplies a sophisticated control and automation system which conforms to the needs of the market. In addition to flexibility and performance attention was given to the following points:
> Operation at extremes of temperature, both high and low.
> The ability to withstand extreme shock and vibrational stresses.
> Use even with direct exposure to dirt, water and moisture.
> Insensitive to supply voltage fluctuations caused by the battery/generator systems.
> The electrical system must be insensitive to high levels of conducted and radiated interference.
> Application-related networking possible with the serial CAN bus suitable for mobile applications. |
|
The XLe compact (96x96x57) all-in-one controller comes with a 128x64 LC-Display and has full monochrome graphics capabilities. It is equipped with built-in I/O coupled with the dual protocol capabilities and optional internal telecommunication modules.
The OCS with its full IEC61131-3 integrated development environment for logic, HMI design, networking and I/O configuration is a very capable MANUFACTURERS OF PLC with full graphics capability. The operator interface used in the XLe series is a high visibility graphics monchrome LC-Display with blue LED backlight offering excellent readability to the user in the most difficult conditions.
|
|
From the monitoring-for-function of the sensors to self-monitoring Control Units, Mayser supplies the right Control Unit for every safety system. Acting as a link between the sensor and the machine control, it analyses the incoming signals and immediately triggers the required measures.
In cooperation with the Elge GmbH company, we can also supply Control Units for special safety systems and other applications.
|
|
Microvision Plus (3 axis interpolated controller)
All the power of a numeric controller with ISO programming in a cheap structure based on a RISC 16 bit processor. Monochromatic 5” display can be touch screen supplier which improves navigation making it more user friendly. Drivers can be connected to the controller either through analog +/-10 V. signals or digital PWM or Step / Direction. Besides a considerable number of I/O “on board” many other devices can be added or remoted using the 2 available CANopen serial ports. |
|
Control unit unipos C110:
- linear path controller
- CNC + SUPPLIERS OF PLC
- controls max. 9 axes, servo motors or stepper motors suppliers
- Manufacturers of dc motors on request
Control unit Unipos 120 / 220:
- Point to point controller
- Control unit to control stepper motors
- CNC
Control unit unipos 420-W:
- continuous path controller
- CNC + PLC
- Controls max. 8 axes, 4 axes simultaneous
Control unit unipos 820-W-/WH:
- CNC-Controls + PLC
- max. 64 axes with 8 NC-channels (SERCOS/Analog) |
|
This control unit serves for supplying digital detectors and for isolating MSR signals electrically. Additionally to the standard configurations for NPN or PNP drivers the device provides an adjustable pulse lengthening of maximum 60 sec. The device evaluates the signals of the sensor and at the same time provides the operating voltage for it. It has been rated especially for mounting on a 35mm top hat rail. Due to its' IP20 housing with optional top hat rail detent the device is appropriate for screwed mounting as well as for mounting in a switch professional cabinet.
Control unit 230V AC/24V DC
Control unit 115V AC/24V DC
Sensor supply 24V DC, max. 80mA
Transistor output 1 x PNP, 1 x NPN, 25mA open collector
(overload and short circuit protected)
Relias output 1 x potential free changer, max. 250V AC, 5A
Switching time per pulse, adjustable: 1 ... 10sec up to 1 ... 60sec
Operating temperature -10°C ... +50°C
Protection class IP20
Material: polycarbonate UL-94V-0
|
|
No matter what the application, Draeger's System Centers will design a industrial monitoring system for your specific needs.
Whether it is a single wall mount unit for only one or a few points, a 19" rack mounted modular controller, or a full blown SCADA system with cabinetts to house the electronics and wiring, our experienced engineers will help to design the system that fits. Even PC monitoring professional consoles with event log professional displays and zoom-in plant layouts are available from Draeger Safety.
|
|
The tenfold control unit provides 10 inputs and can be operated with all PNP-DC-sensors. The voltage supply is realised via 24V direct voltage or system voltage. The device is available in three designs. The version with reverting conductor allows the complete control of 3-phase motors. The control unit evaluates the signals of the connected sensors (max. 10). For instance it interrupts a conveyor belt manufacturer or changes its' running direction. The current state is indicated by two signal lights.
Designs:
- Standard
- Top hat rail
- with reverting conductor
Transistor output 1 x PNP, 20mA, open collector (overload and short circuit protected)
Pulse duration: 1 - 60sec
Operating temperature -10°C - +50°C
relais output: 1 x change-over contact, max. 250V AC, 5A
Sensor supply: 15V DC, max. 120mA (overload and short circuit protected)
|
|
Electronic controller mod. MILLENNIUM
Reggiana Macchine Utensili has developed its own professional software and stepping motors control, this gives the maximum flexibility, able to suit all customers needs.
Studied for Industrial applications, complete with double row back-lighted display, allows communication:
with PC,
through RS232 / RS485,
from/to SUPPLIER OF PLC,
I/O signals,
from Bar Code readers,
TXT files.
Programmable with the PC specific software or able to automatically load and run different programs without being connected to a PC, can manage all following functions:
1000 programs in memory,
texts in line, angular, mirror,
arc-texts,
serial numbers,
batches of production,
time and date,
working shifts,
customized codes,
preview, diagnostic and many more.
The excellent management of the mechanical movements allows marking:
logos,
2D Matrix and OCR codes,
fonts per dots 5x7 and 11x16,
continuous line fonts.
Low maintenance and reliable, the electronic controller MILLENNIUM is complete with all above features and can be easily connected to all accessories available, rotary and vertical automated axis, nameplate automatic loader and many others even tailored on request. |
|
TOPAX NT is a wall-mounted controller and measuring professional amplifier which has been developed on the basis of the latest microprocessor technology. It can be used for the most different tasks in swimming pool applications, professional water treatment and process engineering. With its versatile possibilities a solution is offered which stands out for its user-friendliness, interfaces and modularity.
Besides the classic water parameters such as free chlorine, pH value, temperature or REDOX potential it is also possible to measure and further process combined chlorine with the TOPAX NT. Furthermore the combined chlorine content is displayed.
Due to a graphics display the menu-driven operation uses plain text available in different languages. Trend values can be shown as curves on the display. With the help of this curves the user can set the parameters directly.
As an option the TOPAX NT can also carry out the functions of a gas warning device. The chlorine gas transducer can be connected directly.
Digital inputs at the TOPAX NT allow the user to monitor the metering performance of the pumps connected or to control professional filter flushing continuously, for example.
|
|
Piezo Electronics Solutions from PI
PI Piezo Electronics Solutions
Single- and multi-channel professional amplifiers with 60 to 1500 V output ranges
Multi-channel digital controller with dynamic linearization
Ultra-high-output professional power amplifiers featuring energy recovery and 2000 W peak power
Patented feedforward technology and digital signal processing for faster settling and higher bandwidth
Analog and digital position servo-controllers with LVDT, SGS and capacitive position sensor inputs
Modular NanoAutomation® piezo controllers with high-speed parallel interfaces
Optional opto-isolated inputs for maximum EMI immunity
Optional fiber optic interfaces for higher transmission rates
Desktop, 19-inch-rackmount and PCB-card versions as well as modular controllers
Controllers with up to 32 channels
Custom designs
|
|
DSM's linear piezo professional amplifiers, piezo drivers, and piezo controllers are high-power units used for open-loop and closed-loop servo control of piezo actuators manufacturers and piezoelectric stage systems in precision motion control and positioning applications. DSM's amplifiers and controllers are typically sold in single-channel benchtop models, but multi-channel and OEM styles are also available.
DSM's VF series of linear piezo amplifiers are voltage followers that amplifiy a low voltage analog input signal. The VF-500 amplifier provides 500 mA of continuous current (1A peak current) for piezo material rated up to 200 V. The benchtop model features an optional LCD menu-driven display and built-in waveform generator for sinusoidal output motion of an attached piezo device.
DSM's new OEM VF-90 module is compatible with National Instrument's CompactRIO and CompactDAQ platforms and is CE rated and RoHS compliant. The VF-90 provides 90mA of continuous current for voltage ranges up to 200V.
The SA series of servo amplifiers includes the functionality of the VF series and adds additional capabilities for communication, I/O, and stand-alone servo control of piezo devices. DSM has integrated the SA controller with feedback from a capacitive displacement sensor to achieve nanometer-level resolution in piezoelectric positioning stations. Communication with the SA servo amplifier is done through RS-232, and LabView *.vi files are available for control of the SA functions. |
|
|
Controllers and Regulators for specific applications
