Other controllers and regulators

Very high data rates up to 100 kHz each channel 100 kHz at 8 channels (2 each UART line), 10 kHz at 128 channels Ethernet interface for configuration and data output 1 Gig-E, TCP/IP, UDP, up to 16 MB/s Modbus TCP/IP, ASCII, High Speed ...

High-performance controller for high-speed data acquisition 100 kHz with 8 channels, 10 kHz with 128 channels Scalable to 64 DAQ modules 4 UARTs for connecting 4 x 16 DAQ modules Configurable Ethernet interface 1 GigE, TCP/IP, UDP, Modbus ...

High-performance controller for high-speed data acquisition 100 kHz with 8 channels, 10 kHz with 128 channels Scalable to 64 DAQ modules 4 UARTs for connecting 4 x 16 DAQ modules Configurable Ethernet interface 1 GigE, TCP/IP, UDP, Modbus ...

CONTROLnet is an integrated system of controls. Designed to operate, manage, and supervise every stage of the raw materials handling process. It offers you a completely new level of management capability, helping to meet the ever greater ...

OVERVIEW: The Myron L® Company’s accessory for our monitor/controller line is the Remote Alarm™. This remotely mounted AUDIBLE and VISUAL alarm connects to any MyronL Company controller, or brand “X” controller with dry contacts (requires ...

Control panel MGB-...-PN with 13 control elements, push-pull plug, connection for stack light, RC12 • Emergency stop according to ISO 13850 • 6 illuminated pushbuttons • 6 selector switch, 3-stage, illuminated • ...

• Emergency stop according to ISO 13850, illuminated • 9 illuminated pushbuttons • Operating mode selector • Connection via 7/8" and M12 plugs • including terminal plug for stack light (M12, 5-pin) • ...

Read head CES-A-LCA..., hard-wired encapsulated cable 10 m, PVC • Cube-shaped design 42 x 25 mm • Hard-wired encapsulated cable made of PVC • Cable length 10 m • Two safety screws M4x14 included Housing material PE-HD plastic ...

Measuring device for the airtight test of welding seams with pressure and vacuum Limit values / measurement times can be set depending upon the environmental conditions Printout of a complete measurement record with PC software Serial ...

VEICHI provides OEM/ODM Service for TOP Customers. GS00 Water pump integrated machine 1. Motor-drive integrated structure,convenient installation and maintenance The controller wraps the surface of the motor to truly achieve an ...

VEICHI provides OEM/ODM Service for TOP Customers. VEICHI weaving direct-drive spindle system solution, equipped with VEICHI "core" direct-drive electric spindle system, came into being for the weaving industry to enter the intelligent ...

Pressure: 0 psi - 3,000 psi

AMETEK-PMT Model 40 Pneumatic Pressure Controllers automatically position a valve or other final control element to maintain process pressure at the desired set point. The Model 40 Pneumatic Controller is trusted technology that works ...

Central control unit MV5 ZE 301 XL - Both the hand-held and table marking systems can be controlled with this central control unit - Based on a consistent modular design system - Space-saving housing - Stand-alone use - Integrated colour ...

Central control units MV5 ZE 100 XL & MV5 ZE 101 XL - Very compact design - Integrated PC functions for independent applications - Protection IP54 - DEVICENET-/INTERBUS-/PROFIBUS- or PROFINET-cards (also LWL) can be used - Integrated ...

Central control unit MV5 ZE 401 XL - Especially designed for industrial marking jobs - All components for daily marking tasks such as the power units for stepping motors, microprocessors and memories are combined on a compact control ...

Z-PASS2-RT is a state-of-the-art, highly reliable, and secure device designed to handle a virtually unlimited number of client nodes. This device features 2 analog inputs and 6 configurable general-purpose digital (DI/DO) channels, providing ...

S21N1 is a batch controller with a polycarbonate front panel 72x144 mm including 2 numerical displays 5 digit red LED high brightness, 7 LED that designate operating status, 6 keys for device’s programming and batching cycle command. ...

Z-D-IO has N.6 digital inputs, N.2 SPST relays, capacity of 2Aac, 250 Vac. It can be used as simple Input/Output module or, through dip-switches, is possible to acticate special functions to drive motors, pneumatic and motorised valves.The ...

Transponder FID data carrier as a key ring, waterproof, uncoded. Rounded version. Mifare 1K transponder.

The AMF Andreas Maier control unit is designed for plates having a power of 230 V and a current of 16 A. The whole unit features its UCS current control system and a discharge cable which are about 3m having a 10 pinplug. Plus, the DB9 ...

Control unit for a magnetic chuck. The control device has three control buttons: 1 x magnetisation (MAG) 1 x demagnetisation (DEMAG) 1 x release To start the magnetisation or demagnetisation cycle, the following button combinations ...

LIGHT AND USER-FRIENDLY ICM crawler generators are equipped with a completely removable control unit, which includes an LCD display and keypad. This pocket size Remote Control Unit – the CPRCU – provides the operator with the most ...

PERFORMANCE Specifically developed for the CPSERIES, the POWERBOX control unit does not merely represent a minor component of the new system. It is actually one of the best components! ICM has designed the first ever ‘Plug & Play’ ...

PERFORMANCE The SCU2.0 has a system for direct measurement of the high voltage delivered by the X-Ray generator to guarantee the accuracy of the radiological parameters. Based on this data the control system maintains the stability of ...

Different vacuum pumps need different feed pressure for optimum performance. A filter regulator can easily be manually set to a desired pressure level, and be used to eliminate particles from the compressed air. A pilot regulator can ...

Piab control units are fully pneumatic operated with an extremely reliable function. The full pneumatic design also removes any source of ignition from the system and at the same time simplifies the validation process. The unit is designed ...

Piab control units are fully pneumatic operated with an extremely reliable function. The full pneumatic design also removes any source of ignition from the system and at the same time simplifies the validation process. Features ...

If you are looking for a robust wellhead control system with a strong capacity for controlling components of an oil and gas well, then the DSTM with its two air driven double acting high pressure pumps and two tanks of 100 litres is the ...

The control unit is a CPU for evaluating data from image processing products. Its compact design ensures the necessary flexibility for easy, space-saving installation, for example in a control cabinet or on a wall. Quick initial start-up ...

Gessmann’s master controller system MC 01 is specially designed for usage in railway applications. Their robust design which is based on the relevant standards EN-60077, UIC 612 and EN-50155 guarantees low life cycle costs and a ...

- Advanced microprocessor and communication technology, stable and reliable, high accuracy - Relay output and 4~20mA or RS485 signal output - Auto switch for main and backup power, backup power is charged automatically - Blocks modular ...

- Advanced microprocessor technology and communication technology, stable and reliable, high accuracy - Relay output and 4~20mA or RS485 signal output panel mounting type - Auto alarm for detector failure, line failure or under voltage - ...

- Advanced microprocessor and communication technology, stable and reliable, high accuracy - Relay output and 4~20mA or RS485 signal output panel mounting type - Auto alarm for detector failure, line failure or under voltage - Easy ...

Pneumatic controls for 1,2 & 3 ways with warning light for PTO engagement or to operate over the tipping valve.

2& 3 ways pneumatic controls with warning light for PTO engagement or to operate over the tipping valve. Combined with appropriate tipping valve, enables proportional control for lowering dump bodies.

Tipping pneumatic control valves. Tandem mounting of different elements.

Today, hardly any production line in the automotive industry can do without automated conveyor systems. Electric monorail systems are proven and established transport systems for material flow in production, manufacturing and assembly ...

Today, applications in intralogistics and automotive production are subject to a high degree of automation. The increasingly complex requirements for plant flexibility present logistics planners and system integrators with ever greater ...

mäder offers for pneumatic presses various controllers. Our presses and controls are manufactured according to the valid EN standards and conform to the EC Machinery Directive 2006/42/EC CE. The electrically as well as pneumatically ...

The Curtis Model 1313 Handheld Programmer is a powerful and intuitive programming and diagnostic tool. The 1313 performs comprehensive programming and troubleshooting tasks for all vehicles that use Curtis programmable motor controllers ...

The Curtis enGage® III is a three function, microprocessor based instrument that can be factory or user defined to monitor various functions, including fuel, temperature, pressure, voltage, battery state of charge and maintenance/status. ...

Curtis Models 3140/3141 are designed to display critical vehicle and motor controller data in an easy-to-read and attractive LCD. The display includes three 10 mm digits and six 5 mm digits and all digits are in 16-segment format to allow ...

This advanced model improves upon the performance of the Light plus with increased storage capacity and the addition of a touch panel for intuitive operation. The operator can also easily enter or change precise settings and values from ...

This is the entry level model for the Handy 2000 Series. The display panel comes equipped with large 7-segment LEDs for improved visibility, and green and red color-coded judgement indicators to clearly inform the operator if all is okay ...

A dedicated interface unit for cordless tools; this model features EWT wireless transmission technology, which conforms with the international standards set forth under IEEE 802.15.4. Tools can be set up quickly and easily through infrared ...

The HVX.bms (Battery Main Supervisor) is the central control unit of the battery system. It is connected with the CAN vehicle architecture and ensures the safety of the entire battery system. Over and above this, the BMS provides the ...

These modular pressure controllers combine cutting-edge control/measurement technology, modular design, and user-friendly features. The Additel 773 controller series is optimized for low pressure work by utilizing Additel’s proven low-pressure ...

These modular pressure controllers combine cutting-edge control/measurement technology, modular design, and user-friendly features. The Additel 783 controller series is optimized for high speed to pressure without compromising accuracy ...

The Additel 793 pressure controller combines the latest control / measure technology, modular design and easy to use / maintain features into a single user friendly deice. The Additel 793 provides pressure control up to 15,000 psi (1,000 ...