|
|
| The AV 110X and AV 130X are the new generation of articulated tandem rollers with excellent compaction characteristics and maximum user comfort, designed for use on medium-sized and large construction sites. |
|
The Ingersoll-Rand DD-90 and DD-90HF vibratory asphalt steamrollers have 66 inch (1675 mm) wide professional drums and provide high performance for
highway and other large paving projects. The DD-90 has a frequency of 2,500 vpm (41.7 Hz) and a nominal capacity up to 250 tons (227 metric
tonnes) of HMA per hour. The DD-90HF, with a frequency of 3,800 vpm (63.3 Hz), has a nominal capacity up to 325 tons (290 metric tonnes) of
HMA per hour. And with operating weights of nearly 11 tons (9.8 metric tonnes), the DD-90 and DD-90HF compactors meet all state D.O.T. static
rolling requirements. |
|
DVR 85 Articulated Vibratory Roller:(Double Drum, With Operator Seat)
Operation Weight : 1570 kg
Static Lineer Load : 9.4 kg/cm
Drive System : Hydrostatic
Walking Speed : 0-7 km /h
Gradeabilty : 40 %
Service Brake : Hydrostatic
Parking/Emergency Breake: Negative
Vibration System : Hydrostatic
Centrifugal Forc
(Front- Rear) : 10.5 kN
Frequency : 50 Hz
Nom. Amplitude : 0.5 mm
Steering Type : Oscil Artic.
Steering Method : Hydrostatic
Steering Angle (+/-) : 30 Degrees
Oscillating Angle (+/-) : 10 Degrees
Drum Diameter : 580 mm
Drum Width : 860 mm
Drum Thickness : 10 mm
Engine Options :
Lombardini Diesel 23.4 HP Water Cooling
Hatz Diesel 22 HP Air Cooling |
|
Single- and double-drum vibration, dual-frequency and double-range vibration, tow-gear traveling speed and stepless speed changes
Squirrel-bag lubricating and cooling structure adopted for lubricating vibration manufacturer of bearing to prolong the longevity
Double twist joint crab sway structure, with crab sway distance between front and rear drums of 170mm, convenient for operations on close-side road
Sprinkler system with three-grade industrial filters to prevent muzzle jam and to ensure uniform and adjusted spray
Ergonomical cab design, three-grade shock absorption system, sound and heat insulation, dustproof, and warm-cool air conditioning, for comfortable operation
Twist-joint fixed safety staff, three-level braking system (traveling, parking and emergency) for operational safety, startup locking center, malfunction alarming system and gemel lock-in device for machine security;
Have been awarded 10 national patents
Standard configuration is with cab and air-conditioning. |
|
| The combi-versions are equipped with four rubber tyres at the rear instead of a drum. The rubber wheels are driven in pairs by separate propulsion motors, thus minimising the risk of damaging newly laid asphalt compound when making sharp turns. The rubber wheels ensure a denser and smoother surface on the asphalt, a feature that is sometimes required. |
|
| Combination rollers are characterized with higher climbing achievement and by a sealing of the asphaltic surface. Additionally to the standard water tanks a parting agent tank with direct printing sprinkling is installed on the tires. |
|
Our range of compacting equipment gives World-Class Compaction Performance, with a safety- and environment-conscious Design. Smooth Starts and Stops are hallmarks of our compaction equipment.
|
|
| To answer the economic constraints and environmental of the stabilization of ground or in situ bituminous mix recycling, BOMAG developed very powerful materials declined in Stabilisateur version or Industrial recycler. Stabilization is addressed on the ground rich in silts which are consolidated by the addition of a bituminous binder, hydraulic or chemical, then intended to become base courses or underlayers. This process of stabilization soil also confers a very good resistor with freezing to him. The reclyclage is intended for the rebuilding of roadway per spraying of the layers of bitumen in place which are mixed with binder before being redeposited in only one and even operation. |
|
| Compacting to specifications is critical for soil, landfill, and paving applications. Cat compactors are specifically designed for all compaction operations. |
|
| Duplex rollers are suitable for compacting thin layers on granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in confined areas. |
|
| With the choice from two amplitudes the fully hydraulic, hand-guided vibrating rollers for the nutsetter on asphalt are as optimized on free layers. The complete Seitenfreiheit permits a consolidating directly along perpendicular obstacles. |
|
| The static rollers play a vital part in our complete product mix. Many countries specify pneumatic tyred rollers to professional seal compaction surfaces, especially on runways. We offer several pneumatic tyred rollers with varying numbers of wheels and ballast possibilities to meet all requirements. The CS142 is a modern, articulated static three-drum roller with the same static linear load and drum diameter on all drums. The machine is suitable for medium-size and large-size applications. It is ideal for use in areas where the ground should not be vibrated, such as in areas close to old buildings and on bridges. |
|
The new generation of Ammann pneumatic tyred rollers has been developed on the basis of the latest findings about the compaction of bituminous asphalt layers and natural soils. The modern roller design provides 1 x 1 m visibility in front of the roller and behind it.
A wide range of additional weights can be implemented to optimise the ballasting of the 4 + 4 smooth tyres. A central tyre inflation system ensures correct tyre pressure during operation. |
|
| For surface dressing; highway and airfield construction and maintenance; special surfacing materials; proof rolling; lime and cement stabilised soils. The compaction and kneading effect of the pneumatic tyres produces excellent surfacing sealing results. |
|
The PT-240R is an 8-professional wheel pneumatic professional tire compactor. This unit is ideal for compacting Hot Mix Asphalt (HMA) and rolling chip/seal, soil cement or other stabilized soils. The PT-240R has an operating weight of 35,515 pounds
(16.1 tonnes) unballasted, variable to 52,910 pounds (24 tonnes) fully ballasted. A turbocharged four professional cylinder Cummins B3.9 professional diesel engine rated at 105 horsepower (78 kilowatts) powers this compactor. A threespeed
gearbox drives a prop shaft to a locking differential; this drives two gear transmissions to the rear wheel pairs; no chains used. Sufficient power is provided for altitude operation, rolling on steeper grades and on materials with higher rolling resistance. Rolling speed is infinitely variable up to 11.8 miles per hour (19 kilometers per hour). |
|
The internationally unique double-wheel radiant hydraulic drive wheel is adopted to make transmission system simple and reliable, and prolong its longevity;
Travel and steering system are hydraulic driven, and stepless speed change;
9 wide-base tyres have an overlapping of 68mm, with good compactness and evenness;
Full hydraulic rear wheel drive avoids impacts in startup and parking, favorable for compactness quality of road surface;
Tyres with air concentratedly filled and pressure adjustment system can change ground pressure of tyres based on the compactness of road surface. That ensures good compactness and high productivity;
Hydraulic control, electric-control throttle, spacious and clear-view cab equipped with air conditioning, for comfortable operation;
Beautiful and tasteful streamlined appearance;
Anti-dumping device, three-level braking system (traveling, parking and emergency) for operational safety, startup fastener device, malfunction alarming system and gemel lock-in device for machine security. |
|
| Dynapac rammers are suitable for applications on both granular and cohesive soils, where strict requirements are imposed for compaction in confined areas, trenches and repair work. |
|
| Rammers from Ammann will 'pave the way' on every construction site! Like all Ammann products, both the petrol rammers (2- and 4-stroke) and the diesel models feature sturdy and powerful design with impressively strong performance, plus user comfort and environmental benefits such as low noise and exhaust gas emissions. |
|
| BOMAG offers 4-stroke and diesel tampers with an operating weight of 62 kg up to 81 kg. The tampers are ideally suited for compaction in trenches and pipelines, for backfilling and foundations and for asphalt patching. |
|
Ammann aims to offer users all the benefits of modern technology, in line with constantly changing requirements on construction sites. The focus is on people: alongside high performance and efficiency, user-friendliness is a key factor in our machines.
More than 15 years ago, we broke new ground by developing hydraulically-driven vibratory plates. Nowadays Ammann is numbered among the leading providers in this equipment category. |
|
| Dynapac's range of small and medium-size vibratory rollers are used to compact all types of soil with the exception of rockfill. The rollers are suitable for most types of road construction, airfields, dam construction, harbour projects and industrial constructions. Heavy-size vibratory rollers are used for a very wide range of applications. The thickness and grade of the drum's steel are adapted for compacting rockfill, although vibratory rollers are also known for their excellent performance on other types of fill. A special version with a padfoot drum (PD) is available for compacting cohesive soils. |
|
The compact Rammax models RW 1800, RW 3005 and RW 5005 round out Ammann's range of single-drum rollers.
Highlights:
-Fully hydrostatic operation: traction drive, steering and vibration are entirely maintenance-free (except for the professional diesel engine); no V-belts, no toothed belts, no lubricating nipples and no electromagnetic clutch
-Easy to maintain: clear access to all servicing points on the diesel engine
-Comfortable driver's seat and simple, clear machine controls
-ROPS canopy with integrated loading lug as standard
|
|
Ammann's new generation of single-drum rollers combines high performance, user-friendliness and safety in a modern machine concept.
The structure of this product series offers both basic and heavy-duty versions with smooth or rammer-foot drums. Numerous options mean that the machine can be adapted to specific application areas. |
|
|
|
Compaction equipment
