|
|
Concrete mixers - Self-loading concrete mixer weighers
Excellent for the mixing of concrete, gravel, mortar...
The rotation of the concrete mixer in the mixing direction allows the loading of aggregates.
A manometer (pressure gauge) can be seen from the driver's cabin. It allows the dosage control at each step.
By keeping the mixer turning, it is possible to keep on mixing while transfering onto the delivery site.
By reversing the direction of rotation the requested quantity is discharged on the chosen place.
|
|
Volumetric concrete mixers
TRUCK MOUNTED MOBILE CONCRETE DISPENSERS - 6m3
QSRMC accreditation
Truck Mounted or Static
* Instant concrete production
* Multi- mix designs from same fill
* Exact quantity ‘drops’
* Nil slump mixes
* Simple to operate and maintain
* Optional silo for bulk cement
* Accurate control of cement to ±1%
Features of all models:
* Resettable counter to show amount of concrete produced
* Fully hydraulic operation of mixer and conveyor
* Weathertight cement bins
* Simple operator controls
* Mounted on skid base or ready for vehicle chassis
Static Mixer
Optional equipment:
* Colouring additive systems
* Mixer power swivel
* Push-button automatic controls
* Admixture systems
* Exclusive CemenTech Fibre feeder
* Water systems
* Additional Cement or aggregate bins
* Onsite commissioning and calibration carried out by qualified ARMCON personnel.
|
|
Volumetric concrete mixers
TRUCK MOUNTED MOBILE CONCRETE DISPENSERS - 8m3
QSRMC accreditation
Truck Mounted or Static
* Instant concrete production
* Multi- mix designs from same fill
* Exact quantity ‘drops’
* Nil slump mixes
* Simple to operate and maintain
* Optional silo for bulk cement
* Accurate control of cement to ±1%
Features of all models:
* Resettable counter to show amount of concrete produced
* Fully hydraulic operation of mixer and conveyor
* Weathertight cement bins
* Simple operator controls
* Mounted on skid base or ready for vehicle chassis
Static Mixer
Optional equipment:
* Colouring additive systems
* Mixer power swivel
* Push-button automatic controls
* Admixture systems
* Exclusive CemenTech Fibre feeder
* Water systems
* Additional Cement or aggregate bins
* Onsite commissioning and calibration carried out by qualified ARMCON personnel.
|
|
Volumetric concrete mixers
TRUCK MOUNTED MOBILE CONCRETE DISPENSERS - 4m3
QSRMC accreditation
Truck Mounted or Static
* Instant concrete production
* Multi- mix designs from same fill
* Exact quantity ‘drops’
* Nil slump mixes
* Simple to operate and maintain
* Optional silo for bulk cement
* Accurate control of cement to ±1%
Features of all models:
* Resettable counter to show amount of concrete produced
* Fully hydraulic operation of mixer and conveyor
* Weathertight cement bins
* Simple operator controls
* Mounted on skid base or ready for vehicle chassis
Static Mixer
Optional equipment:
* Colouring additive systems
* Mixer power swivel
* Push-button automatic controls
* Admixture systems
* Exclusive CemenTech Fibre feeder
* Water systems
* Additional Cement or aggregate bins
* Onsite commissioning and calibration carried out by qualified ARMCON personnel.
|
|
-The RC Conveyor concrete spreader are used in bridge paving and flat slab paving. It can spread in a width from 3 Mts. to 19 Mts.
-The RC Conveyor place concrete in front of the Paver Finisher by Divertar car. Divertar car speed and travel speed are variable and can be controlled from the operator's station
-Conveyor belt unit used alternatively for bed as well as slope position, with minor alteration in the pin connected bolted structure
-High production capability will spread up to 35 CuMt per hour with constant concrete supply and suitable site condition
-Conveyor with standard flange wheel runs on rail, Travel speed of each end is controlled separately. This negotiate the curves easily
-Special charging hopper to permit feeding of concrete by Transit mixer.
-The conveyor can also run bank to bank on smaller canal with suitable shute to place concrete from the canal height.
|
|
BOTTOM DISCHARGE SKIP WITH SIDE CHUTE
Lever operated with side chute
The most versatile skip with both centre and side discharge, to be used for a variety of site concrete pouring requirements. The side chute allows concrete to be poured into structures where access is a problem
With a fixed bale arm, the 116 GL skip makes the concrete pouring effortless and precised.
|
|
We are leading cement plant manufacturers from India.The technology that we introduce has its own merits. The mini cement plant has the production capacity of 50 tons per day. The plant functions with lower power and fuel consumption, which has made the production process highly economical. The plant has also helped in generating employment in the rural area.
The semi-dry process, that is employed in the plant ensures quality production with minimum level of pollution, which ultimately helps in the cause of protecting the environment.
|
|
Carsilos enhances the building workshop productivity. It is available in 3 different versions: 15, 28 and 34 m3.
Horizontal cement silo with extractor screw and electronic metering system
Electronic weighing system with load cells complete with digital instruments and automatic measuring management
Main frame complete with 4 telescopic stabilizers for loading and unloading operations from the truck. No need of other lifting equipment
Vibrators
Discharging screw conveyor
Electric control panel complete with additional emergency devices
|
|
Volumetric concrete mixers
Static Mixers
Nine models to suit every application.
Output capacities from 8m³ to 34m³ per hour, based on a concrete content of 300kg/m³
|
|
Already in the year 1888 the first BHS Twin-Shaft Batch Mixer was manufactured and filed for patent. Since then, BHS has fabricated several thousands of Twin-Shaft Mixers and is now the leading company worldwide concerning the number of machines which are installed in the concrete industry.
Our customers benefit from our wealth of experience. We offer perfected and reliable solutions based on state-of-the-art technology.
BHS supplies manifold batch sizes to cover any specific need. A wide choice of accessories and options enables us to adapt the mixer exactly to your requirements.
|
|
Twin Shaft Batch Mixer
8, 10 & 13 cu yd or 6, 7.5 & 10 m 3
Mixing System
* Reaches 85% uniformity after only 15 seconds, 95% uniformity after 30 second.
* Approximately 30% of one mixing blade rotation is exposed to ear on the mixer trough bottom.
* Crossover of two mixing circles creates a high degree of turbulence.
* The mixing arms are arranged on hexagonal mixing shafts forming an interrupted spiral to produce an intensive mixing motion.
Details
* Mixers are equipped with high-quality hexagonal shafts for optimum torsional and flexural rigidity.
* The mixer drive has a single electric motor driven reduction/timing gearbox to insure uniform distribution of power to the twin mixing shafts.
* Mixers are equipped with oversized round body discharge gate(s). This increases production capacity because more rapid discharge will yield more cycles per hour.
|
|
|
The turbomixer MT 130 E mixes water and cement. The unit is powered by an electric motor that transmits the motion to the centrifugal pump by V-belts. The electric motor is equipped with belt tension screws. The carter protects the belt/pulley unit. The turbomixer is complete with inspection door.
|
|
Mixers
Towable Mixers
Multiquip's plaster/mortar and concrete mixers are the preferred brand for contractors and the equipment rental industry nationwide because no other manufacturer delivers such an extensive range of features, quality and engineering excellence.
Portable MIxers
The portable Mix-N-Go mixers, available with polyethylene or steel drums, are ideal for jobs including small footings and bases, binding block and concrete patching. They're sturdy enough to mix 3 cubic feet (85 liters) of material.
Stationary Mixers
This 12-cubic-foot (340 liters) capacity plaster/mortar mixer is a stationary model that eliminates the bulky undercarriage on tow-behind mixers. This, along with standard forklift pockets, allows a forklift to pick up, and safely move, the mixer.
|
|
The NUVM 1.5 Compact volumetric mixer is flexible and therefore ideal for precast applications as a static unit, great for remote locations trailer mounted where it can be towed to site and reloaded, and invaluable for towns and cities when mounted on a 7.5t truck where access is a problem for larger mixers.
The NUVM1.25 can produce 1m³ within three minutes and can also be used to produce screed or mortar, with a constant production rate at any cement content.
Available as a:
Static unit
Trailer mounted*
Truck mounted**
- Suitable for small precast applications in static version
- Trailer mounted can be left on site and reloaded
- Ideal for restricted access and small loads mounted on a 7.5t truck
- Mixes 1m³ in under 3 minutes
- Can be used for concrete, screed or mortar
*Trailer weight 2000kgs, suitable towing vehicle required. Amount of material carried will be dependent on gross vehicle towing weight.
** Can be mounted to a suitable 7.5t truck.
|
|
Liebher ring-pan mixers distinguish themselves by producing the best mix quality and are available with various whirler tools.
The Liebherr twin-shaft mixers distinguish themselves via their high discharge outputs.
|
|
|
|
|
|
The structure of boom is optimized by adopting advanced designs and technologies such as finite element analysis, dynamics emulate, model analysis, sample machine test, etc. Imported high strength steel ensures high quality and reliability.
Key components such as boom and vertical column adopt overall heat treatment to control residual stress and deformation efficiently.
Through assembly welding, the vertical column is of high interchangeability.
With the proportional control technology applied in multi-valve, the change of boom’s motion speed can be changed at random by adjusting the angle of driving handle, which is of superior operating performance.
With remote control distance up to 100 meters and four optional frequency ranges, simple and reliable operation could be carried out.
Diversified installation mode of the boom includes floor type, elevator shaft type, wall type, ship mounted type and tower type.
The embedded parts can be recycled.
Two inter –locked working status of placing and climbing enhances the safety and reliability of climbing process.
The delivery pipe is made from high quality steel and adopts patented heat treatment technology with a service life twice longer than normal pipe.
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version & lateral lifting eyes
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Upright centre dicharge version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TI system are the following:
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTREGRAL SYSTEM
|
|
COLUMN SKIP WITH TI GATE & DISCHARGE HOSE
Laydown centre dischage version
Concrete skips with discharge hose is already a well-known product. For this new system suitable for the existing buckets, we managed to solve issues of leakage, security and cleanliness on the building sites. The whole system to avoid the risks of overflow and segregation is presented under the name TI concrete skip.
The pros of the TIC skip are the following:
- Loading height reduced.
- The cone, very high, enables any leakage from the gate to be directed into the discharge hose via the funnel.
- The small space between the cone and the gate prevents from suffering overflows.
- The quick release funnels have several diameter discharge hoses possibilities to give flexibility and to facilitate easy access for cleaning the gate mechanism.
PATENTED INTEGRARL SYSTEM
|
|
GEARED ROLLOVER SKIP
Laydown version
The SBC VOL skip is the right skip when flowing a concrete with a low SLUMP (up to 5 cms)
The SBC VOL Geared Rollover Skip is designed for pouring mass concrete onto shutters and also large slab areas.
The patented innovative design offers excellent accessibility where handrails and scaffolding may present a problem. Gate operation is by means of a geared hand wheel which enables precise and accurate placing.
Capacities of 1200 litres and above are fitted with heavy duty reinforced bale arms.
The SBC VOL skip sits in the horizontal position on the ground for ease the filling and reverts to the vertical when in use.
|
|
-Cement Mortar Lining Machine is used where the internal lining work of pipe underneath the ground level is being carried on
-This machine will lined the cement mortar in any pipe diameter from 900 mm to 3000 mm
-The even layer of mortar will spray by machine to the wall of pipe
-Any thickness can be achieved due to the variable speed of machine
-The machine gets the mortar from mixture of ground level by mean of speed bogi at main hole which then travel and feed to storage bogi
-The storage bogi will give mortar to main machine
|
|
|
|
|
|
THE WIDER RANGE FOR THE BEST CONCRETE:
The L&T Mixers for trucks are a real system for concrete mixing and transport according to high quality and functional standards. Each technical detail has been conceived, designed and realized in order to make the mixers work in perfect harmony with the truck chassis destined for their transport. The Mixers for trucks are an excellent instrument in the service of the modern sites at low operating costs. A wide range of capacities from 4 to 12 m3 of vibrated concrete always guarantees low tares and optimised carrying capacities.
The special design of the mixing blades guarantees a mixing homogeneity in all the drum sections, thus keeping the characteristics of the transported concrete unchanged. The L&T Mixers for trucks fully meet the DIN 1045 - DIN 459 - AS 1379 : 97/ A mdt 1-2000 norms with regard to the mixing capacity with dry feeding.
REDUCED CONSUMPTION:
All L&T Mixers for trucks are equipped with hydraulic transmissions and gearboxes that allow to reach the maximum rotation speed of the mixing drum when the vehicle is at 1500 revolutions/1' (in comparison with the usual 1800 revolutions/1'). Such a characteristic allows to diminish the fuel consumption, to reduce the wear and tear and to respect the environment (thanks to the low sound emissions).
|
|
|
|
|
|
Nurock Mixers
* Remote control with simple one switch operation
* Hydraulic mixer swivel and chute couple with 3 x 1m aluminum chute extensions providing excellent concrete placement
* Pneumatic vibrators (4 on sand hopper, 2 on cement hopper) providing positive feed of materials
* Dual admixture system, Hi and Lo flow for value added concretes
* Wooden protective boards fitted to sand and stone hoppers
* Removable hopper centre panels for aggregate use
* Trigger activated lubrication system, providing lubrication where and when it's needed without wastage
* Polypropylene water tank for durability
* Industrial polyurethane coating provides protection in aggressive environments, specially developed for off shore applications
* Stainless steel conveyor belt fittings for longer life
* Flame hardened solid steel conveyer sprockets
* Adjustable conveyer belt scraper to keep belt free from material build up
* System designed from the outset to have low maintenance cycles and uses high grade materials throughout to ensure this
Specification
Total concrete production: Up to 7.6m3
|
|
|
|
|
|
Nurock Mixers
* Remote control with simple one switch operation
* Hydraulic mixer swivel and chute couple with 3 x 1m aluminum chute extensions providing excellent concrete placement
* Pneumatic vibrators (4 on sand hopper, 2 on cement hopper) providing positive feed of materials
* Dual admixture system, Hi and Lo flow for value added concretes
* Wooden protective boards fitted to sand and stone hoppers
* Removable hopper centre panels for aggregate use
* Trigger activated lubrication system, providing lubrication where and when it's needed without wastage
* Polypropylene water tank for durability
* Industrial polyurethane coating provides protection in aggressive environments, specially developed for off shore applications
* Stainless steel conveyor belt fittings for longer life
* Flame hardened solid steel conveyer sprockets
* Adjustable conveyer belt scraper to keep belt free from material build up
* System designed from the outset to have low maintenance cycles and uses high grade materials throughout to ensure this
Specification
Total concrete production: Up to 9.2m3
Aggregate: 11.5m3
Cement: 2.4m3
Water: 2000 Ltrs
|
|
SW5317GJB Main Specification
Drum Capacity 12 m3/14 m3
Engine Model Steyr WD615.69
Rated Power 247 kw
Drvie Model 8 x 4
SW5317GJB adopts advanced design. On the basis of integrating the advantages of various mixers home and abroad, with optimized CAD, the mixing drum is divided into three sections in the shape of a pear. According to the moving pattern of concrete inside the mixing drum, different section is made of quality hard wearing 16Mn steel plate with varied thickness, lengthening the service life as well as achieving synchronous wearing of the mixing drum body and blades.
|
|
- Model: AM6 FHC
- Nominal capacity: 6 m3
- geom Volume: 11.700 L
- F illing ratio: 51,3 %
- Water Line: 7.100 L
- Drive: PTO
|
|
- Model: AM10 FHAC
- Nominal capacity: 10 m3
- geom Volume: 17.310 L
- F illing ratio: 57,7 %
- Water Line: 11.080 L
- Drive: PTO
|
|
|
Liebherr build truck mixers to-measure. In accordance with customer requirements regarding chassis, nominal size, design, paintjob and accessories, Liebherr provide a tailor-made solution to every type of application. Advantages of the Liebherr-truck mixer amount to an optimum utility value for more profit.
|
|
The BHS Twin-Shaft Continuous Mixer represents an effective and reliable solution for continuous mixing processes, particularly with a high proportion of aggregates.
The mixer is suitable to produce aggregate mixes, RCC, landfill sealings, lean concrete etc.
Notable features are reduced wear, simple maintenance and low energy consumption.
The cured material on the trough wall serves as a wear protection. You just have to readjust the mixing tools from time to time. As an alternative we also offer hardcast tiles as wear protection or a rubber trough.
|
|
|
|
Concrete plants, Concrete mixers, Concrete pumps,...
