Shears, Shearing machine

139 companies | 434 products
Filters
  • What’s new?
    Submit

The C 4700 pneumatic shears are manufactured by Bliss - Bret. These pneumatic...

{{productDetail[8376]}}

Features:

- Pivot mounted (standard)...

{{productDetail[36125]}}

If you are looking for a productivity advantage and are processing materials in thicknesses from .008" to .250", coil strip widths up to 84", coil weights up to 75,000 pounds, and coil processing...

If you are looking for a productivity advantage and are processing materials in thicknesses from .008" to .250", coil strip widths up to 84", coil weights up to 75,000 pounds, and coil processing...

{{productDetail[111963]}}

Our C-Series Rebar Shears are designed with job site or shop use. Each...

{{productDetail[64491]}}

VAS CPP - VAS CPPH

Mechanical or hydraulic cutter-punch for DIN profiles.
Clean...

{{productDetail[16433]}}

Alligator and guillotine style shears for every application. Nobody knows alligator shears better....

With 12” wide (300mm) shear blades – 4 sided reversible. Supplied as standard with 12” wide (300mm) x 5 foot (1520mm), powered in-feed, drop down roller conveyor, hydraulic cylinder with hold down device on exit side of shear head.

Shear head fabricated from heavy structural components and plate to withstand continuous work on shearing high tensile steel bars.
Supplied...

Fully rebuilt shear with EATON air clutch and brake assembly installed with new electric and air controls (including starting panel, air valves, filter and...

Economical portable rebar shears for easy,
fast cutting of sceel bars with foot and hand controls.
Rebar is easily fed from the side or dropped in from above.

Capacity: High tensile rebar
(Grade 60 - 120,000 PSI tensile or 85 kg/mm2 tensile)
#8 1 25M, 3 x #5 (5/8 - 15 mm), 4 x #4 (1/2)
Approx. 1 x 26 mm, 2 x 18 mm, 3 x 14 mm
Horizontal cutting stroke.
Up...

Capacity: approx.
1 x #8 (25M),2 x #6(20M),3 x #5(15M),
4 x #4, 5 x #3(10M)
- high tensile steel @ 120,00 PSI tensile or 85 kg/mm2
Horizontal shearing action
Safety cover over shear head
On wheels for...

{{productDetail[67327]}}

Standard equipment

Swing beam hydraulic shear.
Heavy duty, rigid all welded steel frame.
Material Hold-down pressure adjustment proportionally to cutting pressure.
Colour Touch Screen 10,4.
...

{{productDetail[33341]}}

The body of the machine manufactured in steel construction and its tables were designated...

{{productDetail[118603]}}

Efficiency in a small metal shear

This small...

Small, mobile, powerful

This alligator shear is ideal...

Mobile and powerful

This alligator shear handles variegated materials like...

Robust and versatile

The robust alligator shear 407 has especially been designed for heavier material...

{{productDetail[81695]}}

Production system for stamping and...

{{productDetail[35185]}}

linear guided
CNC touch screen D-touch 7: back gauge, cutting angle, cutting gap, cutting length, quantity,...

NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port
motorized back gauge 1000 mm on ball screws, folding upwards
clear control panel mounted on moveable...

manual back gauge
squaring arm
2...

NC-preselection system ELGO
motorized back gauge 750 mm on ball screws
light...

{{productDetail[32463]}}

CINCINNATI Hydraulic Shears provide power and high value for low-cost, dependable shearing and are available in standard capacities for cutting 10 gauge up to 3/4" metal plate.

All steel interlocked construction improves reliability by eliminating stresses inherent with welded joints. Clevis mounted "swivel...

CINCINNATI Mechanical Shears are available in standard capacities...

Portable machine controls are pedestal mounted for easy, convenient operation. The power-operated backgage with digital control enables accurate setups to be made quickly.

Electronically variable rake and cut length...

{{productDetail[101435]}}

When a small fabricating shop is looking for new ironworker, two needs come to the front; floor space and cost. The SW-44 takes care of both problems. The small foot print allows it to fit just about anywhere and the cost makes it very attractive....

The SH-5214 hydraulic shear from Baileigh Industrial is a machine that should be in every sheet metal fabrication shop. This 52 shear will cut 14 gauge mild steel over its full length and operates on 220 volt single phase power. The SH-5214...

Baileigh Industrial's SH-5216A sheet metal air shear is the perfect for any fabrication or HVAC shop where 16 gauge or lighter material needs to be sheared. The SH-5216A air shear has a capacity of 16 gauge mild steel and will cut up to...

{{productDetail[17810]}}

One of Engel's most economically priced lines, the Blank-it line offers a fully hydraulic flying shear with output rates approaching 100 feet per minute and allows you to shear in slow speed for...

{{productDetail[21137]}}

The Patented configuration of this 50 ton Ironworker with the built in Press Station makes it one of the most versatile...

75 Tons of pure, solid power! The Patented configuration of this Ironworker with the built in Press Station makes it one of...

At 120 Tons, this one is huge! 1″ shearing and punching capacity! The Patented configuration of this Ironworker with the built in...

{{productDetail[113373]}}

AUTOMATIC VENEER GUILLOTINE - MOD. 'IT/310'

* Mechanical movement of the cutting blade
* Veneer hold-down bar hydraulically driven
...

HYDRAULIC VENEER GUILLOTINE - MOD. 'G/310'

* Hydraulic movement of the cutting blade
* Veneer hold-down bar hydraulically driven
...

{{productDetail[66208]}}

The Compact 40 is the most compact steelworker in the range of hydraulic steelworkers.

These machines are built using the long experience gained in the manufacturing and...

The Compact 45 and the Compact 60 are universal and compact hydraulic steelworkers with 5 workstations and are developed for production purposes with maximum...

The Compact 45 and the Compact 60 are universal and compact hydraulic steelworkers with 5 workstations and are developed for production purposes with maximum...

The Multi Range of 60 up to 175 ton machines are in the Kingsland tradition of well engineered, robust steelworkers, built for a long working life.

These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted holddowns at all five work stations to safely control the operations....

{{productDetail[69795]}}

The NC-control centralized operation panel on the front
The back stop position, the blade gap and...

{{productDetail[100741]}}

Our shear pendulum are undoubtedly the product of many years of experience and research, with the collaboration of other companies have achieved a simple but effective shear, but with...

VERTICAL SHEAR CUTTING ANGLE AND C.N. VARIABLE

THESE MACHINES ARE QUALITY EZCELENTE,

VERTICAL CUT IS ON THE SWING

THE FOLLOWING FEATURES WHY IS IT WORTH PAYING A LITTLE MORE.

VERTICAL CUT, IS CUT CLEANER,...

These machines now only used for small thickness and its main feature in relation...

These machines are manually operated and the court
produced...

2-cylinder 2 JOBS TO PUNCHING CAPACITY ø100 mm STANDARD,
AWIDE...

{{productDetail[69676]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation