Shears, Shearing machine

128 companies | 414 products
Filters
  • What’s new?
angle marking, punching, drilling, shearing line - 44 - 110 t, min. 90 x 90 x 9 mm | A series

Angle line- solution from Ficep has provided an opportunity not only for processing angle but for flats and channels. It can be used for shearing, notching,...

angle marking, punching, drilling, shearing line - 72 - 110 t, min. 120 x 120 x 13 mm | HP-T series

The new HP-T series of the Ficep CNC angle line represents an excellent solution for use in demanding environmental conditions of pylon building. This...

angle marking, punching, drilling, shearing line - 72 - 110 t, min. 160 x 160 x 16 mm | L-T series

Using the traditional cutting technique called "the FICEP double cut shear", the Ficep CNC angle line model L gives the ability to process long bracing, diagonals and webs. This shearing...

angle punching-shearing machine - max. 121 t, max. 200 x 200 x 20 mm | TIPO D series

Structural steel job needs an enormous amount of plates and details intended for use as bottom plates, fin plates, gusset plates, stiffeners and several other link plates. These plates are usually bulky and approximately punched, punctured...

angle marking, punching, drilling, shearing line - 350 x 350 x 40 mm | HP 35 T

The Angle Drill Line serves as a solution for milling, drilling, scribing and slotting purposes. Its angle drilling can also be merged with disc and carbide disc...

{{productDetail[14587]}}
hydraulic-electric shears - 2 050 - 6 500 mm | M-shear

SafanDarley M-Shear multifunctional shears stand out due to their unique hybrid drive. Advanced electronics is used for controlling the strong hydraulics.

In comparison to hydraulic shears, very little oil is consumed by the M-Shear. Significant savings in energy as well are lower wear are provided due...

hydraulic-electric shears - 3 100 mm | B-shear

The primary reason for the uniqueness of this competitively priced shear is its unmatched hybrid drive. The powerful hydraulics are governed by superior electronics. The SafanDarley B-Shear utilized substantially less oil than other hydraulic shears in its segment. The servo electronic...

electrical shears - 1 250 - 6 050 mm | GS-shear

This multi purpose and heavy duty shear outweighs in sustainable process dependability. One of its unique features is the oscillating cutting beam with corresponding clearance angle, which results in an increased life term of the blades. Furthermore, this machine has no other moving components that...

{{productDetail[57506]}}
electrical shears - 1 250 - 6 050 mm | GS-shear

The automatic lines in this product series are useful for cutting square or round bars by shearing. In addition to this, the mechanically driven shears are incorporated and...

{{productDetail[68673]}}
angle marking, punching, drilling, shearing line - 70 - 220 t | V550

The V550-6 is engineered as a high pressure punching and shearing machine for flat and angle figures. It can be supplied with several shear options to accommodate practically...

angle punching-shearing machine - 110 - 500 t | V505T

The V505T punching and shearing machine has been specifically designed to drill, punch and shear angles. Quick installation and a small footprint are ensured...

angle punching-shearing machine - 70 - 245 t | V505M

The Voortman V505M is a punching and shearing module with a compact all-in-one frame. It is designed specifically for flats...

{{productDetail[22084]}}
angle shears - 200 mm, 90° | FA series

The notching appliances from Amada have been intended to convene the quality and output requirements for sheets with thickness...

hydraulic shears / CNC - 3 050 - 4 050 mm | GS II series

The 50 years of experience Amada has are directly reflected in the benefits associated with the use of the GS II. First of all, the robust and ergonomic design will stand out from the start, but the suitability for various large...

hydraulic shears / CNC - 3 050 - 4 050 mm | GX II series

The GX II is a completely automated shearing machine manufactured by Amada. It consists of adjustable cutting angle, blade clearance and backgauge positioning suitable...

angle shears - 200 mm, 30 - 140° | VA

The machine was developed to make acute or obtuse notches. Each cut, regardless of angle can be made in a single operation.

The...

{{productDetail[8254]}}
angle punching-shearing machine - max. 2 500 x 1 250 mm | Shear Genius® SGe 5

As most fabricated sheet metal components are rectangular, a highly economincal method of production is required. This is achieved by first punching and then shearing the components loose with an integrated right angle...

angle punching-shearing machine - max. 4 300 x 1 565 mm | Shear Genius® SGe 6/ SGe 8

Shear Genius® models SGe6 and SGe8 provides more capacity, quality and cost efficiency for flexible sheet metal working than any other comparable system. Experience since 1987 and over 2200 delivered Shear Genius® units delivered around...

angle punching-shearing machine - max. 4 300 x 1 565 mm | Shear Brillance

The onsite shearing and punching technology results in a single machine that has the ability to convert a full sized sheet into finished parts, while separating the scrap. These parts can then be transferred to the last stage of production without any secondary...

{{productDetail[9328]}}
guillotine  shears / hydraulic / CNC - 3 100 - 6 100 mm | CNC HVR series

Excellent cut, perfect speed;
It can cut all kind of metal sheet to maintain the highest production capacity with maximum precision and quality.

Ermaksan, known as one of the top world wide...

swing beam shears / hydraulic / CNC - 3 100 - 4 100 mm | HGD series

ERMAKSAN, know as one the top world wide manifacturer in sheet metal industry, proudly announces its latest shear model to the market, which...

guillotine  shears / hydraulic - 2 100 - 4 100 mm | HGS-A series

ERMAKSAN, known as one the top world wide manufacturer in sheet metal industry, proudly announces its lates shear model to the market, which we call it hydraulic Swing...

guillotine  shears / mechanical - 1 400 - 3 100 mm | GMR series

ERMAKSAN quality and experience one the the production of sheet metal working machinery has proven it to type Guillotine Shears (GMR).

The static...

punching-shearing machine - 50 - 110 t | EKM series

EKM series IronWorker is renewed as a result of Ermaksan engineering studies while it is designed with 3D CAD software and manufactured...

{{productDetail[33323]}}
punching-shearing machine - 360 kN | MICROCROP 36

Ironworker - one cylinder punching machine with 3 work stations:
punching
shear...

universal punching-shearing machine - 450 kN | MINICROP 45

One cylinder universal ironworker with four work stations:
punching
notching
shear for flat bars shear L profiles
cutting of round and square bars
Patented L...

universal punching-shearing machine - 450 kN | MULTICROP 45

Designed by GEKA, the MULTICROP model not only includes all of the features...

hydraulic punching-shearing machine - 550 kN | HYDRACROP 55/110

Two hydraulic cylinders ironworker with two simultaneous work...

hydraulic punching-shearing machine - 800 kN | HYDRACROP 80/150

Working with two simultaneous work stations and five work stations the two hydraulic...

{{productDetail[16797]}}
circular shears / automatic - max. ø 1 800 x 10 mm | 1800/10

Special shear for the cut of discs with fixed tailstock to clamp the square sheets and mouvable...

circular shears / automatic - max. ø 1 050 x 3 mm | 3/1000

Lucas' 3/1000 Trimming Beading Machines are circle shear devices that are generally used for operations that involve sheet metal disks, and fields of application that include stamping and plate turning industries. The machines...

flanging machine shears - max. ø 1 300 x 3 mm | 3/1300

This circle shear is particulary suitable to cut small circular pieces. The part is loaded and unloaded manually. Upper blade hydraulic downstroke with micrometric adjustment quick-slow device. The upper and...

flanging machine shears - max. ø 1 800 x 5 mm | 5/1800

This circle shear with circular blades, particularly suitable for cutting and beading (on request) of circular parts. Hydraulic clamping of the sheet. Model with hydraulic descent of upper blade, provided with slowing-down device for the execution of parts which require...

flanging machine shears - max. ø 2 600 x 6 mm | 6/2600

This circle shear with circular blades, particularly suitable for cutting and beading (on request) discs or circular rings. Model with hydraulic clamping of sheet and descent of upper blade, on request this may be provided slowing-down device for beading operation or for a slow cutting of pieces which require the...

{{productDetail[38918]}}
universal punching-shearing machine - 45 - 110 t | HPS serie

Universal Machining Operations at 5 Work Stations

• Punching
• Cutting
• Notching

Flat Steel Cutters
• lower knife provides 4 cutting edges
• table with angular and linear stops

Angular...

hydraulic shears - 2500 - 4000 mm | KHT F serie

Rigid, reliable and user-friendly

E-20+ control - easy to program rear stop and kerf setting
• machine frame and cutter bar are designed with extremely solid, carefully machined weldment structures to withstand highest loads
•...

hydraulic shears - 1350 - 3050 mm | KMT serie

• heavy steel weldment construction for maximum stability
• quiet drive with brake motor; all components run on maintenance-free bearings
• parallel knife guides ensure high cutting precision
•...

{{productDetail[27150]}}
hydraulic shears - 1350 - 3050 mm | KMT serie

Butech Bliss Shears can be powered by either hydraulic or electromechanical systems. Hydraulic shears are a relatively low-cost option, and are best used in cropping applications. Electromechanical shears from...

{{productDetail[102135]}}
flanging machine shears / double head - max. ø 165 mm | BODYPACK 1

The Soudronic Group offers the combination machine CAN-O-MAT for medium and high-speed and the Bodypack for low speed applications.
CAN-O-MAT

The technologically mature CAN-O-MAT system features high-level modularity and process capability, and is suitable...

punching-shearing machine - max. 1040 mm

The scroll shear is capable of producing straight trimmed or primary scrolled strips for end production. Unlike the slitter system, which has rotary cutters, it is a stamping shear.

The...

{{productDetail[20730]}}
guillotine  shears / hydraulic - 190 - 2 800 kN | CI series

An optimal synthesis between the strength and precision of the mechanical engineering and the technological innovation in the hydraulic and electronic management.
To start off on the right foot...

{{productDetail[24601]}}
guillotine  shears / mechanical - max. 3 x 3 100 mm | MS series

All-in: Hi-Speed, Accurate, Efficient, Performance​

All-in : Hi-Speed, Accurate...

swing beam shears / hydraulic / CNC - max. 20 x 4 100 mm | SBT series

Heavy duty, robust swing beam cutting for optimised cutting parameters​

Worlds heaviest and most robust...

hydraulic shears / CNC - max. 25 x 10 100 mm | VS series

Cutting angle and blade gap Automatically CNC adjusted for flexible and precise cutting processes​​

Solid design & durable body for precise cutting results
Blade...

hydraulic punching-shearing machine - IW series

The DURMA Hydraulic Ironworkers are designed with multi-functions to save labor, time energy and cost. DURMA Ironworkers are well engineered, maximum efficiency and...

{{productDetail[40940]}}
circular shears - max. 10 mm | CB series

FACCIN is the ideal partner when investing in a modern dished end fabrication line. Over 30 years experience and a long line of satisfied customers is your guarantee for the quality of the product.

Our many installations are...

{{productDetail[14095]}}
hydraulic shears - 0.25 - 14 mm

A blade system run by a lateral hydraulic cylinder
The Fives shear features a special design and...

{{productDetail[62063]}}
guillotine  shears / hydraulic - 3 000 - 12 000 mm | HSL(X)

The HSLX shears are just like our TS shears guillotine type shears. This means that the cutting action is a scissors cutting action. The hydraulic cylinders on the HSLX shears are positioned directly above the ram and push the...

guillotine  shears / hydraulic - 3 050 - 4 050 mm | HSL(X) series

HSL series hydraulic guillotine with automated blade gap adjustment.

The HSLX series are our fully automated shears.

The HSLX shears are just like our TS shears a guillotine type shears. This means that the cutting action is a scissors cutting action.

The hydraulic cylinders on the HSLX shears are positioned directly above...

guillotine  shears / hydraulic - 2 050 - 3 050 mm | TS(X) series

TS series budget friendly Hydraulic guillotine with manual blade gap adjustment

Our TS guillotines are the most budget friendly machines in our shearing line.

The TS machines are guillotine type shears. This means that the cutting action is a scissors cutting action.

The hydraulic cylinders on the TS shears are positioned directly...

swing beam shears - 4 mm | SST series

The SST model is our high speed shear. The swing-beam movement of the cutting beam with a small rake angle ensures optimum quality of the cut and minimises the distortion of the sheet, even when cutting narrow strips.

This...

{{productDetail[9346]}}
angle marking, punching, drilling, shearing line - 160 ×160 mm | KPSA 167

High Performance Punching-Shearing Machine for Angle Steel

Capacity Range...

angle marking, punching, drilling, shearing line - 200 × 200 mm | KPSA 207

Powerful Punching-Shearing Machine for Angle Steel

Capacity Range (w x...

{{productDetail[5482]}}
electrical shears - max. 15 mm | CS

Copper shear CS to cut copper without waste.

Shearing capacity: 200 mm x 12 mm copper bar or 150 mm x 15 mm copper bar
max....

swing beam shears / hydraulic / CNC - max. 20 mm | G-Cut® CNC series

Advantages of Boschert - Gizelis swing beam hydraulic shears

-Heavy duty frame ensures maximum stability regarding the blade gap and minimum frame deflection. All Boschert - Gizelis shears include extra welded frame on the front, and heavy duty upper blade carrier with closed tube type construction

-Back gauge retraction...

{{productDetail[16532]}}
guillotine  shears - 6.35 - 13 mm | CS series

* Ideal for general shearing applications
* Cost competitive quality and reliability
...

hydraulic shears - 20 - 40 mm | MVS series

Based upon LVD's robust MVS design
'Configurable' specification at order to suit your custom shearing demands
Up to 40 mm (1.57") by 14 metre (551.18") capacity
Robust frame design minimises...

guillotine  shears / hydraulic - 6.35 - 8 mm | MVS series

* Ideal for demanding jobbing shop applications
* Robust frame design minimises deflection whilst cutting
* Simple and fast to learn, new operators...

{{productDetail[16531]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation