|
|
- Air cushion transporters of all sizes, up to a load of 1000 tons, with friction wheel drive and automatic , proportional air volume regulation of the air cushions and with the following options:
+ direct or remote controlled
+ wireless with infrared - or radio control unit
+ full automatic with induction loop or passive guiding tape
- Air cushion special equipment and devices (also for explosion-protected areas)
Here are some examples of our products based on air-cushion technology:
-Scissor lifts
|
|
LIFTING TABLE WITH BELLOW
Lifting table with manually swiveling plate and bellow the ease the handling of stacked items in one or two containers.
Main characteristics of the platform with bellow shown on the photo :
Lifting capacity : 2000 daN
Platform dimensions : 2,400 m x 1,600 m
Collapsed height : 0,440 m
Vertical stroke : 0,160 m + 0,500 to ease the maintenance
Mechanical drifting of the swiveling plate every 180°C.
Basic frame with two fork pockets to allow the entire unit to be lifted and moved by fork truck.
Feeding : tri-phased
Main options : motorized swiveling plate, manual or powered mobility on ground or on rails, galvanization, radio-control.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Industrial forge, mechanical engineering, cars and all kind of industries mass-producing items. Stacking and un-stacking parts to fill in or to empty containers....
|
|
|
|
|
|
The mechanical flat belt lift table is equipped with independent safety belts which travel with the table during standard lifting operation without being subject to stress. This solution with patented mechanics fully conforms to the safety regulation in accordance with DIN EN 1570. Maintenance has been minimised by the use of wear-free parts and the operating life of the lift table considerably increased. The durability of the flat belts is guaranteed by the rubber coating of the steel cord tension members which optimally protects them from external influences. Neither retensioning nor lubrication is necessary.
Moreover, BELT-LINE impresses with its harmonious, uniform motion paired with high lifting speed and precise positioning accuracy. Particular emphasis was placed on developing and excellent load change behaviour so that the behaviour of the BELT-LINE resilience path is surpassed only by LAWECO’s own push-pull chain lift tables. As noise protection is becoming increasingly important and has been required by EU directive for a long time, the exemplary smooth running characteristics are another point in favour of BELT-LINE. The flat belt mechanics with coated tension members have a clear advantage with regard to noise over other systems, even hydraulic lift tables.
|
|
Our goods only lifts are used in the industry to provide transport solutions for load shuttling between different levels.
The regulations for these lifts are far less constraining than those for goods lifts allowed to carry personnel.
Our lifts are CE certified, they comply with Machine Directive 98/37/CE and norm project PR EN 81-31.
Our lifts can be delivered with a self-bearing frame. A shallow pit allows for the cabin floor fitting at ground level. Some lifts can be fitted on the ground, with access through a ramp.
A 3D drawing is supplied for the integration of the lift in your building.
We can of course supply all peripheral protections, servo-driven doors and gates, carry out the installation, trying out as well as the maintenance (maintenance contracts).
In order to meet most of your requirements, this range of products can operate with 3 different technologies: column hydraulics, scissor hydraulics and electric winch.
|
|
These lifts use a column mounted to the freight hoist skeleton to attach and elevate the lifting platform
* Can be installed as either freestanding or fitted into an existing shaft
* Column lifts can be 1, 2 or 4 pallet capacity
* Comply with Australian Design Standards
* Available with multiple door configurations
* Unique Safetech control board provides maintenance and diagnostic feedback
|
|
Our goods only lifts are used in the industry to provide transport solutions for load shuttling between different levels.
The regulations for these lifts are far less constraining than those for goods lifts allowed to carry personnel.
Our lifts are CE certified, they comply with Machine Directive 98/37/CE and norm project PR EN 81-31.
Our lifts can be delivered with a self-bearing frame. A shallow pit allows for the cabin floor fitting at ground level. Some lifts can be fitted on the ground, with access through a ramp.
A 3D drawing is supplied for the integration of the lift in your building.
We can of course supply all peripheral protections, servo-driven doors and gates, carry out the installation, trying out as well as the maintenance (maintenance contracts).
In order to meet most of your requirements, this range of products can operate with 3 different technologies: column hydraulics, scissor hydraulics and electric winch.
|
|
|
Pflow Industries has the engineering capabilities, experience and technical know-how to solve a myriad of vertical lifting problems. We have designed custom vertical lifts to move materials that weigh 10 lbs. to over 100,000 lbs with carriages from 30" x 30" to 30" x 30". vertical heights from 4' to over 200'. We have built large load work platforms, over and under equipment for assembly lines, hopper transfer systems and more. Pflow offers complete single-source responsibility for system design, installation and total support for all components including conveyors, VRCs, and programmable controls.
|
|
The wide range of Bolzoni lift tables, with their usual safety and reliability features provide an effective solution to most lifting problems. Vertical double scissor lifts allow to achieve greater stroke without increasing the platform size are mainly used to transfer goods from one level to another.
Capacity from 500 to 3000 kg and wide range of accessories availabl to meet specificic requirmentes and customised solutions and to achieve eaven higer safety functions where conditions require.
Our tables comply with the European Safety of Machinery standards EN 292, Machinery Directive 98/37/EC and Safety requirements for lift tables EN 1570.
|
|
Scissor lift tables from Sax Lift are of very high quality and all safety features are included. All Sax Lift scissor lift tables comply with EU requirements EN 1570 and are CE marked to confirm that the scissor lift tables are manufactured in accordance with applicable CE directives for scissor lift tables.
Scissor lift tables can be delivered either as a standard lift table or as a bespoke lift table which is made to order for a specific use.
There are 4 different types of scissor lift tables. Lifting tables can be Single scissor lift table, double vertical lift table, double horizontal lift table or super low lift table.
Double vertical lifting tables are used for heavy and very high lifts.
|
|
Standard and custom table solutions
up to 10 t load, up to 8 m lift
High positioning accuracy and repeatability over the entire lifting stroke
Extreme rigidity of the elevating platform, even where transverse loading occurs due to the design with 4 independent scissor arms and the provision of a scissor pivot bearing point at each corner of the upper frame.
Short assembly and maintenance times
Linear driving load and lifting speed
Optimised power requirement
Construction with spindle, belt or hydraulic drive
Durable welded structure
High service life, even under rough, continuous operation
Rapid interchange of all drive components
All bearings are lubricated for life
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
Numerous accessories and special designs round off the product range
|
|
|
Double Pantograph lifts provide their operators with a high traveling and adjustable work platform. These units also utilize a minimum amount of floor space. This style of lift allows a standard platform size with larger travel. This family incorporates the Autoquip Standard of Quality that is respected worldwide. They bring the work to the worker and increase a workstation's productivity.
|
|
APPLICATIONS
Personnel work platforms
Freight lifts between floor levels.
Mezzanine lifts,
Automated palletising systems
Positioning test apparatus or tools.
These tables are available up to 4000kg capacity and 4000mm of lift. Contact Safetech for applications outside this range.
|
|
Features:
500 - 2000 lb capacities
30", 36", & 48" vertical travel
Standard hand control
Optional foot control available
Internal 1/3 HP 115/1/60 power unit
Lift time start at 5' per minute
Optional power units available
Hinged platform allows for easy access to cylinders and power unit in the collapsed position
Custom designs available
|
|
Spacesaver Lifts
LSH Spacesaver lifts can be used as personnel work platforms,
as cargo lifts, between levels as mezzanine lifts, and for positioning
test apparatus or tools. These lifts are available with vertical travel
up to 12 feet. Capacities range from 1,000 to 12,000 pounds.
|
|
|
|
|
|
LAWECO guaranteeing their customers 'short notice' deliveries within a maximum of four weeks as from January 2002. Not only has the price level been kept unchanged for the majority of products, but quality and safety further improved. This holds especially true for the optimised maintenance free roller bearings. The exclusion of the less costly bush bearings entails a significantly longer operating life and a higher degree of utilisation. The self-contained base frame of the lift table does not require subsequent grouting, thus offering an unrivalled quality standard with its torsion resistant frame construction
LAWECO supplies the scissor arms exclusively of solid material instead of frame sectional steel in order to improve the stability and robustness of the lift tables even more. Freely adjustable limit switches leave the operator with more flexibility and permit him to universally use the lift table within its useful stroke. The maintenance supports are designed for the individual maximum load. The comprehensive installation kit, comprising of dowels, setting screws, shims etc. is included in the price. The li
|
|
|
|
|
|
The Roto-Max was designed from the ground up with the operator in mind. The Roto-Max electric hydraulic work positioner places the load at the operator to determine where he or she would like the work load positioned.
t doesn't matter how short or tall the individual is since the operator determines the most comfortable working height. The Roto-Max allows complete flexibility to do the ergonomically safest job with maximum efficiency.
Whether the load is one pound or 3,500 pounds, the positioner height does not change until the individual wants it to change.
With a lowered height of only 6.5", an operator has easy access to the top layer of product. The raised height of 32.5" (plus pallet height) is ideally suited for most applications.
The 43" diameter top rotates easily, thus giving the operator access to product without having to stretch or walk around.
The high performance electric 1 & 1/2 hp motor runs on a standard 20 amp 115 volt single phase circuit.
Roto-Max has a capacity of 3,000 lbs. with a 14 second lift speed (RTMX-30). The high speed model (RTMX25HS) has an 8 second speed and 2,500 lbs. capacity.
A magnetic backed control box is standard and a foot control siwtch is available as an optional item.
|
|
|
Presto Lifts offers an unmatched selection of lift table styles, configurations and capacities. In addition to our standard product offering we routinely create custom modified units to suit special requirements.
|
|
Elevator electric & pneumatic
Loads 200Kg, 350k, 500Kg
Elevators has pallets electric & hydraulic has chains or has screw
Loads 800Kg, 1200Kg, 2000Kg
|
|
|
The Freightlite is a proven winner. It is made to smoothly and economically move loads weighing up to 6,000 lbs. from one story to another. - typically to and from a mezzanine. The Freightlite is one of the best values in the industry. There is no installation and set-up is quicker than competitive models.
|
|
GOOD-LIFT
Transfer of loads between a parking and an outside basement. The column lift unit is embedded in a metallic wiremesh cage self-supporting shaft and hot deep galvanized.
Door is equipped with an electro-mechanical interlock, control box and access ramp.
Main characteristics of the good -lift shown on the photo :
Lifting capacity : 2500 daN
Platform dimensions : 1,500 m x 1,500 m
Collapsed height : 0,210 m
Vertical stroke : 3,150 m
Main options : high speed lift, handrails, hot deep galvanization, platform and casing in stainless steel...
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Changing of levels in a processing line. Storage of items on pallets or other equipment in warehouse... in any field of production and manufacturing.
|
|
|
|
|
|
The best value in lift tables with unparalleled features! Reduces awkward bending and lifting since the work load is always at the correct level. The possibility of back injuries is also reduced and productivity is increased.
The MAX-Lift is a superior scissor lift table currently offered in the 2000-6000 lb capacity range.
The MAX-Lift Scissor Lift table is a quality table with features such as:
* Integral, retractable maintenance safety bars
* Trapped top & bottom scissor arms
* Grease fittings on pivot points & cam rollers
* Magnetic backed control box allows operator to place controls within easy reach.
* Captured 'Lift-Lok' secures top and base leg rollers and allows for easy maintenance access in lowered position
* Easy access for service. Zerk fittings on camroller and pivot points extend the life of the table by allowing for lubrications in place of throw away, "sealed for life", bearings
The MAX-Lift Scissor Lift Table has a vertical travel range from 24" to 60" and can satisfy most applications. The MAX-Lift Specifications coupled with its unique Features raise the MAX-Lift Scissor Lift Table above any other.
|
|
|
Hydraulic scissors lifts provide the most economical, dependable, and versatile method of lifting heavy loads. Hydraulic lifts have few moving parts, are well lubricated, and provide many years of trouble free operation. These scissors tables raise the loads smoothly to any desired height, and can be easily configured to meet the specific speed, capacity, and foot print requirement of any hydraulic lifting application. Each hydraulic scissors lift is designed and manufactured to meet the industry safety requirements set forth in ANSI MH29.1, and is by far the most popular and efficient of all styles of scissors tables used in material handling applications.
|
|
Up to 50 t load, up to 8 m lift
Short assembly and maintenance times
Durable welded construction
High service life, even for rough, continuous operation
Rapid interchange of all drive components
The guided roller configuration ensures good guidance and a high lateral stability.
All bearings are lubricated for life, regreasable bearing version is also available on request
Easy to service design with exchangeable wear parts
Suspension points at the centre of gravity for crane transport
Maintenance supports for mechanically securing the upper frame
umerous accessories and special designs round off the product range
|
|
HYDRAULIC MONTACARGA
Defined to have solely a column of sustención and guidance of cylinder and platform, which together with its versatility in load and surface, makes extremely adaptable to the needs of the industry.
This one solution allows the access by three points different from plafaforma. what facilitates the load and distribution in conflicting points.
|
|
Model STXXS Double High Lift
This double-high hydraulic scissors lift table allows extended vertical travel with a compact platform length. It is ideal for applications such as sheet-stacking and transferring materials between different levels in a building.
|
|
|
Pflow hydraulic lifts provide reliable and economical vertical lifting for mezzanines, balconies, and other two-level applications. Pflow hydraulic lifts offer heavy-duty construction and advanced safety technology with proven reliability. Our hydraulic lifts are available in straddle or cantilever design.
|
|
|
|
|
|
Hydraulic VRC Material Lift Benefits:
- Lift Capacity: 1,000 to 4,000 lbs.
- Lifting Height: Up to 19 ft.
- Lifting Speed: 20 fpm
- UL-508A labeled control panel
- ’Gate Closed’ indicator light on control panel
- Momentary contact ‘Up’ and ‘Down’ push-button controls
- All control wiring stepped down to 24 volts for safety
- Control panel and hydraulic pump unit ship as a prewired assembly
- Fabricated by AWS D1.1 Certified Welders
- Constructed for “bolt-together” installation. Field welding not required
- All bracing material provided
- Structural grade fasteners and floor anchors provided
- Industrial strength carriage platform handles heavy point loads
- Roller bearings with easy-access grease fittings for all wheels and sleeves
- Hydraulic pump motor sized for continuous duty
- Dual hydraulic rams and lifting cables provide redundant safety
- Hydraulic rams pull, rather than push, for added strength and longer life
- Hydraulic operating pressure maintained below 1,600 psi for extended component life
- Oversized oil reservoir provided to reduce possibility of oil overheating
- Automatic shut-off valves for broken hydraulic hoses
- Manual lowering valve provided for emergency use
- High-flex IWRC lifting cable provides extended service life
- Broken cable free-fall safety cams rated for 7,000 lbs.
|
|
- Standard Lift tables and to measure
- Other products
Tables TEUP, tables of quay,
tilting lift tables,
tables for installation
of workstation,
palletization/depalettisation
- Examples of uses
Logistics/Storage
Bottling
Agribusiness industry
Industry
Pharmacy
Metallurgy
Car
Aeronautics
Glass, wood...
|
|
The tables are manufactured in accordance with current rules for lifting tables and conformed to the EU machine directory and EN 1570.
All the metal parts are cleaned and treated against rust, covered with a lacquer polyurethane 2 components , giving a smooth and tight surface. The frame and the platform are painted in blue RAL 5015. The scissors are painted out of orange RAL 2003.
The tables are designed for a power supply with 3 x 415 V /50 Hz with earth and 0. All motors have 1400 rpm, which weans that the motor has a long life, and a low noise level. The voltage on all functions is 24 V.
|
|
|
|
|
|
LAWECO guaranteeing their customers 'short notice' deliveries within a maximum of four weeks as from January 2002. Not only has the price level been kept unchanged for the majority of products, but quality and safety further improved. This holds especially true for the optimised maintenance free roller bearings. The exclusion of the less costly bush bearings entails a significantly longer operating life and a higher degree of utilisation. The self-contained base frame of the lift table does not require subsequent grouting, thus offering an unrivalled quality standard with its torsion resistant frame construction
LAWECO supplies the scissor arms exclusively of solid material instead of frame sectional steel in order to improve the stability and robustness of the lift tables even more. Freely adjustable limit switches leave the operator with more flexibility and permit him to universally use the lift table within its useful stroke. The maintenance supports are designed for the individual maximum load. The comprehensive installation kit, comprising of dowels, setting screws, shims etc. is included in the price. The lift table can be connected by means of a CEE plug and is supplied ready for installation. The compliance with all required European safety related regulations goes with
|
|
|
|
Lift tables
