|
|
|
The Rolaram actuators are designed for precision applications which require high speed and medium to high duty with loads up to 400kN. There are 8 standard models to choose from with varying options, however all units can be customised to suit your exact application requirements.
|
|
RACO's positioning actuator is equipped with RACO's intelligent positioning motor, a three phase asynchronous motor with servo characteristics.The frequency converter, the position sensors and the position control is built into RACO's positioning motor.
This motor is available in three sizes up to 0.5 kW and it can be adapted to all of RACO's electric actuators, rotary actuators and linear actuators with this range of performance.
Benefits:
positioning regulation with position sensors
full motor protection with current and temperature monitoring
all of the sensor and control components built into the motor
programming with PC mask program
in conformity with electromagnetic directive
positioning accuracy < 0.5 mm
50% cost savings in comparison to conventional servos
stop braking as optional equipment
|
|
|
Electric cylinders are self-locking. So they do not need energy when they stand still. This makes the electric cylinders to be an interesting alternative to pneumatic and hydraulic actuators. Powerful DC motors, signal lines, potentiometers and Hall-ICs for position indication, as well as integrated end switches uncomplicatedly serve for meeting the most frequent requirements.
|
|
Electromechanical remote cylinders
We lead qualitatively high-quality electromechanical remote cylinders, which can replace pneumatics and hydraulic cylinders and save energy, place and river in such a way, while they simplify the control and make an accurate positioning possible.
By the extensive selection of different models we find optimal electrical cylinder for your application, all the same whether small, fast, quietly, high performance, splash-proof or easily.
|
|
SMAC electric cylinders have been designed with the most demanding of automation tasks in mind and are the first real linear motors to challenge pneumatic devices.
They offer long life and much more precise & repeatable force control and positioning than conventional pneumatic devices. The conventional shape and multiple mounting points allow the electric cylinders to be directly retro-fitted in most cases.
Size: 12mm - 75mm diameter
40G Acceleration, 100million+ cycle life.
Compact, Lightweight & Outstanding Performance.
Fully Programmable Force, Position & Velocity.
100 Data Capture & Feed Back Facility.
|
|
A comprehensive selection of linear actuators with programmable control of force, position & velocity. Standard resolution on all SMAC actuators is 5micron with 1micron and half micron options available. They also have a 100% Data Capture & Feed Back Facility.
They are designed to perform at exceptionally high speeds and with a very high degree of accuracy & repeatability. This makes them ideal for a wide range of positioning, measuring, inspection and pick & place applications. Particularly where 100% verification is required.
|
|
|
Integrated modular actuators Series Compact, particularly adapted to the harsh environments. - adjustable electric race ends and/or potentiometer of recopy integrated protector IP65 on request motorizations cd. - mono or TRI.
|
|
Linear electric actuator with integral microprocessor
> Limit switch control
> 7 mm/sec 8000 N (standard)
> 14 mm/sec 6000 N (optional)
> High performance
> Quiet running
> Robust
> Insulation class 1
> Certified to IEC 601-1
|
|
Electric Linear Actuator – INDACT® – Orthogonal-mounted Motor Series
ECO (1,7-100KN)
• Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application.
• 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100).
• Wide range of linear Force/Speed for each size.
• Max nominal force up to 100KN.
• Max linear speed up to 78mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
|
|
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – In-line Series
ECU (0,25-60KN)
• High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications.
• 5 different sizes (ECU0, ECU4, ECU5, ECU6, ECU7).
• Wide range of linear Force/Speed couples for each size.
• Max nominal force up to 60KN.
• Max linear speed up to 466mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with the highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – In-line Series
ECU (0,25-60KN)
• High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications.
• 5 different sizes (ECU0, ECU4, ECU5, ECU6, ECU7).
• Wide range of linear Force/Speed couples for each size.
• Max nominal force up to 60KN.
• Max linear speed up to 466mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with the highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
|
|
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – Orthogonal-mounted Motor Series
ECO (1,7-100KN)
• Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application.
• 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100).
• Wide range of linear Force/Speed for each size.
• Max nominal force up to 100KN.
• Max linear speed up to 78mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
|
Wide selection of sizes, high thrust capacities and broad range of mounting flexibility. Maximum dynamic thrust capacities range from 125 lbs to 4700 lbs. Strokes in any incremental length up to 60 inches depending on body size. Conform to both NFPA and ISO industry mounting standards.
|
|
Linear Actuator AVAMD01 ~ AVAMD05 are installed on the automation of control valves, such as Globe valves.
Linear Actuator AVAMD01 ~AVAMD05 modulating thrust range is from (8.1KN-45.5KN)
-Voltage Supply: 110Vac ~ 660Vac, 50Hz/60Hz, single or three phase.
-Enclosure Protection: IP68, Double-seated structure.
-Isolation: Class F, Class H (optional)
-Output Speed: 18/21rpm ~ 96/115rpm,
-Optional Function:
-Explosion Proof
-Fieldbus System: Modbus, Profibus, etc
|
|
Venture DC Linear Actuators are available in both Acme Screw or Ball Screw versions and combine our Quality Linear Actuators with a DC voltage electric gearmotor providing a ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs
|
|
as an alternative to hydraulic drives
|
|
Compared to their pneumatic and hydraulic "colleagues" electric linear actuators have many advantages:
- constant stroke speed
- no loss of oil
- mechanical self-locking
- almost maintenance-free
- exact positioning
- large number of speed variants
Whenever optimum combinations of load, speed, installation dimensions, precision and robustness are sought, elero actuator and control systems have the answer.
Even in extreme operating conditions such as:
- heat
- cold
- dirt accumulation
our actuators are trouble-free. Special models can be made of stainless steel, for example,to enable our products to be used outside or in the food industry.
|
|
|
|
|
|
LINEAR ACTUATORS STANDARD SERIES
Standard construction (up to 60 kN)
Type: MST - Acme screw drive
Type: MSK - Recirculating ball screw drive
Type: MSP - Planetary roller screw drive
Standard construction (up to 60 kN)
Type: MST / MSK / MSP - E
(Electrical overload protection/"force" switch)
Basic equipment (all models):
Stainless Steel piston rod and trunnion pivot, piston rod with anti-rotation guide and spherical rod-end or galvanised clevis.
Optional equipment:
potentiometer, impulse generator, speedometer, bellows or protective tube, pedestal bearing, various spindle pitches, construction for outdoor use or with aggressive media, safety nut, etc.
Construction with side-mounted motor (up to 60 kN)
Type: MST / MSK / MSP
Construction with side-mounted motor (up to 60 kN)
Type: MST / MSK / MSP - E
(Electrical overload protection/"force" switch)
Construction with worm gear unit (up to 60 kN)
Type: MST / MSK / MSP
Construction with worm gear unit (up to 60 kN)
Type: MST / MSK / MSP - E
(Electrical overload protection/"force" switch)
Construction with flat gear unit (up to 60 kN)
Type: MST / MSK / MSP
Construction with flat gear unit (up to 60 kN)
Type: MST / MSK / MSP - E (Electrical overload protection/"force" switch)
Construction with integral worm gear drive (up to 60 kN)
Type: MST / MSK / MSP
Open design (up to 30 kN)
Type: MST / MSK
|
|
The VecTac VT™ ball screw linear actuator series was developed to provide a high quality, rugged and durable linear actuator for lower force applications. Using a rugged aluminum alloy cylinder and chrome plated heavy wall steel piston, this fluid power replacement linear actuator insures rigid alignment of critical bearing supports.
The VecTac VT™ fluid power replacement linear actuator was designed to accept virtually any manufacturers' motor, has a thrust range of 400 to 2,000 lbs. and a linear velocity capability of up to 40 inches per second.
Its relative small size as well as the ease of adapting to any of the standard unit mounting styles makes the series of VT electric linear actuators a good fit in most linear motion industrial applications. Hall effect and Reed type limit switches are available.
|
|
For applications requiring linear movement, SIPCO offers a complete line of TechnoMotion® products. Please contact us for questions regarding our linear movement products, our inventory, or specific applications.
LINEAR ACTUATORS-ACME and Ball Screw
SCREW JACK-ACME and Ball Screw
BELT DRIVE-Precision Belt Pulleys
PRECISION BALL SCREWS-Ground, zero backlash
BALL SCREWS-Rolled Design
|
|
ternary®
Linear and rotary actuators
For positioning applications where pneumatic exceeds the capabilities regarding:
* Flexibility/programmability
* Repeatability
* Integration with Motion Control systems
* Soft touch
* Force control
* Set up & installation time
* IP-protection
Highlights at a glance
* all in one: motor, controller, actuator/gearbox, fieldbus interface
* Force up to 1000 N
* Repeatability +/- 0,009mm (0.00035")
* Stroke up to 300 mm with ballscrew
* Ratios from 5 to 25 with planetary gearbox
* Speed up to 900 mm/sec
* Maintenance free
* Flange size 32 +46 mm available
* IP protection 65 (linear) / 64 (rotary)
Applications
High speed format changes in packaging & woodworking machines, assembly & dosing systems, semiconductor handling, robots, and many more.
Products
* via PC software
* with Teach pendant
* PLC controlled (parallel I/O)
* Serial field bus
* CANopen
* DeviceNet
* PROFIBUS
|
|
|
Rod type, single-axis robot YMS series features in low cost and yet high performance. Its use in combination with the ERCD controller which has an additional pulse train input function widens versatile application range.
|
|
|
The EC Series of Precision Linear Actuator systems are one of Danaher Motion's highest performing lines. Made to span a wide range of light to heavy-duty application requirements, this family of electric cylinders EC2, EC3, EC4, and EC5 are designed for accurate positioning, long lifecycles, robust profile performance, and maximum power generation. Standard strokes across the family offerings run from 750 mm (30 in) to 1500 mm (59 in) customizable to any length with thrust capacities as high as 25000 N (5620 lbf) and no load speeds up to 1300 mm/s (52.5 in/s). Quality precision rolled ballscrews (or acme) provide for quiet operation and long life.
|
|
Screw type ACME
Weight* 2.95 kg
Protection IP 54
Compatible controller LAK2D/LAK2B
LAK4/LAK6B
Working temperature +5°C ~ 40°C
*Stroke length 200mm
** Option:
[1] IP65
[2] Safety Nut (RL=S+183)
[3] Back fixture turned 90°
|
|
|
|
|
|
Joyce/Dayton - Established 1873
Joyce/Dayton Electric Cylinders are designed for use in industrial environments where protection of the lifting screw mechanism is critical and low maintenance is desirable. Joyce® Electric Cylinders may also be used in place of hydraulic cylinders, eliminating the cost and potential for leaks associated with hydraulic systems.
Joyce offers three Electric Cylinder models: Standard, Motor Mount, and ComDrive.
All Joyce Electric Cylinders incorporate the following features and benefits:
- Ground and hard-chrome plated inner cylinder tube resists harsh contaminants while providing smooth cylinder translation
- Dual lip tube seals retain lubrication while preventing dirt and grime from entering the internal cavity and contaminating the lifting screw
- Durable enamel coated exterior surfaces (epoxy coating available)
- Rigid cylinder tube guide bearings provide resistance to buckling (external guides are required when side loads are present)
- Heat treated alloy steel input shafts riding on tapered roller bearings provide proper worm-gear alignment for increased service life
- Spring-loaded input shaft seals prevent the loss of lubrication
|
|
Acme screw linear actuator with worm wheel geared motor.
Self enclosed end switches.
Maintenance free. Life long lubricant, noiseless running.
DC motor.
Linear speed up to 55 mm/sec
Load up to 6.000 N
|
|
A wide range :
CAT: The modular design concept
CAP: A vast number of possibilities such as motors, front and rear attachments etc.
CAR: A unique standard of performance, durability, and reliability.
MAGFORCE: A spindle lifting drives with worm gears.
Matrix: A powerful AC and DC-actuators
CALA: A compact 12 or 24V DC actuator, intended for industrial use.
ILD: The "Intelligent Linear Drive"
CARE 33: A high dynamic load capacity, silent operation and low current consumption.
RUNNER: A very compact, high performance actuator
|
|
Frame Sizes 2-7inches, 57 – 178mm
Stroke Length 3-18 inches, 75 – 455 mm
Maximum Continuous Force Rating up to 12,000 lbf, 53kN
Maximum Continuous Torque Rating 585 lbf-in, 66 Nm
Maximum Velocity 40in/sec, 1016 mm/sec
Maximum Motor Speed 5000 rpm
|
|
|
|
Electric linear actuators
