Bevel gear reducers

77 companies | 202 products
Filters
  • What’s new?
    Submit
bevel gear reducer / helical - max. 125 000 Nm | FLENDER SIG series

The Bevel Helical Gear Unit is an optimized solutions for the task in the future. This...

bevel gear reducer / right-angle / low-noise / for conveyor belts - max. 173 000 Nm, i= 12.5:1 - 400:1

Not every mine offers enough space for complicated measuring, alignment and installation work. Also the need for specialist personnel to carry out assembly work represents a challenge to many a mine operator. Here, as the worlds only provider to do so, Siemens offers the perfect...

helical gear reducer / bevel / for bucket elevators - i= 18:1 - 80:1, 11.6 - 125 kNm

Siemens presents FLENDER gear units for bucket elevators, which are used for transportation of high volumes of bulk material to varying heights and dumping it without any dust creation. Typically, the height level is more...

bevel gear reducer / for paper machines - max. 820 000 Nm

Today's paper machines are well over 100 m long and, depending on the type of paper, up to 10 m wide, several floors high, and allow production speeds of over 2000 m/min, just to mention...

bevel gear reducer / for hydraulic turbine - i= 5:1 - 28:1, 8.5 - 195 kNm

A water turbine is a turbomachine that converts the potential flow energy contained in water into mechanical energy; this mechanical energy is subsequently converted into electrical energy in a generator....

{{productDetail[7015]}}
helical gear reducer / bevel / right-angle / precision - 10 - 120 Nm, 1:1 - 5:1 | KR series

This right angle gearbox by KR features planetary precision and numerous output and input...

bevel gear reducer / helical / industrial / compact - 28 200 - 210 000 Nm, 5.6:1 - 400:1 | HDO series

The state-of-the-art HDO - Bevel helical gear reducer is a top of the line product designed by Bonfiglioli. It comes in two versions either a single...

bevel gear reducer / right-angle - 3 - 3 000 Nm, 0.15 - 91 kW | RAN series

The RAN - Bevel Gears from Bonfiglioli are developed and created to be able to integrate the function of transmission...

bevel gear reducer / helical - 100 - 14 000 Nm, 0.22 - 150 kW | A series

The A series of BONFIGLIOLI are helical bevel gear motors made to provide...

bevel gear reducer / helical / explosion-proof - ATEX

Bonfiglioli gearboxes are suitable for potentially explosive atmosphere areas. The gearboxes...

{{productDetail[46]}}
hypoid servo-gearbox / helical / bevel / low-backlash - 40 - 1 500 Nm | BSF series

The low backlash BSF helical-bevel servo gear units are designed for the 40 to 1500 Nm (350 to 13200 lb-in) torque classes. The permitted acceleration torques are significantly higher than these values.
These right-angle servo gear units are available...

helical gear reducer / bevel / parallel-shaft / right-angle - max. 475 kNm | X series

The X Series of Helical and helical-bevel gear units from SEW-EURODRIVE are encased in a sturdy gear unit housing and are adjustable to fit exact torque ratings. They...

helical gear reducer / bevel / parallel-shaft / high-torque - 180 - 805 kNm | ML series

SEW EURODRIVE provides the central platform for customized applications with the ML series helical and helical-bevel gear units, utilized for connecting...

{{productDetail[283]}}
helical gear reducer / bevel / parallel-shaft / high-torque - 180 - 805 kNm | ML series

Coming in sizes from small to large, the highly-efficient Tsubaki's gear box also provides an elevated transmission capacity. Years...

{{productDetail[5083]}}
bevel gear reducer / low-backlash / with output shaft - LK+/ LPK+/ LPBK+

Wittenstein's servo right angle bevel gear reducer provides the possible solution in all applications...

{{productDetail[6209]}}
bevel gear reducer / high-torque - i= 1:1 | KEK series

Angular drives with high torques at very low dimensions
Housing: Aluminium, silver...

bevel gear reducer / stainless steel - DZR series

Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.
Housing: Stainless steel...

bevel gear reducer / right-angle - i= 1:1, max. 0.68 Nm | HUG series

The product is at type of a miniaturized right-angle device, that is intended for light duty applications. It...

{{productDetail[66929]}}
bevel gear reducer / right-angle - 450 Nm, 76:1 | GKR

This 2-stage, low-maintenance right-angle gearbox for use in low to medium torque applications is characterized by its high efficiency, lightweight and wear-free gear teeth....

bevel gear reducer / helical / right-angle - 11 639 Nm, 1 936:1 | GKS

The GKS helical-bevel gearbox is a top of the line product designed and manufactured by Lenze. It is designed to deliver accurate and reproducible positioning...

{{productDetail[6239]}}
bevel gear reducer / right-angle / conveyor - i= 21:1 - 2 599:1, max. 13 400 Nm | BBB series

The Bevel Gear, complete with a Cyclo Drive, was designed and manufactured by Sumitomo Drive Technologies. This gear device integrates the adaptable capabilities of a singular-level...

{{productDetail[317]}}
bevel gear reducer / helical / right-angle - i = 11:1 - 26 000:1, max. 159 983 lb.in | Cyclo® BBB4 series

The Cyclo Bevel Buddybox 4 Series of speed reducers and gear motors, for BBB4, are...

bevel gear reducer / helical / right-angle - i = 11:1 - 26 492:1, max. 45 450 lb.in | Cyclo® BBB5 series

The Cyclo Bevel Buddybox 5 Series of speed reducers and gear motors are efficient and may be added for shaft...

helical gear reducer / bevel / parallel-shaft - i = 6.3:1 - 500:1, 4 900 000 lb.in | Paramax® 9000 series

Manufactured with an outstanding technology power transmission by Sumitomo Drive Technologies, the Paramax® 9000 Series are parallel and right...

bevel gear reducer / helical / right-angle / cooling tower - i= 6.3:1 - 15:1, max. 400 000 lb.in | Paramax® SFC series

The Paramax® SFC Cooling Tower and Air Cooled Condenser Drives are utilized for large industrial purposes. They have been specifically...

{{productDetail[15521]}}
bevel gear reducer / helical / right-angle - i= 3.55:1 - 10 000:1 | Browning® OtN 3000

The OTN 3000 Right Angle Helical Bevel Gear Reducers are offered as reducers or gear motors that have a torque capacity up to 120,000 inch pounds. These are enclosed...

{{productDetail[15945]}}
helical gear reducer / bevel - ML series

Spiral bevel gearboxes are designed with helical structure, that are available in models K, L, H, LS, LV, MK, ML, MH and UL sizes that range between 50 to 600 unit...

helical gear reducer / bevel / right-angle - MH series

Spiral bevel gearboxes from Vogel are robust units with corrosion protection and can deliver torques from 10 to 8,500Nm. These are employed for the operation of various...

helical gear reducer / bevel / right-angle - 100 - 13 000 Nm, i= 6:1 - 48:1 | MKS series

The Bevel helical line of gearboxes is fitted with MKS 1 and MKS 4 gear teeth in addition to a K lingelnberg spiral bevel toothing ground. The device features opposite direction rotation...

helical gear reducer / bevel / explosion-proof - ATEX | MKSH series

These ATEX approved helical gearboxes feature the MKSH 1, MKSH 4 Klingelnberg spiral bevel toothing ground. They have rotation direction that is opposite...

bevel servo-gearbox / helical / right-angle - max. 150 Nm, i= 3:1 - 10:1 | SK(N) series

The Servo spiral bevel gearboxes by Vogel Antriebstechnik is a Klingelnberg spiral bevel toothing with a gear teeth of SK (N) 050 SK(N) 200. The direction of its rotation...

{{productDetail[9352]}}
bevel gear reducer / right-angle - max. 100 Nm

The Right-Angle Bevel Gear Reducer, manufactured by Heidrive GmbH, is specifically designed as a gear motor solution....

helical gear reducer / bevel / industrial - max. 80 Nm, IP40

The Gear Motor is ideally designed to provide an excellent quality performance and functionality. The high quality...

{{productDetail[14066]}}
bevel gear reducer / right-angle - max. 380 Nm | KL series

The INKOMA-spiral bevel gear unit type KL comes with the Klingelnberg spiral bevel gear which provides superior transmission of extremely high torque levels. These units provide quiet vibration free running and because of their symmetrical layout,...

bevel gear reducer / right-angle - 3 - 31 Nm | KG series

The KG bevel shaft mounting right-angled gear units (KG-0 to KG-3) are types of bevel gears that are considered compatible with the current Inkoma-precision screw jacks range HSG....

{{productDetail[64801]}}
{{productDetail[14726]}}
helical gear reducer / bevel / right-angle - max. 13 000 Nm | B series

The technological content of B-Series gear reducers allows for an extraordinary performance/lifespan ratio. These highly versatile gear units are successfully used in a vast number of industrial and civil applications. B-Series units offer excellent value for money and output torque/weight ratio, especially considering that they need very limited servicing....

helical gear reducer / bevel / right-angle - max. 450 Nm | BA series

The B-series are highly versatile gear units used vastly for industrial and civil applications having an extraordinary performance to lifespan and output torque to weight ratio. They are available...

{{productDetail[2245]}}
helical gear reducer / bevel / compact - i= 1:1 - 4:1, 15 - 3 000 Nm | N series

Power Jacks' N series are ultra-compact bevel gearboxes equipped with a solid and hollow shaft. These tools are enclosed in a robust SG iron standard housing, and are...

bevel gear reducer / for high torque - i= 1:1 - 5:1, 25 - 5 200 Nm | POWERGEAR series

Power Jacks presents PowerGear bevel gearbox. It offers a high torque with ratings between 25Nm and 5200Nm. It is available in 2-way, 3-way and 4-way designs. Shaft type can be solid...

bevel gear reducer / compact - i= 1:1 - 3:1, max. 50 Nm | P series

The device comes with a compact and lightweight design. This monobloc design is lightweight and comes with 4 bolt hole mounting. There are 2-way, 3-way & 4-way possibility of configuration. The...

{{productDetail[22145]}}
bevel gear reducer / helical / right-angle - i= 0.8:1 - 6:1 | Z series

The Z series is manufactured by Redex, and is a right-angle spiral bevel gear reducer which provides 7 various diameters, 6 model types, and 9 ratios. It...

bevel gear reducer / helical / right-angle - i= 1:1 - 3:1 | R series

The R-Series is an additional family to the Z-Series. The R-Series comes in 3 sizes and 3 different ratios....

helical gear reducer / bevel / right-angle - i= 1:1 - 2:1 | C series

The C series is a line of standard spiral bevel gearboxes manufactured by Redex....

{{productDetail[8191]}}
helical gear reducer / bevel / right-angle - i= 1:1 - 2:1 | C series

Reliance Precision Mechatronics is proud to unveil a range of precision hypoid bevel gearboxes with high accuracy and high speed reduction ratios.

It...

bevel gear reducer - 1:1

The Bevel Gearbox is simple and functional. It is available with 1:1 and 2:1 ratios....

bevel gear reducer - 2:1

The Bevel Gear Reducer, manufactured by Reliance Precision Limited, is designed...

bevel gear reducer - 2:1

The B-Box is a Servo gearboxes manufactured by Reliance Precision Mechatronics. The casing...

{{productDetail[14665]}}
bevel gear reducer - 90 - 400 kNm, ATEX 94/9/EC | Cat.H

The Cat.H is a helical and bevel helical gear reducer which is specifically engineered...

bevel gear reducer - max. 7 100 daNm, ATEX 94/9/EC | Cat.G

The Cat.G is manufactured by Rossi. This bevel gear reducer has a maximum torque capacity of...

{{productDetail[6268]}}
helical gear reducer / bevel / right-angle - i= 3:1 - 200:1, 9 - 2 000 Nm | ABR series

Higher output torque rating by using spiral bevel gear design. 30% more than straight bevel gear.
2. Allows input speeds up to 8 times than with straight bevel gearing.
3....

helical gear reducer / bevel / right-angle - i= 3:1 - 200:1, 9 - 2 000 Nm | AFR series

Higher output torque rating by using spiral bevel gear design. 30% more than straight bevel gear.
2. Allows input speeds up to 8 times than with straight bevel gearing.
3....

{{productDetail[16690]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation