|
|
Induction motors are widely used for automation.
Their simple construction and long life have earned them a place in a extensive variety of applications to power or drive industrial and business machines.
There are broad range of models available for use with or without gear reducers.
These motors are rated for continuous duty and are reversible. |
|
MS and MY series Transtecno motors are closed and fan cooled.
MS series includes induction threephase 4 poles motors
230/400 Vac at 50 Hz and 275/480 Vac at 60 Hz, 4 poles; it
covers power sizes from 0.09 kW up to 1.5 kW. These motors
run quietly and are dinamically well balanced; they match
quality, strength and cheapness.
MY series includes induction singlephase motors 230 Vac at
50 Hz and covers power sizes from 0.09 kW up to 0.75 kW:
they are particular suitable to be mounted on machine for low
power applications.As well as MS series motors, they match
quality and cheapness.
Both series are made in aluminum frame and are available
with B5 or B14 flange mountings.
Standard features for both the series are:
• Class F thermal insulation
• IP55 enclosure protection
• PTO thermostat for overheating protection
• Phases separators between windings: this feature
makes these motors particularly suitable for use with
variable frequency drives.
MY series motors have a large terminal box, which includes
the run capacitor, in order to protect it from external environment. |
|
BM series are asynchronous, three phase, self-braking. BM series power range is from 0.06 kW up to 11 kW. The motor brakes in case of power supply failure. The brake supply is DC as standard with the rectifier built in the terminal box. On request is possible to have a separate brake supply. The rectifier is supplied with an over-voltage and radio frequency emission protection.
BM series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BM series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BM series motors can be provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132. On request 132 frame size motors can be supplied with cast iron frame.
BM series main features are a robust construction, an extremely silent running and braking, the gradual braking action and motor starting, and a notable compactness in dimensions. All MGM motors are CSA approved.
|
|
ASYNCHRONOUS THREE-PHASE MOTOR WITH VERY HIGH- TORQUE A.C. BRAKE - series AMF
FRAME SIZE:
63 ... 160
OUTPUT:
0.12 ... 22 Kw
POLES:
2, 4, 6, 8 (pole changing on request)
INSULATION CLASS:
F
MOUNTING:
IM B3, IM B5 and IM B14 standard and special
DEGREE OF PROTECTION:
IP54 (IP55 on request)
MOTOR FEATURES:
output power on S1 duty
2 and 4 poles motors conforming to EFF2 class efficiency (EFF1 class Efficiency on request)
external fan (IC411)
aluminium frame
BRAKE FEATURES:
electromagnetic spring-loaded brake with release in case of power supply interruption
very high braking torque (Mb > 2 MN)
continuous braking torque adjustment in the range 30% ... 100% Mb max
standard braking torque setted at 70% Mb max (on request 30% ... 100% Mb max )
double braking surface
asbestos-free friction surfaces
high braking capacity, powerful and precise
standard brake supply: 230/400V-50 Hz with separate terminal block (brake supplied directly from the motor terminal block available on request)
DC brake available on request (same braking torque features of ac version)
axial hand release always supplied loose
SPECIAL EXECUTIONS:
efficiency values conforming to EPAct; flywheel, anti-sticking brake disk; degree of protection IP56
TYPICAL APPLICATIONS:
heavy duty, lifting, cranes/bridge cranes, ceramic machines and wherever a very high intervention frequency and a powerful and precise braking is required |
|
BA series motors are asynchronous, three phase, self-braking. BA series power range is from 0.25 kW up to 45 kW. The motor brakes in case of power supply failure.
The brake supply is AC as standard. On request is available a DC brake (the rectifier is enclosed in the conduit box) and or a separate brake supply.
BA series is projected to withstand high overheating guaranteeing high reliability, also under severe operating conditions.
BA series is suitable to be controlled by inverters. The winding insulation class is F. Class H available on request.
Motor enclosure is TEFC, IP54 protection degree (IP55/IP56 available on request). An hexagonal hole is present on the shaft end to allow manual rotation (up to 132 frame size). All the BA series motors are provided with the brake hand release.
Shields and flanges are aluminium made for motors up to 90 frame size, and cast iron for motor frame size from 100 up to 132 mm. On request 132 frame size motors can be supplied with cast iron frame.
Frame, shields and flanges are cast iron made from 160 up to 225 frame size.
BA series main features are the robust construction, a very short braking time, an high and constant braking torque, frequent and heavy braking cycles, rare and easy maintenance. All MGM motors are CSA approve
|
|
Delphi ATDC series self-braking motors use spring-pressure brakes, firmly spliced onto a cast iron shield at the back of the motor.
These motors include:
+ The hand release lever that permits to release the brake, making it possible to move the shaft.
+ The separate brake power supply that is achieved, whenever needed, by connecting directly to the brake terminal board located inside the motor terminal box.
+ The PTO thermal protectors in the winding
Delphi ATDC series maintain also the peculiarities described in the Delphi series catalogue
|
|
| SEW-Eurodrive's squirrel-cage motors and brakemotors deliver exceptional performance and reliability combined with low maintenance. Designed for continuous duty under tough service conditions, these low-noise brakemotors are used wherever fast, safe braking is a major application requirement. |
|
FRAME SIZE:
63 ... 160
OUTPUT:
0.12 ... 22 kW
POLES:
2, 4, 6, 8 (pole changing on request)
INSULATION CLASS:
F
MOUNTING:
IM B3 ,IM B5 and IM B14 standard or special
DEGREE OF PROTECTION:
IP54 (IP55 on request)
MOTOR FEATURES:
output power on S1 duty
2 and 4 poles motors conforming to EFF2 class efficiency (EFF1 class efficiency on request)
external fan (IC411)
aluminium frame
- HIGH TORQUE DC BRAKE - series AMBY
high braking torque (Mb > = 1.5 MN)
step adjustment braking torque (~33%; 67%; 100% Mb max)
double braking surface
progressive and noiseless braking
a.c. brake on request (series AMBZ)
Typical applications: gearmotors, lifting, packing machineries, transfer machineries, automation requiring a smooth intervention
- LOW TORQUE DC BRAKE AND REDUCED OVERALL DIMENSIONS - series AMS
non adjustable braking torque (Mb < = MN)
increased braking torque (+50% of the Mb catalogue value)
single braking surface
progressive (cast iron fan) and noiseless braking
Typical applications: woodworking/cutting machineries, automation requiring progressive braking, wherever a long braking periods and high braking duties are required
SPECIAL EXECUTIONS:
certification cURus; hand release lever; encoder; axial independent cooling fan; double shaft |
|
Product Overview: HPM3545
Description: 1HP,3450RPM,3PH,60HZ,56,YZ,3513M,TEFC,F3
Ship Weight: 33.000 lbs.
List Price: $ 434.00
Multiplier Symbol: K
- TEFC motors designed for continuous duty
- Base mount with SAE A or B pump mount face and shaft
- F3 top-mounted conduit box
Hydraulic pumps for lifts, trash compactors and other machinery
|
|
Applications
Commercial and industrial pumps
Residential pumps (jacuzzis, pools, hot tubs)
Centrifugal pump motor system
Hydraulic pumps
Other
Standard Features
Three-phase, II pole, 60Hz
Voltage: Three-Phase: 208-230/460V or 575V
Squirrel cage rotor
Totally enclosed fan cooled
Ball bearings
Service factor according to NEMA standard
MG 1-18.329
Class “F” insulation (T 80ºC)
Standard: NEMA-MG 1-18.326
Rotation: - Form J: non reversible
- Form C: reversible
Form J: stainless steel shaft end
Paint: RAL 7022
Optional Features
Special voltages
Specially designed shaft
Automatic thermal overload protector
Other mounting configurations
|
|
Series: K2.. 90 to 355
Output range: 0.25 kW to 500 kW
Class: 3,000; 1,500; 1,000; 750 rpm, lower speeds and pole-changeable versions on request
Features: Energy-efficient and environment-friendly, suitable for frequency converter supply, designed to DIN EN 60034 (IEC 72) and pr EN 12101-3, mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, versions for jet fans without shaft-mounted fan or pad-mounted, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H and higher possible, various modifications available |
|
Applications
These smoke removal systems are applied in a broad range of applications including large buildings, shopping malls, factories, warehouses, enclosed parking lots, tunnels, among others. In other words, they are used where a large concentration of people in commercial and industrial facilities is present.
Standard Features
Output: 0.12 up to 355kW
Multivoltage - (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Ventilation Motor, TEAO
Cast iron frames (80 up to 355M/L)
Pad Mounted (frames 80 up to 250S/M)
Mounting: B3L (frame 280S/M and above)
Degree of Protection: IP55
Flying leads 1 meter long
Squirrel cage rotor/Aluminium die cast
Stainless steel nameplate AISI 316
Class "F" insulation
Continuous duty - S1 (S2 - 200°C/2h once only)
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors (1 per phase) fitted in frame 160M and above
Paint color: Silver
Optional Features
Single voltage (other voltages)
Degree of Protection: IP56, IP65 or IP66
Other mounting configurations
Terminal Box
Self Ventilated, TEFC
Thermal protection:
Thermistors for frame 132S and below (Standard for frame 160 and above)
Thermostats
RTD-PT 100
Space heaters
Class "H" insulation
Roller bearings for frame 160M and above
|
|
Output ratings up to 50,000kW (70,000HP)
Voltages ranging from 220 to 13,800V
Speed from 3600 to 300rpm
M Line motors are manufactured in different configurations in reference to cooling methods and degree of protection. As a result, a motor configuration can be defined in such a way to better meet operating and environment conditions.
Motor supplied in frame sizes IEC 280 to 450 (NEMA 4400 to 8000) are manufactured in cast iron frames.
Those motors manufactured in frame sizes IEC 500 (NEMA 8800) and larger have their frames built in welded steel plates.
Main advantages in using WEG M Line motors include:
- High efficiency
- Degree of Protection IP23 (WP-I), IP(W)24 (WP-II) or IP(W)55 / IP(W)56 / IP(W)65
- Reduced noise level
- Low and easy maintenance
- Can be built to meet API 541 standards
- Squirrel cage rotor
Slip ring (wound rotor)
- Bearings
Oil lubricated sleeve bearings
Grease or oil lubricated ball or roller bearings
- Interchangeability with existing motors.
|
|
GAMAR produces a wide range of asynchronous three-phase and single-phase electric motors, as well as self-braking motors with direct-current and alternating-current brakes. the construction features meet the international norm IEC 60034 as wall as the requirements prescribed by (LVD) 73/23 EEC, (EMC) 89/336 EEC e (MD) 89/392 EEC
The product knowledge enables GAMAR technicians to propose, where necessary, a range of solutions for needs different from standard or traditional applications- Our company's offer can solve problems of design engineers and constructors of industrial machinery and plants to be used in various areas. Our main goal is the personalization of motors according to our customers needs thanks to our broad range of products which can solve problems linked to asynchronous motor drive |
|
| Modern industrial machinery must be increasingly faster, more reliable and accurate, energy-saving and must respect the environment. Motors specially designed for each function are therefore required to guarantee this level of performance. Leroy-Somer offers a wide range of electric motors in various technologies: asynchronous, synchronous, brake motors, servomotors, HPM, switch reluctance, DC, motors conforming to NEMA standards, or UL or CSA approved, etc. |
|
* Wide range of standard and special executions to specific demand
* 70% of sales are tailored to customer demand
* Special electrical and mechanical design:
- single, double and triple polarity for fan drives and lifting
- torque, speed and current on customer demand
- single-phase motors with high peak torque
- single-phase motors suitable for operation on 50 and 60 Hz
- special voltages (208V - 60 Hz ... 575V - 60 Hz)
- special sizes, flanges, bearings and shafts
- over 20,000 shaft and flange configurations |
|
| Tubular motors from elero are maintenance-free and have a long life, making them especially suitable for the mentioned applications. Of course, the Type 15 series can be easily combined with the necessary safety technology, such as safety brake and lower rail disconnect, via a motor control unit with radio control. |
|
The quietly running elero drives are reliable, durable and maintenance-free. They offer you the comfort of operating your roller shutters or awnings automatically by pressing a button instead of via crank drives or belts. The easily installed tubular motors can be fitted into shafts from 40 to 98 mm. They require very little space and are protected against overload by a thermal protection system.
|
|
The performance of elero's “JA” venetian blind drives can be perfectly adapted to venetian blinds. These reliable drives operate with high precision and are maintenance-free.
The squirrel-cage motors have an integrated thermal protection and conveniently adjustable limit switches with a range of up to max. 85 revolutions. The limit switch adjusting buttons for the upper and lower end position are individually accessible from the outside. |
|
Many applications in new and old buildings with compact design
The folding shutter is in vogue. Both in old and new buildings, we often choose a conventional and classic solution with a modern design. This solution supports safety, saves energy and is used as a solar protection system. |
|
Series W21R 56 up to 315 efficiency determination to DIN EN 60034, WE1R 80 up to 315 efficiencies to DIN EN 60034 or C390-93, efficiency determination to IEEE112
Output range 0.06 kW to 335 kW
Speeds 3,000; 1,500; 1,000; 750 rpm
Features Energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, class F insulation with thermal reserve, class H available as an option, terminal box optionally top-mounted, RHS or LHS up to frame size 315, various modifications possible |
|
Product Overview: L4003A
Description: .25HP,1725RPM,1PH,60HZ,48,X3411L,XPFC,F1
Ship Weight: 27.000 lbs.
List Price: $ 385.00
Multiplier Symbol: K
- U.L. and CSA approved for Class I, Group D and Class II, Group F & G
- All ratings Class I, Group C & D, and Class II, Group F & G
- Available in 182T through 449T frames (-c models)
- Corrosion resistant epoxy finish
- U.L. approved cast conduit box standard
- 1.00 Service Factor
Ideal for wide variety of applications where hazardous fumes or dust may be present.
|
|
Series: K... 56 to 315
Output range: 0.06 kW to 315kW
Speeds: 3,000; 1,500; 1,000; 750 rpm
Types of protection: "Increased safety" EEx e II 2G, "flameproof" EEx d/de II 2G, "non sparking" EEx nA II 3G, use in zone 21, II 2D, use in zone 22, II 3D
Features: Explosion protection to DIN EN 50014, 50018, 50019 or EN 50021/IEC 79-15 or EN 50281, compliant with ATEX 95 (100 a), energy-efficient and environment-friendly, designed to DIN EN 60034 (IEC 72), mounting dimensions and assignment of output ratings to DIN 42673, 42677 or progressive, robust low-vibration grey-cast iron design, degree of protection IP 55, higher degrees up to IP 65 on request, thermal class F with thermal reserve, thermal class H available as an option, various modifications possible |
|
Applications
Environments containing flammable gases or vapour continuously, intermittently or periodically in enough amount to generate explosive or flammable mixtures arising out of repairs or maintenance services.
The most common locations of Zone 1 and 2, group IIA and IIB are those where the following gases are found present: oil, naphtha, benzene, ammonia, propane, diethylic ether, acetone, alcohol, industrial methane, natural gas.
The main applications include fans, blowers, crushers, conveyor systems, mills, cranes and other applications located in areas that require explosion proof motors
Standard Features
Output: 0.55 up to 315kW
Multivoltage – (220-240/380-415//440-460V or 380-415/660-690//440-460V)
Self Ventilated (TEFC)
EFF2 Improved Efficiency
Cast iron frame: 90S up to 355M/L
Mounting: B3T
Degree of Protection: IP55
Squirrel cage rotor/Aluminium die cast
Stainless steel nameplate AISI 316
Class of temperature T4
Class “F” insulation with T 80K
Continuous duty - S1
Ambient temperature: 40°C , 1000 m.a.s.l.
Regreasing nipples from frame 225S/M and above
Thermistors 150ºC - 1 per phase
Metric thread cable entries in terminal box
Hardened set screws
Internal DE and NDE bearing cap to prevent flame propagation
Machined metal to metal surfaces between frame and terminal box
Earth lug inside the terminal box
Suitable for Inverter Duty applications
Epoxy based paint plan: RAL 5010 |
|
Design EEx e II ignition protection "Increased Safety%u201D type EEx de II ignition protection "Pressure-resistant sealing type, in accordance with ATEX 100a
Main applications areas subject to the danger of explosion such as the chemical and petrochemicals industry, process engineering, drive systems
Special applications environmental technology
Performance range 0,09 - 165 kW
Size 56 - 355
Asynchronous ATB FLEXIDRIVE
Design modular squirrel cage rotor motor as a standard, three-phase motor for low voltages, explosion protected motor, brake motor, single-phase motor
Main applications all types of industrial operations
Special applications -
Performance range -
Size 63 - 90 |
|
|
|
Asynchronous electric motors
